Reviews
Fits: SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI ST250, SUZUKI katana, SUZUKI GSX-R1000
GSX-S125 2023 has differences such as Wiring allocation
[How is it used?
Installed on a DL32D GSX-S 125 2023, used to take out ACC power from a DAYTONAD-UNIT WR. (I plan on wiring the D-UNIT WR with Fog and Others additional power system)
Was the one you received as per Image?
No problem.
Was the installation difficult?
When installed on a 2023 model (DL32D), the ACC (+ wire for Attachment) and GND (Grounding Wire) of this product are reversed. In my case, I connected the ACCPower Cord of D-UNIT WR to the GND wire.
Also, in the 2022 and earlier models, a blind lid was attached to the connector on the body side of the GSX-S 125, and there was no connection beyond that point, but as shown in the photo (…) in the 2023 model, another connector was connected beyond the connector on the body side, and the wiring seemed to extend beyond that point. As you can see in the photo (…), in the 2023 MODEL, another Connector is connected to the end of the Connector on the Body side, and Wiring seems to be extended to the end of the Connector.
Therefore, we disconnected the OEM's Connector and inserted our product between them.
How was your experience with it?
The objective of getting ACC power was achieved without any problem.
[Included Parts:were they on?
users' manual
[Was there anything that disappointed you?
Not particularly
Some may consider this product to be price sensitive, but I think it is a good choice because it can be quickly returned to NORMAL when sold.
View detail
Fits: HONDA SUPER CUB 50Standard, HONDA SUPER CUB110, HONDA SUPER CUB110Standard
Easy installation for everyone
The point that anyone can easily install is good. However, when removing the body of the SUPER CUB, the part that comes in contact with the SUPER CUB is
If you cure with tape in advance, you can avoid putting wounds on the surface.
View detail
That would come in handy
I attached it for USB and DriveRecorder which I will eventually attach.
It is easy to install and is a very convenient unit to have.
View detail
Kijima ACC branch harness kit
I haven't installed it yet, but it's good because the quality of the product and the product are excellent. I'll use it well. Thank you for the meticulous packaging and sending. View detail
It's easy.
It is much easier and safer than making your own power supply.
I was very fortunate to be able to connect and install Wiring on my Z900RS.
I placed the body under the Seat, but I heard that it is not Waterproof Specification, so I would like to be careful not to get water under the Seat when washing the car.
View detail
Fits: HONDA Rebel300, HONDA CB300R, HONDA CB500X, HONDA REBEL250, HONDA REBEL250, HONDA FORZA-Z, HONDA FORZA-X, HONDA glom, HONDA glom, HONDA glom, HONDA glom, HONDA VTR, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX125
Easy power extraction
I put this on my 2023 CB1300SB and was able to connect it without removing the rear cowl. The price is reasonable and I am glad I bought it. View detail
Fits: YAMAHA YZF-R3, YAMAHA MT03, SUZUKI Zixxer 250 SF, SUZUKI Gixxer 250, SUZUKI Gixxer 150., SUZUKI GSX250R, YAMAHA SEROW250, YAMAHA YZF-R3A, YAMAHA YZF-R3A, YAMAHA YZF-R3, YAMAHA YZF-R25A, YAMAHA YZF-R25A, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA XSR900, YAMAHA XSR900, YAMAHA MT-25, YAMAHA MT-25
I would use it if I had it.
Product Name
KITACO KITACO Power Outlet Port Harness
Item Number
756-9000200
Vehicles
GSX-R125 ( 2BJ-DL33B ) 2020
Number of man-hours
5 minutes
Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect for customization and maintenance of the wiring process.
Why did you choose this product?
It is very easy to use, and it makes the wiring process easier.
Was the one you received as per Image?
It was exactly as shown in the Image. The price is right for the ease of installation. Just pull it out and insert it in between the two.
Was the installation difficult?
It is not difficult to solve. It's something that makes it easy.
How was your experience with it?
It is recommended if you are going to install an electronic device such as a DriveRecorder, etc. There are other fits besides YamahaManufacturer.
