Reviews
That would come in handy
I attached it for USB and DriveRecorder which I will eventually attach.
It is easy to install and is a very convenient unit to have.
View detail
It's easy.
It is much easier and safer than making your own power supply.
I was very fortunate to be able to connect and install Wiring on my Z900RS.
I placed the body under the Seat, but I heard that it is not Waterproof Specification, so I would like to be careful not to get water under the Seat when washing the car.
View detail
Great product.
Used for Ducati MULTISTRADA 1000DSDS.
Until now, power supply was taken in an unattractive manner, starting with a direct power supply to the backup power supply and forcibly branching out from a break switch or the like.
I have been thinking about using it the next time I get a 12V power supply since it was released a few years ago. I finally found a good Timing and decided to use it.
While recent motorcycles are equipped with an attachment power supply from the start, motorcycles made in the 2000s and earlier are often not equipped with one.
However, MULTISTRADA 1000DS is fortunate to have an Ignition-linked power supply, from which it gets power for Relay.
D-UNIT is what is called a "Badded Direct Relay," but the good thing is that it can be easily assembled without having to think about anything difficult, and this WaterRegistrant is waterproof.
One can take out 3-pole.
Depending on the vehicle, it may be necessary to obtain power for ON/OFF from a brake switch, but the D-UNIT itself is so small that it can be installed in any location.
It might be a good idea to take it from Rear brake, etc.
I would like to use it when I switch to another vehicle.
The 6-poleSpec. was also on display for reference at the Motorcycle show, and I would love to see it sold.
View detail
Mast for those who want to add electrical equipment.
DAYTONA's D-UNIT can add an electrical system to your motorcycle, helping to expand the electrical system. Once connected, multiple electrical parts can be added as an attachment power source.
D-UNIT is designed to be easy to use, so you don't have to think about the Relay mechanism:just connect the Red Stag beetle terminal to the Battery Plus, the Black Stag beetle terminal to the Battery Minus, and the Red Bullet Terminal to the Motorcycle Attachment power supply. The Red Bullet Terminal is connected to the Attachment Power Supply of the Motorcycle, and the four largest electrical parts are connected to the (up to 20A) Can be added.
This allows for the addition of electrical parts such as DriveRecorder, ETC, USB port, etc.
Furthermore, D-UNIT's Electrical Parts are reliable and safe. The solid design is likely to prevent Trouble and Short in the electrical system.
D-UNIT's electrical parts are useful items for those who want to expand the electrical system of their motorcycles. With easy connection and high reliability, they are both easy to use and safe.
View detail
I was able to do it by watching a YOUTUBE video.
I have a long history of motorcycling, but I am an amateur at tinkering. I am even more inept at tinkering with engine and electrical systems. But this time, I wanted to install a grip heater on my PS250, so I decided to take on this challenge. The problem is where to get the main power supply and ACC power supply, but I managed to connect them by using Instruction Manual and Youtube.
Wiring under the Seat is also very nice as it fits nicely. The YOUTUBE video is also very helpful. However, if you buy a Ponghang Motorcycle from the Showa era, you will be in a state of confusion because the wiring is not of the dimension of the power supply unit. I am sure that a modern Motorcycle will be easy to install.
View detail
If you want to install electrical components, this is a safe choice.
It is helpful because three power sources can be taken out with a Batch Direct, Key On.
Attachment power was taken from ServiceCoupler with DAYTONA's Easy Power Extraction Harness.
I have been using the Fog Lamp and Grip heater from this power supply and so far have not experienced any problems.
I am considering how to handle the Black Cover of the Battery since it does not close completely when the Wiring is interrupted at the Plus terminal of the Battery,
View detail
Attachment to power supply extraction
It was used to retrieve the Attachment of DAYTONA's Power Unit from the ServiceCoupler.
It is easy because it is Couplet-on.
View detail
very convenient
[How is it used?
Wiring mess cleanup
Was the one you received as per Image?
It is not the Parts that are about texture, but well, it is as per Image.
Was the installation difficult?
It is not difficult with a minimum of knowledge.
How was your experience with it?
It is not necessary to have it, but it is Refreshing to have it.
[Included Parts:were they on?
Tie Band, Wiringetc. for 2 streets, and I think we have everything we need.
[Was there anything that disappointed you?
Not particularly
View detail
Proper & Safe power distribution
This D-unit was very easy to install, tap directly from battery. This is the best and safest way to distribute power to additional accessories your bike may have. Each outlet is fused, so there's an added layer of safety. Each of the connector from outlet also has waterproof cover. Minor drawback is the terminal connecting from the battery is open, so depending on where you install it, you might risk having water passing thru (rain water, during bike wash). On my bike, i had to cover it with plastic so no short can happen. View detail
It is easy to install. Highly secure.
Once installed, the 3 circuits linked to the Attachment can be made stably. I installed it in the helmet-in part of the Scooter this time, so I didn't have to worry about waterproof, but NAKED has a series of waterproof type, so it is convenient for wiring of car navigation system, USB outlet, grip heater, etc. The price is surprisingly low, so I have high satisfaction. The weak point is that the length of the WiringCable to the battery determines where to install it. View detail
Easy to install
[How is it used?
