Reviews
Just right!
In general maintenance
This amount should be enough.
View detail
MATSUSHIMA Glass Tube Fuse very identical to the OEM ones
previously I bought the OEM Fuse from the webike shop ,this set very identical to the OEM ones.same lenght and same diameter and well secure the package .for the price well worth every yen because couldn't find this set anywhere else for the cheap prices.I bought 3set for spare so I can keep it when I needed one.Direct fit for tw200 early modle fuse box. works great .I can highly recommended this product .WEBIKE Shop is one of the best shop for buy finest quality and rare products for cheap prices.webike shop offers great service.so anyone can buy product with confident. webike packaging is awesome.they secure the items inside the box with the bubble (doesn't matter the product size,they do it anyway ) wrap for further protection.I highly recommended.WEBIKE.. awesome people and 5star shop. .Thank You !!! View detail
Not sold at Home center.
It was not sold in Home center and was purchased on Net!
You can use it!
View detail
Go to MONKEY's Fuse
MONKEY's Fuse flew while I was fiddling with Wiring, so I bought it in a hurry.
It is a good idea to have a Spare in case you run out of Fuse or Spare in Main, so you can always add more.
View detail
Fits: HONDA Super HAWK250, HONDA Hawk II CB400T, HONDA Hawk III CB400N, HONDA Super Hawk III CB400D, HONDA Hawk CB250T, HONDA Hawk CB250N, HONDA Super Hawk III CB400D, HONDA Hawk CB250T, HONDA Hawk CB250N
BRC BRC Government Fuse OEM Type
Thank you for the quick response. View detail
It's relatively expensive.
I had been using 30mm instead of 25mm.
Now you can't substitute it.
Home center sells 30mm, but
It was a great help because it is not sold in this Size.
View detail
I can't find it for sale at Home center.
Used in RZ350
Home center only has 30mm.
I had substituted one for 30mm, but now I can put it back on.
View detail
Fits: HONDA CBR400F, HONDA CBX400F, HONDA CBR400F, HONDA CBR400F
BRC BRC Main Board Fuse (OEM Type)
It is, after all, an OEM product, and although it is reliable, it is relatively expensive compared to other Fuse products. View detail
Sober Large Cut Parts
January to February, there are many days below freezing all over Japan, especially in the Tohoku region... I had a bad feeling the other day when I tried to fire up my car... but I didn't hear a peep.
Battery? I was sure it was weak, but I opened the fuse box and found that the fan had run out of fuse.
In case the Fuse here was stocked, so after the replacement → Engine started without any problem.
The cold discharges the Battery and reduces the Battery's ability to generate power itself.
When the engine is started in such a condition, the battery is forced to work hard, causing overvoltage, and the Fuse seems to cut out. I learned that the cold affects not only the battery but also the fuse.
good point
Low cost, easy to obtain, easy to stock.
No problem with functioning as a Fuse. After replacement, it is in good condition.
This is marked as "Ampere" and is easy to read.
The shape of the Fuse remains the same, so it can be used for other applications besides Motorcycle.
A bad point
No.
For Kick start motorcycle, there is not so much concern, but with Cell motorcycle, Battery+Fuse is also an item to be checked in winter.
As the weather gets warmer, many of us will be waking up our Motorcycles from hibernation.
If the Engine does not run, suspect Fuse as well.
View detail
Rose sales are helpful.
As the Title says, Rose selling is good, and it really helped me to choose the Ampere I wanted.
Netetc. sales, I was able to buy only the Ampere I needed for my Motorcycle this time, and the Ampere I didn't need was only cheap in Large quantity.
View detail
It's working fine!
It is a product that I have a hard time evaluating soooo much, but … lol I bought it because I suddenly ran out of Fuse.
I replaced it! Naturally, it worked fine!
View detail
![Repair/Optional Parts] Mini Flying Fuse (BFMN)](https://img.webike-cdn.net/catalogue/images/77591/d_1_TS.jpg)
3 cups
[How is it used?
I bought this because I accidentally skipped the Fuse for the Accessories power supply when changing batteries.
