Reviews
Fits: SUZUKI Bandit 1250S ABS (BANDIT), SUZUKI Bandit 1250S ABS (BANDIT), SUZUKI GSX1400, SUZUKI Bandit 1250F ABS (BANDIT), SUZUKI GSX1400, SUZUKI Bandit 1250F ABS (BANDIT), SUZUKI Bandit 1250F ABS (BANDIT), SUZUKI Bandit 1250S ABS, SUZUKI Bandit 1250 ABS (BANDIT), SUZUKI Bandit 1250 ABS (BANDIT)
OEM compatible Sprocket
BANDIT1250 F total mileage 85750km,Recently, I was concerned because the Chain was making a clattering noise.
Since I am a novice mechanic, I enjoyed replacing bearings and tires by trial and error, but when I inspected the front sprocket, I realized it was time to replace it. So I went to Webig and searched for parts and found OEM products and interchangeable parts. After considering how long I would be driving the car, I decided to go with the interchangeable parts.
To replace it, we had to have more Socket on hand, but we replaced it successfully and immediately ran a TEST run.
As I thought, the noise of the Chain disappeared and it became quiet and smooth. I will be able to go out for touring this Season with peace of mind.
View detail
Fits: SUZUKI LetsII (LETS Two), SUZUKI LetsII (LETS Two), SUZUKI LetsII (LETS Two), SUZUKI Lets (LETS), SUZUKI LetsIIS (LETS Two S), SUZUKI LetsIIL COMBINATION BRAKE (LETS Two Elle Combination Brakes), SUZUKI LetsIIL (LETS Two L), SUZUKI LetsIIL (LETS Two L), SUZUKI LetsIIG (LETS Two Gee), SUZUKI LetsIIDX (LETS TwoDELUXE), SUZUKI LetsII COMBINATION BRAKE (LETS Two Combination brakes), SUZUKI LetsII (LETS Two), SUZUKI LetsII (LETS Two), SUZUKI LetsII (LETS Two), SUZUKI Vecstar 150 (VECSTAR), SUZUKI Vecstar 150 (VECSTAR), SUZUKI Verde (VERDE), SUZUKI Verde (VERDE), SUZUKI Verde (VERDE)
High-quality variator rollers of reduced weight
About quality and texture The rollers are of the highest quality, their wear resistance has been tested for a long time, the bushing never falls out of the plastic roller, reliable fastening inside, precise weight for each roller, maximum deviation of 0.05 grams, and it doesn’t matter whether the rollers are 18 grams or 8, precision very high About the feeling of use The mileage on this product was more than 10,000 kilometers, a quiet ride, but sometimes there is a lot of rapid acceleration and deceleration, I think that they will survive even more with completely quiet use, I think this is good wear resistance at such a low price Products to buy together No additional purchases are required if you only need to replace the variator rollers Difficulty of installation Easy installation to replace old rollers, no special tools required Cost performance and comparison with other products Low price, even if there are 3 pieces in one package, which means 2 packages are required, but the quality of this product is comparable only to the original About shipping and packaging Simple blister packaging, can be seen in the photo, no damage was found during delivery Any concerns, cautions, or advice when purchasing Please note that only one package contains 3 rollers, 6 pieces required, which means 2 packs I used this 15 gram roller weight for a better start on the Suzuki Address 110, this product fully met expectations, weight accuracy, good wear resistance View detail
NTBSprocket
I purchased this product because the one I had been using was on the verge of being damaged.
I still have to see how durable it is, but I think it will be fine as long as it is an OEM Equivalent Product.
I was relieved to receive the order the next day and was able to exchange it right away.
