Reviews
Fits: KAWASAKI ZXR400 R 89 H2, KAWASAKI ZXR400 89 J2
Ninjah2
It was very good. It looks great now. View detail
Fits: YAMAHA YZF-R6, YAMAHA YZF-R1, SUZUKI TL1000S, KAWASAKI ZX-9 R, KAWASAKI ZX-6 R, KAWASAKI ZX-12 R
In use on YZF-R6 08.
The shape is almost the same as OEM and I have no problem with it, but I would like to increase the Gold alumiteParts.
The Handlebar area is visible from the Rider, which is satisfying and nice!
It is inexpensive and easily looks Fashion.
I feel that the holes are somehow Race ish, meat grilled, not OEM.
If I had to say something, I would say that if it gets scraped off, the Anodized will go bald and Silver will come out, so it will probably not be touched too often.
View detail
Fits: YAMAHA YZF-R6, YAMAHA YZF-R1, SUZUKI TL1000S, KAWASAKI ZX-9 R, KAWASAKI ZX-6 R, KAWASAKI ZX-12 R
One point
One point and OEM were rusted and discolored, so they were replaced. I think it is stylish and good. I think it is also somewhat lightweight. View detail
Fits: SUZUKI BANDIT 1200, SUZUKI GS1200 SS, SUZUKI GSF1200
Good
It was the color I was expecting. I'm glad I bought it. View detail
Fits: HONDA MONKEY
Changed from the same ManufacturerGold!
I used to use the same Manufacturer Gold Nut before, but the screw thread became wrong and this is the one I purchased a replacement It's light and looks great It's best not to close it too hard View detail
Fits: KAWASAKI KSR1, KAWASAKI KSR2
The product was guaranteed to fit, but it doesn't fit
I bought it for the KSR2 and actually installed it, but the M6×16mm is the Quantity:Less than 2pc
M6× I had three too many 30mm
It was an expensive product, but I did my best to buy it because it was guaranteed to fit
It was a disappointment
It is currently being supported by We-Big, but the M6×16mm BoltQuantity:I can get 2pc
That would be most helpful, but..
View detail
Fits: HONDA MONKEY
If the price is a little lower, it's a good choice
I used the same product Gold as this one
You can remove and put it on and off every time you do the setting
Because I applied a little force when I tightened it, I ruined a Screwball mountain
I'm going to re-purchase the blue one this time
Since DrivenSprocket spacer is also installed, this time without washer I'll install it
(I'm changing the Bolt, which is a little long, but when I put in Washer, it doesn't take until the end to get the Nut
View detail
Fits: HONDA MONKEY
Just the right amount of tightness!
We did a RearDrivenSprocket exchange for MONKEY
I had to remove and install it about 3 times because it was a little bit displaced
One of the threads was ruined because I tightened it too much
Material:It's Aluminum, so it's better to tighten it appropriately
I'm currently a Gold Sprocket and will buy Blue again
View detail
Fits: YAMAHA YZF-R6, YAMAHA YZF-R1, SUZUKI TL1000S, KAWASAKI ZX-9 R, KAWASAKI ZX-6 R, KAWASAKI ZX-12 R
Fashionable from the root
Because we have arranged Gold in some places
I bought it with other shopping.
Somewhat, it became fashionable.
I am satisfied because I can purchase at this price.
I will replace it when it becomes useless.
View detail
Fits: HONDA MONKEY [MONKEY]., HONDA MONKEY [MONKEY].
One point ♪
I bought it to match the color of Chain and Sprocket.
I like it myself ♪
The object itself is lighter than the OEM.
I would like to see how long we will be durable.
View detail
Fits: KAWASAKI ZX-12 R, KAWASAKI ZX-6 R, KAWASAKI ZX-9 R, SUZUKI TL1000S, YAMAHA YZF-R1, YAMAHA YZF-R6, KAWASAKI ZX-12 R, KAWASAKI ZX-6 R, KAWASAKI ZX-9 R, SUZUKI TL1000S, YAMAHA YZF-R1, YAMAHA YZF-R6
Dress-up effect can be expected cheaply
I attached it to MT-09.
Since it was thing that it could be installed in YZF R - 1, I ordered it because it was the same ProductNo with reference to the Parts List on Net.
?Good point?
- Making without inferiority to OEM
- Because the hole is opened for weight reduction? Race ish looks
?I like it?
- I'm wearing Dura Bolt's Button bolt on the other part, but a color slightly thinner than Button bolt
Unlike around Brake around Clutch around MT - 09 it looked like a bicycle Brake with a plain feeling.
Adjuster became a gorgeous feeling by adding it at one point.
As you can see in the picture, I replaced Screen with Button bolt made by the company.
The color of Adjuster is somewhat thinner when compared.
I do not mind that much separately, but it seems better to keep in mind those who are considering purchasing from now.
Even if it does not appear on the list of corresponding models, I think that it can be diverted to other car models if I check the model number of OEM Parts Number in Parts List like my MT - 09.
It is appreciated that you can buy this quality item with only a little investment of only 1000 yen.
It rarely breaks, but I will try to Repeat when it fades and deteriorates.
This time I really did a good shopping.
View detail
I installed it on HONDA CB600F HORNET PC41 (MY2007).The original one had been damaged, so I bought this one for both replacement and decoration. I chose the blue one, same color as my bike, and it looks nice.I needed to remove the clutch lever and
I installed it on HONDA CB600F HORNET PC41 (MY2007).
The original one had been damaged, so I bought this one for both replacement and decoration. I chose the blue one, same color as my bike, and it looks nice.
I needed to remove the clutch lever and loosen the cable to install this part. I took me about 5 minutes.
View detail
The Dress-up effect up was also previously exchanged on the occasion of a Maintenance of a Clutch cable. The appearance of the circumference of the Handle also looks nice, and tone is also satisfactory at good touch. Since making itself was soli
The Dress-up effect up was also previously exchanged on the occasion of a Maintenance of a Clutch cable.
The appearance of the circumference of the
Handle also looks nice, and tone is also satisfactory at good touch.
Since making
itself was solid, it was able to attach satisfactorily also about wearing.
I think that a Recommendation can be carried out as an One-point Customization since it is vivid tone although it is small parts.
View detail
[ -- the Webike Monitor ] -- it is exchange from pure black. working hours are 2 and 3 minutes. I think that it is good for a Dress-up of the circumference of the Handle up.
[ -- the Webike Monitor ]
-- it is exchange from pure black.
working hours are 2 and 3 minutes.
I think that it is good for a Dress-up of the circumference of the
Handle up.
View detail