Reviews
Fits: DUCATI PAUL SMART1000LE, DUCATI Multistrada 620, DUCATI Multistrada 1100/S, DUCATI MONSTER900, DUCATI MONSTER1100/S, DUCATI MONSTER S2R1000, DUCATI HYPERMOTARD1100EVO, DUCATI HYPERMOTARD1100EVO SP, DUCATI HYPERMOTARD1100/S, DUCATI STREETFIGHTER, DUCATI STREETFIGHTER S, DUCATI SPORT1000, DUCATI SBK 916 1994-99, DUCATI Multistrada 1000 2003-06, DUCATI MONSTER S2R, DUCATI 999, DUCATI 998, DUCATI 996, DUCATI 749, DUCATI 748
Clutch Spring, to fix Retainer
The bolt that holds the clutch spring and retainer in place was damaged, so I replaced it with this one. I used this bolt on a 94 M900 with no problems. View detail
Fits: MV AGUSTA Brutale 1000 RR, MV AGUSTA Brutale 1000 Serie Oro, MV AGUSTA Brutale 3 cilindri 675, MV AGUSTA Brutale 3 cilindri 800, MV AGUSTA Brutale 3 cilindri 800, MV AGUSTA Brutale 3 cilindri 800 RC, MV AGUSTA Brutale 3 cilindri 800 Rosso, MV AGUSTA Brutale 3 cilindri 800 RR, MV AGUSTA Brutale 3 cilindri 800 RR, MV AGUSTA Brutale 4 cilindri 1090, MV AGUSTA Brutale 4 cilindri 1090 Corsa, MV AGUSTA Brutale 4 cilindri 1090 R, MV AGUSTA Brutale 4 cilindri 1090 RR, MV AGUSTA Brutale 4 cilindri 920, MV AGUSTA Brutale 4 cilindri 990 R, MV AGUSTA Dragster 800, MV AGUSTA Dragster 800 RC, MV AGUSTA Dragster 800 Rosso, MV AGUSTA Dragster 800 RR, MV AGUSTA F3 675
Drivetrain Upgrade
Compared to OEM parts, the RingGEAR is a lightweight spec. and is the best ring gear for upgrading.
The load under the spring is also affected, and I would like to refer to this for future impressions of driving performance and fuel economy.
However, FrontGEAR-Quantity of chain etc.:We believe that this is a set of parts that need to be replaced.
RingGEAR is also suitable for dress-up.
View detail
Fits: DUCATI MONSTER 1200S, DUCATI MONSTER 1200R, DUCATI MONSTER 1200, DUCATI HYPERMOTARD796, DUCATI HYPERMOTARD1100EVO, DUCATI HYPERMOTARD1100EVO SP, DUCATI HYPERMOTARD1100/S, DUCATI DIAVEL, DUCATI DIAVEL, DUCATI XDiavel, DUCATI STREETFIGHTER848, DUCATI SS900, DUCATI SS800, DUCATI SS750, DUCATI SS1000, DUCATI PAUL SMART1000LE, DUCATI Multistrada 620, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S Touring
I think Clutch has lightened up a bit.
I bought this one with a slightly larger diameter than the OEM one because it is very hard on my Left hand when I frequently turn off the Clutch in town or in traffic.
The installation was done by Dealer.
Instruction Manual is a CNCRACING product, so a simple one is Quantity:1pc. was.
It has been 3 or 4 years since installation and there is no fading of the Anodized.
After installation, Clutch seems a little lighter, but you will be disappointed if you expect it to be much lighter.
View detail
Fits: DUCATI SS1000, DUCATI PAUL SMART1000LE, DUCATI MONSTER900, DUCATI MONSTER1000, DUCATI MONSTER S4Rs testastretta, DUCATI MONSTER S4R, DUCATI MONSTER S2R1000, DUCATI ST4, DUCATI Multistrada 1000 2003-06, DUCATI SPORT1000, DUCATI ST2, DUCATI ST3, DUCATI 999, DUCATI 998, DUCATI 748, DUCATI 749
Judder was terrible.
Judder was terrible in the second half of Clutch meat, although he didn't slip.
I hadn't driven it in 9 years, so I was wondering if the anti-crap was too long, but it's been 5 months and 2000km. I rode it, but it was still the same, so I replaced it.
Thank goodness it's CNC and cheaper than OEM or Surflex.
ParenthesisIt arrived in a nice CNC box.
The printed InstallationGuide, which is mentioned in the product description, was included in the package, and I was able to exchange it for the first time without any problems.
The friction plate was degreased and assembled, even though it said to remove grease from the plate.
As expected, the new one is beautiful. It is also quiet, which makes us want to replace the pressure plate and spring with HoleCover.
After the replacement, I went for a run and the Judder was gone and it was easier to start the car.