View detail
R1-ZSprocket
I was worried about compatibility since it is not an OEM Product, but it came on perfectly. View detail
NTB
Good afternoon. I really liked this product . There are eight sliders for the variator . I ordered for a friend . He really liked the product too . The quality is on top ! I highly recommend this product ! View detail
Fits: HONDA TACT (TACT), HONDA TACT (TACT), HONDA TACT (TACT), HONDA TACT (TACT), HONDA TACT (TACT), HONDA TACT (TACT), HONDA TACT (TACT), HONDA TACT (TACT), HONDA TACT (TACT), HONDA TACT (TACT), HONDA TACT (TACT), HONDA TACT (TACT), HONDA TACT (TACT), HONDA Live Dio・S (LIVE DIO), HONDA Live Dio J Special LIVE DIOSPECIAL Knife), HONDA Live Dio J Special (LIVE DIOSPECIAL Knife), HONDA Live Dio (LIVE DIO), HONDA Live Dio (LIVE DIO), HONDA Julio (JULIO), HONDA Julio (JULIO)
Driving about 1000 km
I installed it on my AF24TACT and drove about 1000km and so far no problems. View detail
Fits: HONDA GYRO Canopy (GYRO CANOPY), HONDA GYRO Canopy (GYRO CANOPY), HONDA GYRO X (GYRO X), HONDA GYRO X (GYRO X), HONDA GYRO X, HONDA GYRO CANOPY
Anyway cheap
I purchased a GYRO CANOPY with a mileage of 70.000 km and test drove it.
It would rise, but its maximum speed was 35 km/h. Therefore, Belt wear." and speculate,
I purchased an OEMBelt Weight Roller, disassembled it, and found that the Pulley and Pulley face were clearly
Wear was confirmed. Once the Belt and Weight Roller were replaced, a test run was conducted and the speed recovered to a maximum of 51 km/h.
(My CANOPY is already registered as a MINI car)
The pulley, pulley face, and clutch were replaced at the same time at a later date.
The quality is comparable to that of OEM products and the price is also competitive.
It is affordable. After the replacement, the maximum speed is now 56 km/h, as I had hoped.
Now we are hoping for durability.
View detail
Anyway cheap
After purchasing GYRO CANOPY with 70.000 km mileage,
We immediately inspected the drivetrain and found that Pulley's
Pulley face and the
We replaced them at the same time.
The finish is comparable to OEM products and the price is very reasonable.
It is affordable. After the replacement, the maximum speed increased by 5 km as I had hoped.
Now we are hoping for durability.
View detail
Fits: SUZUKI ADDRESS (Address), SUZUKI choinori, SUZUKI choinori, SUZUKI Lets (LETS), SUZUKI Lets (LETS), SUZUKI LetsII (LETS Two), SUZUKI LetsII (LETS Two), SUZUKI LetsII (LETS Two), SUZUKI LetsII (LETS Two), SUZUKI LetsII (LETS Two), SUZUKI LetsII (LETS Two), SUZUKI LetsII (LETS Two), SUZUKI LetsII COMBINATION BRAKE (LETS Two Combination brakes), SUZUKI LetsII Standard (LETS Two Standard), SUZUKI LetsII Standard (LETS Two Standard), SUZUKI LetsIIDX (LETS TwoDELUXE), SUZUKI LetsIIG (LETS Two G), SUZUKI LetsIIG (LETS Two G), SUZUKI LetsIIG (LETS Two Gee), SUZUKI LetsIIL (LETS Two L)
High quality and wear resistant variator sliders
About quality and texture
High quality sliders, durability comparable to the original product, white color, like the factory one, tactilely identical to the original part, wear resistance at a high level, tested by years of use
About the feeling of use
I have been using these sliders on my equipment for a very long time, at the moment they have been installed on one moto since 2016 and have already traveled more than 5 thousand kilometers, I think for the money that these sliders cost - this is an excellent result, and after this run the wear is not visible and not noticeable, the operation of the variator is also correct and replacement is not required, I think that the mileage to critical wear will be at least 10 thousand kilometers
Products to buy together
Includes 3 sliders, no additional purchase required to replace them
Difficulty of installation
Easy installation in place of old parts, just remove the variator and replace
Cost performance and comparison with other products
Very low price and high quality, there are no competitors, even if this product cost much more - it would be worth the money
About shipping and packaging
Simple packaging in a bag, integrity during transportation is not broken
Any concerns, cautions, or advice when purchasing
Tip - only take into account the manufacturer's recommendations regarding the compatibility of parts
---------------------------------------------------------------- About Quality and Texture High quality sliders, strength is comparable to the original product, white, as well as the factory, tactilely identical part with the original, wear resistance at a high level, is tested for years of use ABOUT THE FEELING OF USE For a long time I have been using these sliders on my technique, at the moment they have been installed on one Moto since 2016 and have already traveled more than 5 thousand kilometers, I think for the money that these sliders are a wonderful result , and after this run is not visible and not tangible, the work of the variator is also correct and replacement is not required, I think that the run to critical wear is at least 10 thousand kilometers Products to Buy Together Included 3 slides, for their replacement, it is not required to buy anything additionally Difficulty of Installation Easy installation in place of old parts, just remove the variator and replace COST Performance and Comparison with Other Products Very low price and high quality, competitors do not exist, even if this product cost much more - it would cost this money ABOUT SHIPPing and PACKAGING Simple packaging in a package, integrity during transportation is not violated Any Concerns, Countions, or Advice When Purchacing Council - only take into account the recommendations of the manufacturer regarding the compatibility of parts Powered by Google Translator
View detail
Fits: YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Renaissa (RENAISSA), YAMAHA Renaissa (RENAISSA), YAMAHA Renaissa (RENAISSA), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO)
VIRAGO250 Rear Sprocket
Replaced OEMRear Sprocket.
