Reviews
The Screw part was too long to use…
In my case, I tried to install the Sensor via Adapter on my CB1100, but the part where the Screw is cut was too long to fit.
Also, Bolt is also Large, so diversion seems to be strictly necessary.
It is very inexpensive for its price range, so it looks Large sturdy if you assume machining or if you can afford the length of the Oil drain Screw.
View detail
Fits: YAMAHA BWS100(BWS), YAMAHA RX100, YAMAHA GRAND AXIS
It's nice to have a wider range of Settings.
I had been using NCY's Pulley face for about 20,000 km, but the face surface was starting to wear off, so I looked for a new face and bought this one.
NCY has been used up to now.
14 degrees 90g Flat where the boss hits
The new KOSO is
13.8 degrees, 114g, Type with a dent where the boss hits.
The angle of the Face surface is not stated in the product description, and after inquiring with KN Planning, we were told that it is 13.8 degrees.
I didn't have room for a Bose Washer at NCY.
KOSO can add as much as 0.5mm without difficulty, so the range of setting is wider.
View detail
Lukewarm Commuter Motorcycle Becomes Vibrant and Fun Motorcycle
The Clearance of the Slide Piece is too narrow, so it is better to reduce it a little. Thanks to the light weight roller, the engine will run more energetically and lightly, and the fuel consumption will be reduced by 15% to 20%. View detail
Fits: YAMAHA BWS125(BWS), YAMAHA BWS125(BWS), YAMAHA VINO125, YAMAHA VINO125
Colors changed.
The gPrint section will soon be scraped off and will no longer be visible, so it is easy to see now that the color has been renewed and changed from Orange to Blue. View detail
Fits: YAMAHA Cygnus X, YAMAHA Majesty 125, YAMAHA BWS125, YAMAHA BWS125X, YAMAHA Axis Street, YAMAHA S-MAX, YAMAHA Majesty S., YAMAHA Vino 125, YAMAHA Bino Bianco, YAMAHA Vino Bianco R, YAMAHA NMAX125, YAMAHA NMAX150, YAMAHA NMAX155, YAMAHA SV-MAX, YAMAHA AEROX125, YAMAHA AEROX155, YAMAHA FORCE 155, YAMAHA Tricity 125, YAMAHA Tricity 155., YAMAHA Cygnus SV
I've been using this for a long time
I have been using this product for CYGNUS X for many years since the Normal engine days.
I have tried many Weight Rollers, from OEM Weight Rollers to DoctorPulley, and this product is the best overall.
First of all, there is no back and forth orientation, so there is no chance of accidental insertion.
Many Weight Rollers have a fixed orientation, and if you put them on in the opposite direction, the Pulley will be shaved.
The life of the roller is longer, and the outer diameter of the roller seems to be shaved off later than those of other companies. In particular, I have found that the cheap No Brand Weight Rollers have been shaved so hard that they sometimes turn into RoseRose inside, but this product has excellent durability.
Also, the bright brown color makes it easy to find even if it rolls around the garage. The bright brown color makes it easy to find as it rolls down the Garage. I like the color that stands out because the pure black Weight Roller is invisible in the shadows.
I use an electronic scale that can measure down to 1/100th of a meter, and there is almost no Rose variation when new, with an error of about 0.02.
If I had to say, I would be happy if the weight of the Weight Roller was written on the inner diameter so I don't have to measure it every time.
I am currently running the engine at more than 10,000 rpm with the engine bored up, and it has survived for one year without replacement.
View detail
Fits: YAMAHA Cygnus X, YAMAHA Majesty 125, YAMAHA BWS125, YAMAHA BWS125X, YAMAHA Axis Street, YAMAHA S-MAX, YAMAHA Majesty S., YAMAHA Vino 125, YAMAHA Bino Bianco, YAMAHA Vino Bianco R, YAMAHA NMAX125, YAMAHA NMAX150, YAMAHA NMAX155, YAMAHA SV-MAX, YAMAHA AEROX125, YAMAHA AEROX155, YAMAHA FORCE 155, YAMAHA Tricity 125, YAMAHA Tricity 155., YAMAHA Cygnus SV
parts exchange
It seems that most of the Motorcycle shops near me do not stock Scooter parts. Webike has a large selection of parts and you can choose the part that best fits your motorcycle. This time I chose Racing weightRoller. Now it is easy to ride. View detail
Listing photos and Included Parts:List.
I'm very disappointed that the pictures on the website and the items on the product list have changed quite a bit ^^;
Clutch Spring is Quantity:It's not in the set, and the weight roller is 15g in the list and 16g in the box....
View detail
![Adjustable Clutch [KN Made-to-Order Model]](https://global.webike-cdn.net/photo/impression/c1/c14249857e9545dc11b5f736e72d5298L.jpg)
Fits: YAMAHA JOG, MBK NITRO50, YAMAHA AeroX50
Purchased for JOG 3KJ 3-Clutch.
Influenced by JunkScooter repair uncle in Eastern Europe, I bought it.
Discontinued? The quality will be the same because the appearance is the same as that of a certain manufacturer of Germany.
It's a new product, but the hexagonal screw was sticking. So I prepared another hexagonal screw and tightened both of them solidly, then I turned only One Side and loosen it.
It's heartbreaking because it bucks and loosens up.
The weight is also included, so you can make it into a lightweight or heavy weight clutch.
I think it's a good idea to buy these items instead of buying a half-assed Lightweight Clutch because they allow you to get the best setting.
As for the performance of the Clutch itself, the external 2 piece Lightweight Clutch was slipping and making the Outer slippery and shiny. (Spring rate may have been weak OR strong). It's a good thing I've been using three of them because they definitely bite.
View detail