I could have gone to a Motorcycle supply store, but I was just planning to buy another product and bought it at Webike, which had it in stock.
Was the one you received as per Image?
What do you see when you look at Single Body? Was it this small? I was worried, but there was no problem.
As you can see in the picture, 2A contained three pieces.
How was your experience with it?
Naturally, there were no problems at all.
There is no particular change, but the Accessories power supply is now working properly.
【Review】
It is safer to buy in advance before skipping Fuse and rushing out to buy.
With 2A, as shown in the photo, there are 3 pieces in the package, so you can keep the rest as a spare.
The price is also inexpensive, which is good.
View detail
6 Shop
Necessary items for 6BoltMONKEY and CUB, made in Japan for peace of mind View detail
It is cheap and very convenient. On the occasion of shopping.
It is cheap and very convenient.
On the occasion of shopping.
View detail
Convenient
It's convenient
The fuse may be too hard to pull out, or the approach may be too narrow.
This product helps me to get rid of Fuse smoothly.
Recommendation
View detail
It worked fine.
I used it on SR400.
Because, one day, Fuse suddenly flew, and the cause was not understood by the simple examination in Tester.
The situation doesn't make sense to me, as it was cut off and Large strong about 10 minutes into the run.
I've ruined about 3 Fuse without knowing it, and I can't go out without worrying about this…
Because it came to be said, the product concerned (20A) was purchased for the cause pursuit and the emergency restoration at the destination.
Of course, it worked properly, which was a big help.
After repeated experiments, the cause of the problem was that the Blinker wire was hitting the exhaust pipe of the Up type.
It was that. Because the line was brushed and hit and melted in the place where it was not seen at a glance, it was
That's why it's so hard to tell.
I've reverted to NORMALFuse now that I know what caused the Trouble, because the enclosure is slightly longer, but
I always keep it in my Wallet to use in case of emergency.
The SR is an older design, so it will be this Large type Type, but I also own a relatively new SS.
I'm thinking of buying the company's Mini type 10A as well.
Well, it's not necessary if you keep OEM wiring or modify it, but if you can handle the wiring well.
However, since it is easy to cause trouble in the motorcycle which played with the electrical system to a large width, this product is
I think it would be helpful to have one Case.
View detail
![[Repair/Option Parts] Mini Hiragata Hughes (BFMN)](https://img.webike-cdn.net/catalogue/images/77591/c_1_TS.jpg)
Low volume Fuse is hard to find in stores, so this is a great help!
Mini Flat Type Fuse.
In the shop, this transit allowable current (capacity) We rarely see any of the
Even if it is sold, it is assorted with other capacities and you will end up buying capacities that you do not need.
Although it is low capacity, I think that it is necessary to install it between the equipment and the battery when I think of the thermal runaway of the equipment to be targeted and an unexpected short.
We try to provide Fuse facilities regardless of the current consumption.
View detail
The flat type 1AFuse is Single Body, and it is thankful because it is almost not seen in the store!
Flat Type Fuse1A is a Single Body, and it is almost impossible to see it in the store, so I am very grateful for the Large change.
It is the best current capacity for the place of the small current which is too large in the capacity of Flat Type Fuse3~7.5A often seen in the store.
Quantity because it is valuable:I bought 2 sets
View detail
Flat Type Fuse7.5A is MAJOR, but be careful of vibration on Motorcycle…
Motorcycles have added vibrations that cannot be expected in a car.
If you use a cheap Flat Type Fuse, the Fuse part (core wire) may slip down and be exposed by vibration.
In this regard, I have not noticed any changes in the motorcycle accessories manufacturers.
View detail
Wiring at both ends is thick
[How is it used?
It is used as a safety protection for the 12V Wiring handling from Battery.
How was your experience with it?
The cable of both ends of the holder is thicker because the Fuse of up to 30A can be attached to this product. I think that there is no problem if it is a place where it is not seen though the feeling of discomfort comes out when I do Holder attachment etc. with a thin sq wire.
[Points to note]
Fuse is not included and you will need to purchase your own MINI flat type.
For use outside the car, we use the Wiring Cover together to increase the waterproof property.
View detail