It seems that it was Judder caused by Plate distortion, and I'm glad we were able to solve the problem.
View detail
Fits: DUCATI XDiavel, DUCATI Multistrada 950, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S Pikes Peak, DUCATI Multistrada 1200S Touring, DUCATI Multistrada 1200S Pikes Peak, DUCATI Multistrada 1200S Granturismo, DUCATI Multistrada 1200, DUCATI Multistrada 1200, DUCATI Multistrada 1200, DUCATI Multistrada 1200 Enduro, DUCATI MONSTER1100EVO, DUCATI MONSTER 821, DUCATI MONSTER 1200R, DUCATI MONSTER 1200S, DUCATI MONSTER 1200, DUCATI DIAVEL, DUCATI HYPERMOTARD939, DUCATI DIAVEL
If you want to use Clear Clutch Cover, you can also use this.
I purchased this along with the RingPressure plate when I purchased the Clear Clutch Cover.
The installation was done by Dealer.
It has been quite some time since I installed it and I have had no problems.
The combination of the Clear Clutch Cover, RingPressure plate, and this is quite noticeable.
View detail
![RingPressure plate Oilba ScratchDUCATI [RING PRESSURE PLATE OIL BATH CLUTCH DUCATI]](https://global.webike-cdn.net/photo/impression/28/284b78f32fb59be1a2582b4eedcf81f1L.jpg)
Fits: DUCATI Multistrada 1200, DUCATI Multistrada 1200 Enduro, DUCATI MONSTER 1200R, DUCATI MONSTER 1200, DUCATI Multistrada 950, DUCATI Multistrada 1200S, DUCATI HYPERSTRADA, DUCATI HYPERMOTARD939, DUCATI XDiavel, DUCATI Multistrada 1200S Pikes Peak, DUCATI Multistrada 1200S Touring, DUCATI 959Panigale, DUCATI DIAVEL, DUCATI 1299Panigale, DUCATI 1299 Panigale S, DUCATI MONSTER1100EVO, DUCATI 1199Panigale, DUCATI 1199Panigale S/Tricolore, DUCATI 1199Panigale R, DUCATI MONSTER 821
Since we're here.
I bought it in conjunction with the purchase of the Clear Clutch Cover, rather than purchasing it later.
It is a triangular RingPressure plate that rotates. There are several colors to choose from, so it is a good idea to combine them with the colors of the Clear Clutch Cover.
This product itself is not very expensive.
View detail
Fits: DUCATI Multistrada 1200S, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S Touring, DUCATI Multistrada 1200S Pikes Peak, DUCATI Multistrada 1200S Granturismo, DUCATI Multistrada 1200S Pikes Peak, DUCATI Multistrada 1200, DUCATI Multistrada 1200, DUCATI MONSTER 1200S, DUCATI Multistrada 1200, DUCATI MONSTER 1200, DUCATI MONSTER 1200R, DUCATI DIAVEL, DUCATI DIAVEL, DUCATI STREETFIGHTER, DUCATI STREETFIGHTER S, DUCATI 1299Panigale, DUCATI 1299 Panigale S, DUCATI 1199Panigale, DUCATI 1199Panigale
Rear Sprocket.
I bought this Sprocket from CNCRACING to replace the Sprocket as well as the Chain replacement.
Since I changed the number of hinges on the Front Sprocket, I made this Sprocket the same as the OEM hinges.
I overlooked that the CNCRACING Sprocket is simply not interchangeable with the OEM Sprocket, so I purchased and installed an additional one. You have to look closely at the product description.
I like the product itself.:Since it's Aluminum, I'm a little concerned about how durable it is, but it's still Large sturdy, even though I've driven about 10,000 miles since it was installed.
View detail
Fits: DUCATI XDiavel, DUCATI SuperSport, DUCATI SuperSport S, DUCATI Multistrada 1260S, DUCATI Multistrada 1260, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S Touring, DUCATI Multistrada 1200S Pikes Peak, DUCATI Multistrada 1200S Pikes Peak, DUCATI Multistrada 1200, DUCATI Multistrada 1200, DUCATI Multistrada 1200S Granturismo, DUCATI MONSTER 1200S, DUCATI Multistrada 1200, DUCATI MONSTER 1200R, DUCATI MONSTER 1200S, DUCATI DIAVEL, DUCATI MONSTER 1200, DUCATI MONSTER 1200
Sprocket's Flange.
I bought this Flange with Black as a Base to change from OEM to match the Chain exchange.
I'm happy with the texture and other aspects of the car as it fit my car better than I expected.
Performance is Flange, so I don't know.
However, the Flange and Sprocket cannot be installed by CNCRACING alone, so it will cost you quite a bit of Gold to replace them.
I like the way it looks after it's installed.
