Reviews
Fits: YAMAHA YZ125, YAMAHA WR125, YAMAHA TY250 Z SCOTISH, YAMAHA DT200 WR
Quickly to run
With the Front12T, you will be running Quickly, both on forest roads and in town.
It is affordable and I feel the effect of the replacement.
View detail
Why is the same number of Ding as OEMs so expensive….
What made you decide to buy?
I have been working on the ZX-6R for 3 years now, and the mileage is about 10,000 km. I thought it was too early to replace them, but since all the parts were available during the spring sale, I decided to replace them.
[How was the installation?
I found information that the Torque of the Engine Sprocket nut fixing the front sprocket was halfway tight, so I loosened the Engine Sprocket nut using an electric Impact wrench from Tirefor Replacement. After that, I tightened the rear brake with the torque wrench at the specified torque of 147Nm, and finally, I bent the washer over the nut using the water pump pliers to prevent it from loosening.
*We are planning to describe this replacement work in our maintenance diary. Please take a look if you like.
How was your experience with it?
At first I was not sure whether to go with 16T or not, but I liked the ride quality of the OEM, so I decided to go with 15T, the same as the OEM. So there was no change between before and after the replacement. The normal specifications list on the product page says 16T, but the 21-year ZX-6R has 15T Front, 43 Rear, 2.866 reduction ratio, and 112 Chain links.
View detail
Fits: KAWASAKI Zephyr 1100, KAWASAKI GPZ1000RX, KAWASAKI ZRX1100
OEM alternative.
I have been abusing my car, Clutch, which is 90% safe driving lessons and 10% touring, so it finally slipped. That is why I had no choice. I purchased this one and replaced it.
GPZ900R, but the engine has been replaced by GPZ1000RX, so please be careful when purchasing parts. disc, plate, and spring are one more than 900, and everything is in one pack except Gasket and Oil, so it is easy to change to Large kit. The kit is easy to use and convenient.
The disc corks are painted blue, but the OEM disc has a slit at an angle, but this is a very common type. The cork of the disc has a diagonal slit on the OEM disc, but this disc has a very common type of slit. Before assembly, it was necessary to soak the disc and plate in oil. When assembling the spring, the push rod is pushed, so you must push the center as hard as you can before assembling the spring. If you don't do this, I think you will break Housing.
After the replacement, the clutch lever felt heavier than the Large lever.
We had been using ZX-14 Release and MASTER to reduce the weight of the clutch lever, but after replacing it with this clutch kit, the weight became about the same as that of a NORMAL GPZ900R. Meet point is a little far? I wonder if it was like this.... It is like this.
As for the performance, let me just say Good!"
The clutch was slipping and I had no choice but to replace it with this kit instead of the OEM one. Hopefully, it will last longer than the OEM.
View detail
I should have bought it earlier.
Clutch control is very easy, and above all, the in-gear kick is almost a one-shot instruction!
I would definitely recommend anyone doing HED with 250X!
View detail
having an instant effect
Product Name
Kobo Kitamura Kobo Float Tamura Kobo Kitamura SPClutch lifter plate
Item Number
KITA-H31-03
Vehicles
Honda CRF125F 2024 MODEL
Number of man-hours
Half an hour
Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect.
Why did you choose this product?
I chose this one so that I could improve the cutting of the clutch. I had tried changing it in my previous purchase and felt the effect, so I decided to purchase it.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
The difficulty may be reasonable because it opens Engine.
How was your experience with it?
Front up, etc. is now really easy.
[Included Parts:were they on?
Seal, Instruction Manual, etc. were included.
[Was there anything that disappointed you?
None in particular.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: KAWASAKI GPZ900R
Benefit of having both ends flat
This problem occurs when the clutch release piston of the GPZ900R is changed from the OEM one to the ZZ−R1400 one, which has a slightly larger piston diameter.
ZZ−R1400 Clari Release piston has a sphere embedded in its center, and the sphere end of the push rod and the center of the release piston sphere are slightly gapped, so the sphere end of the push rod and the center of the release piston are gapped if they are left as they are. If the ball end of the push rod and the ball center of the release piston are not properly adjusted, there is a possibility that the ROD will bend and the clutch will not be able to be cut.
The flat end of the rod had been touching the holder of the clutch operating plate and was working properly, but now the ball end is on this side and the flat end is on the release piston side. Reversed. When you do the "+", the HolderCenter is pressed by the sphere, causing it to wriggle and fray. Well, it may be tens of thousands of kilometers away, but it is not good for mental health!
The ends are induction hardened for strength and both ends are flat! I think this product is a large change that will be appreciated by those who have replaced the release piston.
