Reviews
Fits: GASGAS 515 EC 09, GASGAS 515 SM 09, GASGAS 450 SM FSE 09, GASGAS 450 SM 09, GASGAS 400 SM FSE 03/04, GASGAS 400 EC FSE 02, GASGAS 450 EC FSE 03-11, GASGAS 300 EC 00, GASGAS 250MC 02, GASGAS 250 ENDURO 01-04, GASGAS 250EC ENDURO 97-00, SUZUKI DJEBEL250, SUZUKI DJEBEL250 XC, SUZUKI COBRA, SUZUKI WOLF250, SUZUKI RGV250 (Gamma), SUZUKI DR-Z400S, SUZUKI DR250S, SUZUKI DR350, SUZUKI DR350
FinalLong adjustment
I installed it on HUSQVARNA's 2014 SM250R and had to adjust it to Long with Rear Sprocket only due to difficulty in sourcing anything other than Number of teeth on the OEM for this year.
There is a lineup for up to 40 guns in a separate BRAN, but the lineup for 39 guns and below was only in XAM.
I purchased and installed it to drive on the SUGOCircuit and was able to reach a maximum speed of about 160 km/h without overrevving.
View detail
Fits: HONDA CB1100EX, HONDA CB1100RS, HONDA CB1100
For CB1300SB
The reason why I bought it is because I started to feel hand strain due to my age when touring more than 300km, and also because the size 16Φ or 17.5Φ Radial master that I wanted was too expensive for me to afford (laugh).
There are about 4 companies with similar products, but we chose this one because the OEM parts number was the same for CB1100 and 1300 (SC54), although it was not in the list of compatible models. After the exchange It's dramatically lighter." I would like to say that it is a good thing, but perhaps it is because of the Brush-boost effect of the exchange. "Slightly lighter?" I got used to it as soon as I started running, and to be honest, it was a bit of a challenge. It's not that different. the impression that
Clutch master is also about OEMs, Meet Point I think I'm getting a little ahead of myself." I got used to it very quickly. It's not that different. Spring is the only thing that can pull it off. So much lighter!" and I just posted a picture of it, what you see with your eyes and what you actually hold in your hands. Light/heavy." Since each person has his or her own sense of Disappointing. I am sorry to say that I did not use this product. If you are looking for a dramatic change, I think Radial master (note the size) is more Large in effect.
I bought the product in Black Anodized Finishing (I thought the color didn't matter because I couldn't see it, but it's actually cool and has a nice texture).
View detail
Fits: KAWASAKI Z650, KAWASAKI Z250, KAWASAKI VERSYS, KAWASAKI VERSYS, KAWASAKI Ninja400, KAWASAKI Ninja250, KAWASAKI Ninja ZX-6R (ZX636), KAWASAKI Ninja 650, KAWASAKI KLX230, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250, SUZUKI SV650X, SUZUKI SV650, SUZUKI SV650, SUZUKI GSX250R, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZ250X, YAMAHA MT-03, YAMAHA MT-25
not enough length
I checked the compatibility chart and bought it.
It was insufficient length.
It's an old car, so it can't be helped?
I should have checked the number of Piece of the actual car.
View detail
Fits: HONDA XLR200, HONDA XR230, HONDA XLR250, HONDA XR230MOTARD, HONDA SL230, HONDA XR250, HONDA CRF230F, HONDA FTR223, HONDA XL230, HONDA CRF150F, HONDA XLR250, HONDA FTR250
FTR223 to 14T
The OEM FTR223 has 13 GEARs, but I bought the 14T because I wanted to change the number of GEARs.
Install with care, paying attention to the reverse side (the side with the engraving is the reverse side), and remove the chain, etc. A lot of work and kills are required.
The 14T is a custom that can benefit mainly from long touring, but I think it is not so merit for those who usually run only short distances.
There is also a Torque reduction at medium and low speeds, and I had the impression that the 13-gauge is easier to handle when the speed often used is around 40 to 60 km/h.
If high speed cruising from 70 km to Main is your main goal, 14T will give you a different ride, but for those who do not drive Long, I feel that it is easy to become Demerit on the contrary.
I think it would be a good idea for those who are considering purchasing this product to take into account how they usually use it, as it can be rather troublesome to change it back because you don't like the way it feels after you replace it. By the way, I returned it because I felt it was not suitable for my daily use.
View detail
Cosmo
The accuracy of the Sprocket is lower than that of other companies' Sprocket. (The difference between where the Chain is stretched and where it is not is large.)
However, if you take this into consideration and Chain tension the product, I think it is a good cosmetic product.