[Included Parts:were they on?
None in particular. Only a statement of explanation.
[Was there anything that disappointed you?
It would be nice if the price was lower, but it is good.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Great product.
Used for Ducati MULTISTRADA 1000DSDS.
Until now, power supply was taken in an unattractive manner, starting with a direct power supply to the backup power supply and forcibly branching out from a break switch or the like.
I have been thinking about using it the next time I get a 12V power supply since it was released a few years ago. I finally found a good Timing and decided to use it.
While recent motorcycles are equipped with an attachment power supply from the start, motorcycles made in the 2000s and earlier are often not equipped with one.
However, MULTISTRADA 1000DS is fortunate to have an Ignition-linked power supply, from which it gets power for Relay.
D-UNIT is what is called a "Badded Direct Relay," but the good thing is that it can be easily assembled without having to think about anything difficult, and this WaterRegistrant is waterproof.
One can take out 3-pole.
Depending on the vehicle, it may be necessary to obtain power for ON/OFF from a brake switch, but the D-UNIT itself is so small that it can be installed in any location.
It might be a good idea to take it from Rear brake, etc.
I would like to use it when I switch to another vehicle.
The 6-poleSpec. was also on display for reference at the Motorcycle show, and I would love to see it sold.
View detail
Mast for those who want to add electrical equipment.
DAYTONA's D-UNIT can add an electrical system to your motorcycle, helping to expand the electrical system. Once connected, multiple electrical parts can be added as an attachment power source.
D-UNIT is designed to be easy to use, so you don't have to think about the Relay mechanism:just connect the Red Stag beetle terminal to the Battery Plus, the Black Stag beetle terminal to the Battery Minus, and the Red Bullet Terminal to the Motorcycle Attachment power supply. The Red Bullet Terminal is connected to the Attachment Power Supply of the Motorcycle, and the four largest electrical parts are connected to the (up to 20A) Can be added.
This allows for the addition of electrical parts such as DriveRecorder, ETC, USB port, etc.
Furthermore, D-UNIT's Electrical Parts are reliable and safe. The solid design is likely to prevent Trouble and Short in the electrical system.
D-UNIT's electrical parts are useful items for those who want to expand the electrical system of their motorcycles. With easy connection and high reliability, they are both easy to use and safe.
View detail
Fits: SUZUKI SV650, SUZUKI SV650X, SUZUKI GSX-R1000, SUZUKI GSX-R600
Easy power supply extraction
[How is it used?
GSX-R600 (K6) I purchased the Accessories power supply to pull Accessories power from the
I thought I would make it with Bullet Terminal since I only needed to branch Harness, but it looked easy enough, so I bought it.
Was the one you received as per Image?
It was just like the picture.
How was your experience with it?
Although the applicable year was 2007, I bought it thinking it would work for 2006 as well, and it worked fine.
It is very easy as it is just a matter of interrupting the Wiring Connector that goes to the Tail lamp.
[Points to note]
Not particularly
How did it compare to other products?
Not really a product, but I was thinking of processing Harness.
It is more expensive, of course, but the price is worth it because Accessories power can be removed in a few seconds and restored immediately.
【Review】
It is easy and good for those who are not very good at Wiring processing.
It is also time-saving because all you need to do is connect the Bullet Type Terminal to the Bullet Type Terminal of the electronic device you want to interrupt and use.