View detail
Fits: KAWASAKI KLX230, KAWASAKI KDX250SR, SUZUKI RM250, SUZUKI DR200, YAMAHA TT250R, YAMAHA TT250R, YAMAHA TT250R, HONDA FTR250, HONDA CRF250R, HONDA AX-1, HONDA CR125, HONDA CR125, HONDA CR125, HONDA CR125, HONDA CR125, HONDA CR125R, HONDA CR250, HONDA CR250, HONDA CR500, HONDA CR500
Genuine DID 520ERVT Replacement Chain Link
I always like to have some of these in stock in case of any issue during fitting different chains. The DID 520ERVT is one I do have in stock but have no spares. I found this chain link by just searching through the DID inventory on Webike website. It was really easy to find so you should be just fine. I ordered a few other different chain links along with this as I do like options with spare links. All were shipped together and this saved some shipping cost. My order arrived in 5 days from being shipped. The chain link came in a nice sealed packet with all that is needed to refit. You do get the white grease packet in this size chain so that's always a good thing, I have a lot of these anyway but you cannot have too many. The chain link is very well made one, it also is in the gold colour so nice looking too and it is also embossed with the DID logo so you know it's genuine. I keep the rivet link type and this clip joint type but had ran out of this version, hence the purchase. Very happy with these small purchases and these will keep me going for future. Thank you Webike. View detail
Fits: SUZUKI High UP R, SUZUKI high up, SUZUKI SEPIA ZZ, SUZUKI Address Tune, SUZUKI SEPIA, SUZUKI AddressWAY, SUZUKI ADDRESS V50Tune, SUZUKI ADDRESS V50, SUZUKI ADDRESS V100, SUZUKI Address EX, SUZUKI Address
The best clutch
very cool quality ordered on March 29, arrived on April 8, installed them immediately, happy with the result, I will order more View detail
The cb750...
WeBig has always been a great help to us.
Thank you very much for your cooperation from now on.
View detail
Fits: KAWASAKI KX100, KAWASAKI KX60, KAWASAKI KX65, KAWASAKI KX80/II, KAWASAKI KX85, YAMAHA PW80, YAMAHA TT-R110E, YAMAHA TT-R50E, YAMAHA TT-R90, YAMAHA DT50, YAMAHA YZ60 81-84
Used for KX112
Used for KX112. The finish and accuracy are sufficient for my needs, and now I can use it on the Enduro. View detail
![VX Series Chain 520VX3 Silver [with Caulk (ZJ) Joint]](https://img.webike-cdn.net/catalogue/images/59741/520VX3_S&S_P_TS.jpg)
Fits: KAWASAKI KLX650SR, YAMAHA TT250R, YAMAHA TT250R, YAMAHA TT250R, YAMAHA SRX400, YAMAHA MT-03, YAMAHA MT-25, HONDA FTR250, HONDA CRM125, KAWASAKI Ninja ZX-6R (ZX636), KAWASAKI KLX230, KAWASAKI KDX250SR, SUZUKI DR200, YAMAHA YZF-R3, YAMAHA XJ6NA, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT03, HONDA CBR500R, HONDA Rebel300
I like the chain
I purchased it on the recommendation of a motorcycle friend at the same meeting. I replaced the chain last year and have been using it for 10 months. Compared to the existing factory chain, the shifting is smooth and the direct connection is very good. I chose silver as the color and it looks very clean, so I feel refreshed every time I drive. -------------------------------------------------- -------- I purchased it on the recommendation of a motorcycle friend at the same meeting. I replaced the chain last year and have been using it for 10 months. Compared to the existing factory chain, the shifting is smooth and the direct connection is very good. I chose silver as the color and it looks very clean, so I feel refreshed every time I drive. Powered by Google Translator View detail
Fits: SUZUKI HI UP, SUZUKI SEPIA, SUZUKI ADDRESS V50(2Cycle), SUZUKI ADDRESS V100, SUZUKI AddressV, SUZUKI Address50
very fast pulley kit
Excellent, now the address 100 goes not 90 km/h but 110 km/h, the transmission is excellent, I recommend it to everyone, well packaged View detail
Fits: SUZUKI High UP R, SUZUKI high up, SUZUKI SEPIA ZZ, SUZUKI Address Tune, SUZUKI SEPIA, SUZUKI AddressWAY, SUZUKI ADDRESS V50Tune, SUZUKI ADDRESS V50, SUZUKI ADDRESS V100, SUZUKI Address EX, SUZUKI Address
Best clutch
The order arrived, the quality of the clutch is excellent, I installed it on my bike, I’m happy with the result. I will recommend it to my friends View detail
Fits: SUZUKI sepia, SUZUKI Let's 4, SUZUKI Let's 4, SUZUKI Let's 4, SUZUKI Let's 4, SUZUKI Let's 5, SUZUKI Let's 5G, SUZUKI Address V50 (4-stroke), SUZUKI Address V50 (4-stroke), SUZUKI Address 110, SUZUKI Address V100, SUZUKI Address 110, SUZUKI Address V100
this is best roller
I ordered the rollers, they arrived on time, Excellent rollers, they weigh exactly as much as indicated, they are very accurately made, you can buy them with confidence! View detail
Fits: SUZUKI Address V100, SUZUKI Address V100, SUZUKI Address V100, SUZUKI Address V100, SUZUKI Address V100, SUZUKI Address V100, SUZUKI Address V100, SUZUKI Address V100, SUZUKI Address V100, SUZUKI Address V100, SUZUKI Address V100, SUZUKI Address V100