It is inexpensive, but it is made with confidence.
View detail
One of the highest quality OEM belts
About quality and texture
The belt is made according to the manufacturers' factory recommendations, so the NTB brand can be trusted unambiguously
This part is made of aramid, strong enough, like the factory original belt, stitching from a strong thread
The size is completely identical to the original in size, this is OEM production under the control of the manufacturer of motorcycles for which these parts are made
About the feeling of use
The belt survives runs of 10 thousand kilometers without any problems, since for such equipment this is an insignificant mileage, you need to be sure of the quality of spare parts, there are no problems here, full compliance with standards
Products to buy together
Only the belt is included, what needs to be bought for maintenance is decided only by the owner
Difficulty of installation
Easy installation in place of a worn belt, without unnecessary problems
Cost performance and comparison with other products
Low price compared to the original spare part, while not inferior in quality
About shipping and packaging
The packaging is visible in the photo, the belt is wrapped in a cardboard package with markings and compatible equipment
Any concerns, cautions, or advice when purchasing
Always consider the compatibility of parts with your scooter, for the most correct operation of the transmission.
-------------------------------------------------- -------- About Quality and Texture The belt is made according to factory recommendations of manufacturers, so the NTB brand can be trusted unequivocally This part is made of aramide, quite strong, like the factory original belt, a stitching of a strong thread The size is completely identical to the original in size, this is precisely OEM production under the control of the manufacturer of motor vehicles, for which these parts are made ABOUT THE FEELING OF USE The belt experiences runs of 10 thousand kilometers without unnecessary problems, since for such a technique this is a slight mileage, you need to be sure of the quality of spare parts, there are no problems here, complete compliance with the standards Products to Buy Together Only the belt in the comic, which must be bought for service is decided only by the owner Difficulty of Installation Easy installation in place of a worn belt, without unnecessary problems COST Performance and Comparison with Other Products Low price compared to the original spare part, not inferior in quality ABOUT SHIPPing and PACKAGING The packaging is visible in the photo, the belt is wrapped by cardboard packaging with labeling and compatible equipment Any Concerns, Countions, or Advice When Purchacing Always take into account the compatibility of details with your scooter for the most proper transmission operation Powered by Google Translator
View detail
Fits: SUZUKI STREET MAGIC (STREET MAGIC), SUZUKI STREET MAGIC
Quality variator rollers
To YamahaSEROW.
I bought it to use for SEROW, but I couldn't use it for Initial Model. I could not use it due to lack of confirmation, but I'm glad I could use it for my friend's SEROW. View detail
Fits: YAMAHA VOX (Box), YAMAHA VOX (Box), YAMAHA VOX (Box), YAMAHA VOX (Box), YAMAHA VOX (Box), YAMAHA VOX (Box), YAMAHA Vino Molfe (VINO Molar feh), YAMAHA Vino Molfe (VINO Molar feh), YAMAHA VINO Molfe (VINO Molar feh), YAMAHA VINO Molfe (VINO Molar feh), YAMAHA VINO Molfe (VINO Molar feh), YAMAHA Vino (VINO), YAMAHA Vino (VINO), YAMAHA Vino (VINO), YAMAHA Vino (VINO), YAMAHA Vino (VINO), YAMAHA Vino (VINO), YAMAHA Vino (VINO), YAMAHA Vino (VINO), YAMAHA Vino (VINO)
sa-26j
I installed it on a REMOTE CONTROLLERVINOsa-26j that was given to me by a friend.