Was the one you received as per Image?
Slightly Larger
Was the installation difficult?
Very easy.
How was your experience with it?
[Included Parts:were they on?
[Was there anything that disappointed you?
Requires Space for installation.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Required Items
Anyone can do the nifty VeteranRider technique of drawing auxiliary equipment from a stable battery power source via Relay for about $2,000. Outlet sensation. The addition of Items that use electricity can be made in the
In my case, this time,
・Grip heater
・USB power supply
・Temp meter
attached to the D-Unit.
Since the ETC originally had a stand-alone fuse mechanism, and since the ETC could be used in other vehicles, we did not modify it badly and used a branch from the ACC power supply as originally installed, without passing it through the D-UNIT.
(Fuse of ETC is 1A with normal Flat Type Fuse, but in case of low head Small Type Fuse used in D-UNIT, it is dull to find 1A standard one.)
Now everything is filled except for Wiring in the D-Unit's backplane.
In recent motorcycle, I would install an ETC system here instead of a temp meter, and as for the constant power supply, I would install a driver's recorder that can record vibration detection even when the key is turned off.
(The voltage display on the temp meter, which had the power supply outlet relocated for installation on an old car, was fluctuating by about 1V. (The voltage monitoring should be closer to the battery...)
I think there are many people who do not understand the Merit of this product, but once this D-UNIT is installed, only the + and - wires need to be considered when adding at least three electrical components.
We are also talking about being able to get them all from a stable battery power source and not having to worry about the capacity of the wiring that comes in the branch.
If this explanation still does not come with a Pin to Merit "Take this. It's good. If you do so honestly, even if you don't understand it, it's OK.
It is also easy to simplify Wiring and make Layout beautiful, so I felt that I would like to install one of each for the other three vehicles I own.
View detail
Refreshing Good for summarizing
Pre-installed with ACC linked outputs for 3 terminals, Fuse for each system, and a constant power terminal. Relay." It is
This product is easy and good to put together with Refreshing, although it can be substituted with a general 4-wire Relay.
Please be careful when purchasing the same D-UNIT as part number 98830 is a Type that does not have a constant power supply.
BodySize is almost the same, and the line extending to the battery is thicker in this product (Part No. 16075).
Texture 4 is given as -1 because this product can be attached and detached with claws, and these claws are easily broken.
(98830 has a hinged lid)
Each terminal is equipped with a fuse for safe distribution, which is recommended when installing electrical components.
View detail
simple and easy to install
I installed Daytona Power Cable USB Type-C L-shaped connector on my Ducati StreetFighter 1098S and action camera DJI, installation is very simple and takes about 30 minutes with the included power cables, the camera is woking fine. View detail
Convenient
This is useful to get Attachment power. You can easily do this by looking at the YouTube post. View detail
Excellent Product
The D-Unit is high quality and well made. It's small size allowed me to install in a very tight battery compartment to provide easy access for future power connections without having to access the battery and removing the cables to connect an accessory. This D-Unit ties into an Acess. power wire which makes power to your added accessories available only when the key is turned on. Great Product! Thank you View detail
good power supply
It is quite small than i expected and that makes easier to find the location for install power supply. I connected heated grip there and work quite well. Highly recommend product. View detail
Very useful for installing electrical components
Until now, we had branched Attachment power supply from Fuse or branched it with Electro Tap, but it was Large strange to remove it because of the mess of Wiring.
This is quite convenient because it allows multiple electrical components to be linked to the key and makes them easier to remove.
It is not Waterproof, though, so it must always be installed under the Seat, etc.
In the case of the SV650, space under the seat is limited, and since an ETC is also installed, it was mounted above the fuse box.
It may get in the way a bit when changing batteries, but that is not a problem since it will eventually be removed in that case.
I'm glad I purchased it.
View detail
For charging your phone!
I bought it to charge my phone for now. However, I think I will need another ACC power supply in the future, which will be very helpful.
Lock fastener made by Emon (so-called Magic tape) I fix it with a It is very easy.
View detail
Refreshing and charging Cable can be placed
We have recently started using a smartphone navigation system for touring, but our smartphone runs out of battery power in the evening even while replenishing it with Mobile Battery at every rest point. We installed this USB Type-C L-Connector with integrated Charging Cable.
The installation was satisfactory by adjusting the length to the minimum necessary to prevent the cord from being blown away by the wind as much as possible.
The power supply was taken out from the Battery with the Attachment Power Supply Unit D-UNIT WR made by the company, but as a result of various troubles in a place not affected by the heat of the Engine, there was only Space under the Seat, and the Unit and Fuse of the Charging Cable were in a position that could not be accessed unless the Tank and Air cleaner box were removed. As a result, the only space available was under the Seat, and the unit and Fuse of the Charging Cable were in a position that could not be accessed unless the Tank and Air cleaner box were removed.
I am not familiar with electrical systems, so I would appreciate it if you could make a connector that can be connected to the power unit with a Refreshing Easy Waterproof CouplerON if the company's products are compatible with each other.
View detail