View detail
520Conversion Demerit
It is cheaper than collecting OEM parts, and as you all know, there is a Merit to make the 520. However, the Noise when driving will be Large.
It sounds like the sound when the bottom of the teeth of the front sprocket (Driven Sprocket) hits the Roller of the Chain.
The OEM Sprocket has a Ring-shaped anti-vibration Rubber, which reduces Noise.
As a countermeasure, I had some DAYTONAInsulation Glass WoolSeat left over from a previous purchase at Webig, so I attached this to the inside of the Sprocket Cover.
As an effect, Noise became much smaller.
View detail
Bolt hole in rear sprocket is Large
It is cheap and good, but the only thing that bothers me is that the Bolt hole on the Rear sprocket is Large. I'm worried that it might move during use. View detail
Fits: SUZUKI GSX-R750/R, SUZUKI GSF650/S oil-cooled(05-06), SUZUKI GSX750F oil cooling, SUZUKI VZ800 MARAUDER (97-02), SUZUKI GSX-R1100 530conSize), SUZUKI DESPERADO800/X(97-), SUZUKI RF600R(93-), SUZUKI GSX600F oil cooling, SUZUKI GSF600/S oil cooled(95-04), SUZUKI GSX-R1100 [oil cooled] 530con size), SUZUKI GSX750F[GR78A/GR7GA]Oil cooled, SUZUKI GSX-R750/R [oil cooled], SUZUKI GSX600F[GN72A/GN79A]Oil cooled, SUZUKI DESPERADO800/X(97-), SUZUKI VZ800 MARAUDER [Marauder](97-02), SUZUKI GSF650/S[Bandit]Oil cooled(05-06), SUZUKI GSF600/S[Bandit]Oil cooled(95-04), SUZUKI RF600R(93-), SUZUKI DESPERADO800/X(97-), SUZUKI VZ800 MARAUDER [Marauder](97-02)
AFAMAfamRear spokeROCKET (Steel)
I was looking for a Steel spot ROCKET that can be used with GSXR110 Wheels.
I think they will last longer than the ones we used before.
Unfortunately, it is Painted.
View detail
It looks good
When I combined the ratio of Lever's MASTER to Release's MASTER at 1:1, it became heavier than OEMWire.
The Brake was also replaced together, so it is unified and looks very good.
View detail
Fits: HONDA V-TWIN MAGNA, HONDA CL400, HONDA CBX400F, HONDA CB400SS, HONDA STEED400, HONDA STEED600, HONDA CBR500R, HONDA CB400FOUR, HONDA VFR400Z, HONDA VRX Roadster, HONDA XRV750 AFRICATWIN, HONDA VF1000R, HONDA VF400F INTEGRA, HONDA VFR400R, HONDA VF750F, HONDA VF400F, HONDA VF1000F, HONDA VF1000F interceptor, HONDA CBR400F, HONDA STEED400
520Conversion
Conversion520 from 530. It is easier to push and move. View detail
Fits: HONDA REBEL(REBEL)500, HONDA CRF450RX, HONDA CRF450L, HONDA CRF250M, HONDA CBR400R, HONDA CBR250RR, HONDA CB250R, HONDA 400X, HONDA 400X, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZ250X, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI GSX250R, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650X, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250
Used for SL230.
I bought this for touring with my SL230. If I had the budget, I would have purchased a plated or anodized coated chain, but this time I compromised with steel. I chose this one because I can ride long touring without worrying about durability and maintenance (although of course I will maintain it after long touring).
I have only used it for about 500 km, but the surface has rusted due to moisture, my fault for choosing Steel, but I am disappointed. Next time I will buy one with surface treatment.
View detail
Fits: KAWASAKI Z400FX, KAWASAKI Z400FX, KAWASAKI Z1000 R Edition, KAWASAKI Z1000 R Edition, SUZUKI GSX1100F, SUZUKI GSX600F, SUZUKI GSX600F, SUZUKI GSX600F, SUZUKI GSX-R1100, SUZUKI GSX600F, SUZUKI GSX600F, SUZUKI GSX600F, KAWASAKI ZX-9R, KAWASAKI Z900SE, KAWASAKI Z900RS SE, KAWASAKI Z900RS SE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE
Suitable for highways, sluggish in town
The front sprocket does not loosen unless the Impact wrench is turned at the maximum Large Power to install it. From the next time, it can be turned manually.
Also, if you do not take the Bracket on the Cover of the Sprocket, the Cover will not be attached.
The Metropolitan Expressway and the Tomei Expressway are not different.