The replacement time is about 60 minutes even for an amateur, including cleaning of the inside of the case.
Torque tightening is Primary 30Nm Clutch housing 40Nm.
View detail
Fits: HONDA Giorno Crea, HONDA Giorno Crea, HONDA Smart Dio (SMART DIO), HONDA Smart Dio (SMART DIO), HONDA Smart Dio (SMART DIO), HONDA Smart Dio (SMART DIO), HONDA Smart・Dio DX, HONDA Smart・Dio DX (SMART DIO), HONDA Smart・Dio DX (SMART DIO), HONDA Smart・Dio DX (SMART DIO)
AF57 Honda SMART DIO Weight roller6g
I used a 8g weight roller last time, but 6g is not too bad. It is a little sluggish at the start, but after 2 seconds, it accelerates quickly. If you use it with High Speed Pulley, you can accelerate without worrying about the flow of cars. View detail
Fits: SUZUKI Address V50, SUZUKI Address V50, SUZUKI Lets5G (LETSFive G), SUZUKI Lets5G (LETSFive G), SUZUKI Lets5G (LETSFive G), SUZUKI Lets5(LETSFive), SUZUKI Lets5(LETSFive), SUZUKI Lets4G (LETS Forge), SUZUKI Lets5(LETSFive), SUZUKI Lets4G (LETS Forge), SUZUKI Lets4G (LETS Forge), SUZUKI Lets4 (LETS4), SUZUKI Lets4 (LETS4), SUZUKI Lets4 (LETS4), SUZUKI Lets4 (LETS4), SUZUKI Lets4 Pallet (LETS for Palette), SUZUKI Lets4 Pallet (LETS for Palette), SUZUKI Lets4 Pallet (LETS for Palette), SUZUKI Lets4 Pallet (LETS for Palette), SUZUKI Lets4 Pallet (LETS for Palette)
It seems a little thin.
Parts to replace for now when you get a used Scooter
It's NTBBrand, which is cheap and reliable, so it doesn't seem particularly problematic, but it also seems slightly thinner than OEM.
Well, it's on and running, so I don't think it's a particular problem.
View detail
Installed on ESTRELLA2014
I was able to install it on ESTRELLA2014MODEL.
2014MODEL (or later? up to Final?) is fixed with a square nut, unlike previous MODELs, so we used a 22mm octagonal socket and an Impact wrench to replace it.
I found an article on the Net that said the generator cover (the one with the inverted triangle) had to be removed, but we were able to replace it without removing it.
I am very satisfied.
View detail
Satisfied.
Very satisfied, will buy again next time! View detail
Mounted on ESTRELLA2014
I learned that the OEM of ESTRELLA2014MODEL is 40 guns, but the previous ESTRELLA was 38 guns, and since it was time to replace them, I replaced them.
When I compared the parts list between the 2014 model and the applicable car model, the rear hub looked the same shape and the part number was the same, so I thought it would work and bought it.
However, since the reduction of two fingers caused the Chain to loosen, we shifted the Axle Shaft position by 2 ticks of 10mm to pull it backward.
I thought this was a good idea, although I felt that acceleration was slower, it took more force to turn the Tire, and Smoothness was lost a little.
The SHIFT UP timings are now about 2 beats slower than before, which makes the ride more enjoyable.
I haven't been able to take it on the highway yet, so I've only taken it up to a maximum speed of 60 km/h. I can hardly tell the difference in 5th gear×4000 rpm = about 60 km/h, so I have the impression that I'm getting more fun in the low speed range.
View detail
Fits: SUZUKI Address V50, SUZUKI Address V50, SUZUKI Lets4 basket (LETS4Basket), SUZUKI Lets4 Pallet (LETS for Palette), SUZUKI Lets4 (LETS4), SUZUKI Lets4G (LETS Forge), SUZUKI Vecstar 125 (VECSTAR), SUZUKI Vecstar 150 (VECSTAR)
LETS4Palette (CA45A) OEM of 11.7 g×3
OEMWeightRoller- replaced with the same etc. product because it was worn out.
0.It is about 2g lighter, but it is considered to be within the range that is not noticeable in city driving.
The quality is good and the price is reasonable.
5.5g× I'm sure 6 or so would be fine weight-wise, but what's the difference between 3 and 6?
View detail