View detail
Fits: KTM 1290 SUPER ADVENTURE, KTM 1290 SUPER DUKE R, KTM 1190 RC8R, KTM 1190 Adventure
If it's for dress-up purposes
I purchased this in the hope that Clutch would be lighter, but I do not feel that it became lighter
You might want to think of it as for dress-up
View detail
Fits: KTM 1190 Adventure, KTM 1190 RC8R, KTM 1290 SUPER ADVENTURE, KTM 1290 SUPER DUKE R
Clutch operation is now lighter
Original was using Magura's mineral oil, but I have a brembo I wanted to use the Clutch master and bought this version for DOT As a result, the reduction of the operation force which cylinder diameter is larger than the original can be experienced The diameter of the master is 18mm The current master diameter is 18 and a PHI; but there is still room to cut, so if you make it 16 and a PHI, you will be able to use it Even the original was not so heavy But I felt it was hard when I was in traffic jams on touring etc I have not yet run in traffic jams after a conversion, but I look forward to how I feel I think that a conversion can be done easily if there is a certain amount of kill I had a Babyface SpindleHolder attached to it, but I couldn't install it at present In addition to DOT support, I am thinking of installing it by devising something It seems to me that the operation can be reduced when not replacing the master as well, since the products of the It is View detail
Fits: DUCATI HYPERMOTARD1100/S, DUCATI DIAVEL, DUCATI DIAVEL, DUCATI XDiavel, DUCATI STREETFIGHTER848, DUCATI SS800, DUCATI SS900, DUCATI SS750, DUCATI SS1000, DUCATI PAUL SMART1000LE, DUCATI Multistrada 620, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S Touring, DUCATI Multistrada 1200S Pikes Peak, DUCATI Multistrada 1200S Pikes Peak, DUCATI Multistrada 1200S Granturismo, DUCATI Multistrada 1200, DUCATI Multistrada 1200, DUCATI Multistrada 1200
Good for Ducati
This piece of clutch slave makes the use of the clutch a lot easier. I feel very soft. It makes me do not have to finger pain. And tortured with riding Ducati motorcycle View detail
Fits: DUCATI MONSTER 1200S, DUCATI MONSTER 1200R, DUCATI MONSTER 1200, DUCATI HYPERMOTARD796, DUCATI HYPERMOTARD1100EVO, DUCATI HYPERMOTARD1100EVO SP, DUCATI HYPERMOTARD1100/S, DUCATI DIAVEL, DUCATI DIAVEL, DUCATI XDiavel, DUCATI STREETFIGHTER848, DUCATI SS900, DUCATI SS800, DUCATI SS750, DUCATI SS1000, DUCATI PAUL SMART1000LE, DUCATI Multistrada 620, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S Touring
Good clutch slave
This CNC Racing Clutch Slave is installed on my Ducati Multistrada and it makes gear shifting much easier. I can feel the softness in use. It is more smooth than Clutch Slave attached from production. View detail
Fits: DUCATI SS1000, DUCATI PAUL SMART1000LE, DUCATI MONSTER900, DUCATI MONSTER1000, DUCATI MONSTER S4Rs testastretta, DUCATI MONSTER S4R, DUCATI MONSTER S2R1000, DUCATI ST4, DUCATI ST3, DUCATI ST2, DUCATI SPORT1000, DUCATI Multistrada 1000 2003-06, DUCATI 999, DUCATI 998, DUCATI 749, DUCATI 748
It works normally
I used it to replace the Clutch on my 1993 ducati 900ss
It seems to be difficult to enter Neutral, but the Clutch cuts off without a problem, and the time You will fit in
I was able to replace the Clutch cheaply and it was very helpful
View detail
Fits: DUCATI Multistrada 1200, DUCATI Multistrada 1200 Enduro, DUCATI Multistrada 1100/S, DUCATI Multistrada 1000 2003-06, DUCATI MONSTER S4Rs testastretta, DUCATI MONSTER1100/S, DUCATI MONSTER1100EVO, DUCATI MONSTER900, DUCATI MONSTER800, DUCATI MONSTER796, DUCATI MONSTER750, DUCATI MONSTER696, DUCATI MONSTER695, DUCATI MONSTER620, DUCATI MONSTER600, DUCATI MONSTER1000, DUCATI MONSTER S2R1000, DUCATI MONSTER S4R, DUCATI MONSTER S2R, DUCATI MONSTER 1200R
Compared with NORMAL, it got so lame.
Since 1200s comes out of power, if it is NORMAL Clutch is heavy and you are addicted to traffic and the tragedy.
Buy this product trying to lighten it.
I got the desired lightness.
When installing, there are parts of the cylinder not to be used, and when this is attached, the state of Clutch is always disconnected.
Digression
At 696 bremboRCS16Clutch master exchanged Touch and lightness came out.