The start of the road down the road is sluggish and doesn't fit.
(Normally, up to 16T would be good.)
Quantity assuming Fuji Speed way:Set, so will try in April.
On the other hand, we plan to try 14T in Tsukuba and other areas.
View detail
Fits: HONDA MONKEY 125, HONDA NSF100, HONDA CROSS CUB50, HONDA SUPER CUB 50 PRO, YAMAHA YZ65, KAWASAKI KLX110L, KAWASAKI Z125 PRO, HONDA APE100, HONDA APE100 TypeD, HONDA ATC70, HONDA BENLY90S, HONDA C50 SUPER CUB 50 Custom, HONDA C50 SUPER CUB 50 Standard, HONDA C50 SUPER CUB 50 DELUXE, HONDA C50 SUPER CUB 50 BUSINESS, HONDA C50 CUB press 50, HONDA C50 CUB press 50, HONDA C50 CUB press 50, HONDA C50L LITTLE CUB, HONDA C50LM LITTLE CUB
Rear Sprocket purchased with tooth count change
Purchased to change the number of Chain pieces when changing the number of teeth on the Rear Sprocket. clip type is easy to adjust as it can be removed as many times as needed. View detail
Fits: HONDA NSF100, HONDA NS50R, HONDA NS-1, HONDA NS50F, HONDA APE 100 TypeD, HONDA NSR mini, HONDA XR100MOTARD, HONDA NSR50, HONDA APE TypeD, HONDA XR50 MOTARD, HONDA NSR80
Rear Sprocket replacement
The Rear of the installed product seemed to be getting a little sharp, so I bought this new one to replace it with a new one along with replacing the Chain with a new one.
The price was not that much, which was helpful.
It looks Black and does not look bad.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY BAJA, HONDA GORILLA, KAWASAKI Z125 PRO, KAWASAKI KX100, KAWASAKI KLX110L, SUZUKI TS50W, HONDA TLM50, HONDA NSR50, HONDA C90 SUPER CUB 90, KAWASAKI KSR110, HONDA C70 SUPER CUB70, HONDA C50LM LITTLE CUB, HONDA C50LM LITTLE CUB, HONDA C50L LITTLE CUB, HONDA C50 CUB press 50, HONDA C50 CUB press 50, HONDA C50 CUB press 50
Chain assembly
The chain was stretched, so I cut it and used it for reassembly.
Installation does not seem to be that difficult since it is a Clip.
View detail
Fits: HONDA MONKEY 125, HONDA NSF100, HONDA CROSS CUB50, HONDA SUPER CUB 50 PRO, YAMAHA YZ65, KAWASAKI KLX110L, KAWASAKI KX100, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI Z125 PRO, HONDA APE100, HONDA APE100 TypeD, HONDA ATC70, HONDA BENLY90S, HONDA C50 SUPER CUB 50 Custom, HONDA C50 SUPER CUB 50 Standard, HONDA C50 SUPER CUB 50 DELUXE, HONDA C50 SUPER CUB 50 BUSINESS, HONDA C50 CUB press 50, HONDA C50 CUB press 50
exchange
The Chain we are using is getting old and we are purchasing this to replace it.
The price is not that high, and the Enhanced Version is said to be 20% stronger than the standard version, so I expect the rest to be long-lasting.
It would have been nice if there were RANups in other colors besides Steel to choose from.
View detail
Low durability
Cut the Crimp section with a sander.
The Screw part was installed incorrectly and the Screw
It has become a biting experience.
There appears to be no parts supply for this Screw.
It appears that we will have to purchase a new one.
Then I'll buy ChainManufacturer's.
I began to think.
I thought it was not durable enough to replace Chain frequently.
Occasionally, it is enough for those who change it.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1100, KAWASAKI ZRX1200
appearance
OEMPlate tends to crack, so I bought it for its appearance!
Check the position of the holes when installing.
I think the product is done by punching out the outside, but that process is sweet.
Looks and feels TEXTURED!
After installation, you can only see the sides, so I think we need to take care of that first.
Also, Anodized is not processed well, Red but not dyed well.
I know it's a cheap product, but I'd like to see them do a better job in that area.
I can't tell from a distance.
View detail
Quantity:1 Set of 6pcs.
Quantity:I purchased 1 Set of 6pcs. and thought the price was normal. View detail
Invisible part
The Chromoly steel may be more durable than the OEM product. It is not that the durability of the OEM product is bad in the first place, it is just a self-fulfillment. It is not that the durability of the OEM product is bad in the first place. View detail