View detail
Fits: YAMAHA YZF-R3, YAMAHA MT03, SUZUKI Zixxer 250 SF, SUZUKI Gixxer 250, SUZUKI Gixxer 150., SUZUKI GSX250R, YAMAHA SEROW250, YAMAHA YZF-R3A, YAMAHA YZF-R3A, YAMAHA YZF-R3, YAMAHA YZF-R25A, YAMAHA YZF-R25A, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA XSR900, YAMAHA XSR900, YAMAHA MT-25, YAMAHA MT-25
Plug and play
About quality and texture : very quality build by kitaco About the feeling of use: safe wiring Products to buy together: i bought givi sidebox with signal lamp Difficulty of installation : very easy plug n play Cost performance and comparison with other products: worth every penny About shipping and packaging: very well packaged Any concerns, cautions, or advice when purchasing: make sure.suitable for your model View detail
Fits: HONDA Rebel300, HONDA CB300R, HONDA CB500X, HONDA REBEL250, HONDA REBEL250, HONDA FORZA-Z, HONDA FORZA-X, HONDA glom, HONDA glom, HONDA glom, HONDA glom, HONDA VTR, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX125
Mounted on REBEL 1100
I couldn't find any for the Rebel 1100, but this product was said to be compatible with it, so I bought it and installed it as an ACC power source for the Fog Lamp Unit. It was a simple installation, just peel off the tape and install it between the couplers. View detail
Z900RS (2024) For power supply extraction
Used to take out USB power supply from Z900RS (2024 Yellow BallEdition).
Just stick it in the Connector under the Seat. (Coupler is wrapped around with Black Tape as you wrote.)
No problem as it stays under Seat even after sticking.
It is very easy and anyone can work with it.
View detail
Fits: HONDA CBR650R, HONDA CB650R, KAWASAKI NINJAZX-25R-SE, KAWASAKI NINJAZX-25R, KAWASAKI NINJA250R
To DAYTONA's D-UNIT.
Used to install DAYTONA's D-UNIT. I did a lot of research, but I was able to install it without any particular difficulty. View detail
Fits: HONDA CBR650R, HONDA CB650R, KAWASAKI NINJAZX-25R-SE, KAWASAKI NINJAZX-25R, KAWASAKI NINJA250R
Very handy and convenient.
I use this product on my Kawasaki Z400 (2024 model). It is very convenient. View detail
I was able to do it by watching a YOUTUBE video.
I have a long history of motorcycling, but I am an amateur at tinkering. I am even more inept at tinkering with engine and electrical systems. But this time, I wanted to install a grip heater on my PS250, so I decided to take on this challenge. The problem is where to get the main power supply and ACC power supply, but I managed to connect them by using Instruction Manual and Youtube.
Wiring under the Seat is also very nice as it fits nicely. The YOUTUBE video is also very helpful. However, if you buy a Ponghang Motorcycle from the Showa era, you will be in a state of confusion because the wiring is not of the dimension of the power supply unit. I am sure that a modern Motorcycle will be easy to install.
View detail
Fits: SUZUKI SV650, SUZUKI SV650X, SUZUKI GSX-R1000, SUZUKI GSX-R600
ideal power harness
It is essential harness because there is no additioanl power outlet prepared in SV650. Quite easy to connect but need to re-route original cable for tail lamp due to the lengh of the harness. I am going to supply 12v power to the relay with this for operate the acc. electrical parts. View detail
Fits: HONDA MONKEY125, HONDA DAX125, HONDA CRF250L, HONDA CRF250M, HONDA CT125CT110 HUNTER CUB
The easiest way to start tuning
If you're not familiar with electrical tuning, you can turn into a professional with this product. You can easily draw electricity by removing the headlights and attaching them. The downside is volume. Reattaching the headlights may require some skill. View detail
Fits: HONDA MONKEY125, HONDA DAX125, HONDA CRF250L, HONDA CRF250M, HONDA CT125CT110 HUNTER CUB
Used for DAX125
I used this product to connect USB to my DAX125. The Bullet Terminal is female for both Plus and Minus. I was thinking of taking the Chassis Earth out of the Minus, but I couldn't get the Chassis Earth around the Handlebar, so I used the terminal of this product. It is convenient to be able to get power supply without using Electro Tap. View detail
If you want to install electrical components, this is a safe choice.
It is helpful because three power sources can be taken out with a Batch Direct, Key On.
Attachment power was taken from ServiceCoupler with DAYTONA's Easy Power Extraction Harness.
I have been using the Fog Lamp and Grip heater from this power supply and so far have not experienced any problems.
I am considering how to handle the Black Cover of the Battery since it does not close completely when the Wiring is interrupted at the Plus terminal of the Battery,
View detail