Although we transplanted MASTER from 696 this time, the weight of Clutch was hardly improved, Clutch at the time of Oil low temperature could not be disconnected, and when it was not waiting for the signal to enter Neutral it endured with heavy Clutch holding it.
After exchanging for this Clutch release, I expected the improvement of Touch, but it is only thought that I make it to Neutral before stopping to make Neutral state at low temperature again.
There are many things that Neutral does not come out even if pulling out MAXClutch by pulling out my finger.
Also, Start dash is not used to Clutch 's Touch yet, SPORTS MODE, but Clutch meat emphasis.
Still struggling with Axel By Wire's sense of incompatibility and Ting connecting Clutch
View detail
Fits: DUCATI SS1000, DUCATI PAUL SMART1000LE, DUCATI MONSTER900, DUCATI MONSTER1000, DUCATI MONSTER S4Rs testastretta, DUCATI MONSTER S4R, DUCATI MONSTER S2R1000, DUCATI ST4, DUCATI ST3, DUCATI ST2, DUCATI SPORT1000, DUCATI Multistrada 1000 2003-06, DUCATI 999, DUCATI 998, DUCATI 749, DUCATI 748
It is better to stop this
Clutch can not be completely disconnected in normal wearing because no flat surface appears even though it is brand new
Because it's bent, I can not run straight with Clutch dragging
I should have chosen a different product, even if I check it on the platen it was a plan accuracy that surpassed the specified value of Service manual to Large width
I managed to take strain and get Clutch to be the largest and grabbed my fingers with 4 fingers Finally I entered Neutral from 1st speed, it was a typical example of cheap worse
View detail
Fits: DUCATI STREETFIGHTER848, DUCATI Multistrada 1100/S, DUCATI MONSTER796, DUCATI MONSTER1100EVO, DUCATI MONSTER1100/S, DUCATI MONSTER S4Rs testastretta, DUCATI MONSTER S4R, DUCATI MONSTER S2R1000, DUCATI HYPERMOTARD939, DUCATI HYPERMOTARD821, DUCATI HYPERMOTARD796, DUCATI HYPERMOTARD1100EVO, DUCATI HYPERMOTARD1100EVO SP, DUCATI HYPERMOTARD1100/S, DUCATI 748, DUCATI 848, DUCATI 848EVO, DUCATI 996, DUCATI 998, DUCATI HYPERMOTARD821
Next time for Replacement
Currently using CNC Racing Sprocket. I thought it was at the next exchange, it seemed that delivery was going to take place so I ordered - - - I came soon. (Lol) View detail
Fits: DUCATI Multistrada 1200S, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S Touring, DUCATI Multistrada 1200S Pikes Peak, DUCATI Multistrada 1200S Pikes Peak, DUCATI Multistrada 1200S Granturismo, DUCATI Multistrada 1200, DUCATI Multistrada 1200, DUCATI Multistrada 1200, DUCATI MONSTER 1200S, DUCATI MONSTER 1200R, DUCATI MONSTER 1200, DUCATI DIAVEL, DUCATI DIAVEL, DUCATI STREETFIGHTER, DUCATI STREETFIGHTER S, DUCATI 1299Panigale, DUCATI 1299 Panigale S, DUCATI 1199Panigale, DUCATI 1199Panigale
Purchased by Brand name
Since Brand named CNC Racing has been concerned for a long time and we are dealing with Wae Big, I purchased it.
Because it is Made in Italy, I am worried that making is more complicated than JAPAN, but it is a wonderful item that overturns expectations.
Material : Since Aluminum, Life seems to be shorter than Steel, but as long as it has a regular Maintenance, there will be no problem.
We will also purchase next time when the lifespan comes, so please do not end the handling until that time Well Big.
View detail
Fits: DUCATI Multistrada 1200S, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S Touring, DUCATI Multistrada 1200S Pikes Peak, DUCATI Multistrada 1200S Pikes Peak, DUCATI Multistrada 1200S Granturismo, DUCATI Multistrada 1200, DUCATI Multistrada 1200, DUCATI Multistrada 1200, DUCATI DIAVEL, DUCATI DIAVEL, DUCATI STREETFIGHTER, DUCATI STREETFIGHTER S, DUCATI 1098S, DUCATI 1098S, DUCATI 1098R, DUCATI 1098, DUCATI 1098
Purchased by Brand name
Most of ReplaceSprocket in 1098 is 2-pieces Structure and it is difficult to have high initial cost. But if you purchase even Flange, you will only need to purchase the Sprocket Department from the next time so it is not that expensive.
I like this design and beautiful Gold more than that. Once installed, it hides in Flange and almost hides, but still the joy that he owns is Large.
For installation, it is necessary to remove Nut which is tightened with intense Torque such as Axle Nut, so I think whether it is better for those who do not have confidence to ask Shop.
View detail