nice belt
Fits perfectly on the Japanese scooter Suzuki Address 100, the quality of the belt is at the highest level, the maximum speed and start have become much better, the belt reaches the same radius, it is clear that it is of good quality, well packaged, I am grateful to the seller, I advise everyone, there are no failures, super! View detail
Fits: HYOSUNG GT 650 COMET R, HYOSUNG GT 650 COMET S, HYOSUNG GT 650 COMET, TRIUMPH TIGER 800 XRX ABS, TRIUMPH TIGER 900 RALLY, TRIUMPH TIGER 800 XRT ABS, TRIUMPH TIGER 800 XCX ABS, TRIUMPH TIGER 800 XR ABS, TRIUMPH TIGER 800 XCA ABS, TRIUMPH TIGER 800 XC ABS, TRIUMPH TIGER 800 ABS, TRIUMPH TIGER 800 XC, TRIUMPH TIGER 800, TRIUMPH STREET TRIPLE 765 RS ABS, TRIUMPH STREET TRIPLE 765 S ABS, TRIUMPH STREET TRIPLE 765 R ABS, TRIUMPH STREET TRIPLE 675 R ABS, TRIUMPH STREET TRIPLE 675 ABS, TRIUMPH STREET TRIPLE 675 R, TRIUMPH STREET TRIPLE 675
Genuine JT Sprockets 14t Front Sprocket for Suzuki SV 650 ABS 2008
This bike came in for a service and a new chain and sprockets fitting. This was purchased along with the rear sprocket just for the job. Have used JT sprockets for many years and know they are brilliant quality and do last a long time compared to some other brands. Easy part to find, I was surprised Webikes stocked them really and quite a few different versions for different models and makes. Price was pretty good. Ordered along with other parts so the shipping was good too. Arrived with no faults or issues. The outer box had been sealed with extra tape to ensure, nothing could fall out or escape during transit. Any empty space was filled with air pockets and bubble wrap so nothing could move too much and damage other more delicate parts in the box. The machining of these sprockets is second to none. The spacing for the bolts is perfect. No problems with anything really. I have not found a sprocket that is of high a quality for the similar price range before. I will stick with JT Sprockets. Have fitted before and know how they go on really easy little job. As I said, great quality parts from a great UK company. Thanks Webike for the great service as always and help with anything I need. View detail
Fits: SUZUKI GSX 650 F, SUZUKI GSF 650 BANDIT S ABS, SUZUKI GSX 400 S, SUZUKI SV 650 X ABS, SUZUKI SV 650 S ABS, SUZUKI SV 650 S, SUZUKI SV 650 ABS, SUZUKI SV 650, SUZUKI GSX 650 F ABS, SUZUKI GSF 650 BANDIT S, SUZUKI GSF 650 BANDIT ABS, SUZUKI GSF 650 BANDIT, SUZUKI GSF 400 BANDIT
Genuine JT Sprockets 45t Rear Sprocket for Suzuki SV 650 ABS 2008
This bike came in for a service and a new chain and sprockets fitting. The front was also purchased at the same time so I know I would have all the parts together when needed at hand. I usually already have the chains in stock in various sizes so this did not need ordering. As I ordered a few parts together, the shipping was also a little cheaper which is nice. The order arrived in 5 days from being shipped for the warehouse and all the parts were well packaged. As these are aheavy items, they were kept separate from the lighter ones so no damage was sustained. The sprocket itself is very well made and having used JT Sprockets many times before, I know they do last a long time if you get the steel ones. The aluminium ones do last but not closew to as long as the steel ones. Fitting was straight forward as with all chain and sprocket swaps. Very happy with this purchase. Will be back again View detail
That's what I'm talking about, Mr. OnoSpeed.
The left hand, which was giving me tendonitis, has also been greatly reduced. The installation was a snap, but you have to make sure you adjust the clutch properly, remove the power assist, and adjust the LongRelease properly. If everything was Yellow Pine, it would be the most blissful experience.
The look is great, and the consistency with the Brembo master is perfect.
View detail
Fits: HONDA AA04-PRO, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB110-PRO, HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA MONKEY125, HONDA DAX125, HONDA glom, HONDA SUPER CUBC125
Good quality rear sprocket from KITACO
This is a good quality rear sprocket from KITACO, it's made of steel so it's much more durable than the aluminium ones if a bit more heavy but on the plus side it is a lot less expensive also. This is 32 teeth, it's 2 less than the original 34 one so it's better for top speed. Another good quality product from KITACO as usual! View detail
520Conversion
Chain, I purchased this item from Timing on Sprocket exchange.
The secondary deceleration ratio is now about 2.7, and I can drive Smoothly without feeling a lack of Torque during acceleration. (At first it felt strange when starting off, but once I got used to it, I prefer it this way.)
View detail