Reviews
LED-compatible Relay
I was looking for something else to replace the rear LEDs, but the relays seemed to be acting up and sometimes did not blink. I was looking for something else and found this one, so I installed it.
Compatible with 2 or 3-pole, both bulbs and LEDs. Even if the front and rear are different, this one can handle it.
It is a good price for the mounting Rubber, with Connector genus.
Since it is a Round Type, the mounting position is tricky.
It would have been nice if the Elastic band had two cutouts to choose where to install it.
View detail
Relay
Brought together with Acc socket and harness as a set for my NC750xa RC90. items look good and Have not fix yet. Don't understand when need to have this relay set. Couldn't this socket fix onto the bike directly. View detail
Tailored to Blinker
I bought it to go with koso's Blinker, but it needed some wiring work. The product itself is solid. View detail
Wiring tools and parts required
I used it for CYGNUSX (1YP2).
The LEDBlinker worked fine. The point to note is to use 3 poles and to take Earth without fail.
I think it is a good product with excellent cost although the wiring needs to be processed.
View detail
It works! It's brighter now!
An '88 GSX-R400. (GK73A) Used for
I installed this product that I have been interested in for some time because it was not able to pass the light intensity measurement at the time of every inspection without raising the Idling.
Because the gap of the hole of the Frame is small, I removed the terminal of the Coupler and pulled it through with the string.
What I am concerned about is that the Coupler is still not waterproofed.
(It's a non-Waterproof model, so the terminals could have been easily removed …)
This time I used Tape as a bandage, but I plan to change the Coupler to a flag shape at a later date and install the Waterproof Cover that was installed on the original OEM Coupler.
The original purpose of the light level was improved in appearance, so I think it will pass the next car inspection in one shot.
I'm also happy with my Relay now that it's new and I have one less thing to worry about failing.
View detail
Fits: HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON TOURINGFamily
In reserve!
When there is an electrical system malfunction, it is difficult to identify what is wrong.
In the meantime, if you have a spare, you can replace it and see if it's abnormal.
It's also a fragile part, so it's a good idea to have a spare.
View detail
Blinker's high flasher prevention!
To exchange Blinker for LEDs, we purchased and exchanged for High flasher prevention.
Both price and Size are reasonable.
Even now 3 months after replacement it does not malfunction and it operates normally, so you can purchase with confidence!
View detail
Fits: HONDA TACT (TACT), HONDA TACT (TACT), HONDA TACT (TACT), HONDA TACT (TACT), HONDA TACT (TACT), HONDA TACT (TACT), HONDA TACT (TACT)
I think that it is sufficient performance.
Helmet in JOG attached to sports. The reason for replacement is occasionally because Blinker does not work on the way during Blinker operation. Because this Connector shape of Relay is different for this JOG sports, I made Adapter with Flat Terminal. Relay fixing method is Tie Wrap Fixing in Light cowl. Actually, when you activate Blinker, it begins to flicker one TEMPO 13. Other than that it is not complaining. When I check the price of OEM Parts Number, I am surprised
View detail
It is good that Harness is made.
Because Harness is made, it can be installed easily.
Also, because it is designed to be able to attach Relay near Battery, you can avoid lightning around Light. Although it is somewhat expensive, considering creating Harness is quite good.
Length is easy to change by myself.
One thing I complained about was Wiring diagram.
Also the Tube that summarizes Harness is Large rinse, Oversized.
Doing something about this neighborhood Rose shi.
View detail
Effective
With LED Headlight, Quantity : Pair (for Left and Right) Although it turned on at the same time, the voltage dropped due to the Blinker + Stop-lamp lighting during Idling, and the situation occurred when Headlight became flickering.
I tried using this Harness kit to solve this problem.
At the beginning, Wiring got a small impression, but there is Merit that it is easy to pass through that narrow Frame.
RelayBody and HeadlightConnector itself are uneasy without Waterproof processing, but under Seat or Vinyl Tape.
As a result of installation, flickering with Idling improved.
Also, Headlight will not flicker even in the harsh conditions of Grip heater + HeadlightHi + Blinker + Brake + Idling and I am very satisfied.
Because it is H4 Double 2 light Harness, it may have been easier to make two lights. (Since it only processes 1 pc Wiring)
View detail
Necessary and sufficient
When attached to GB 250 Type 4, the Relay Body and the Inner fender will contact each other.
I wonder if it will break down with vibration.
I think that the product itself is solidly made.
Case was translucent of Smoke, and the foundation of inside was transparent.
Since Wiring for the attached 3-pole has a flat terminal of L-Type, it is regrettable that a strange Tension will be applied no matter how ingenuous the connection with Relay is.
Wiring can be made a little longer, or if it is a flat terminal of type I, it can be solved, but once it is installed it will not move, so it will be durable Large as it is.
Since it is singing LED correspondence, it can correspond also to the Upgrade of the future Blinker and if it comes with RelayBody and Wiring with Connector at this price, you can say that Cost performance is high.
View detail
LightRelay is the only one
【What made you decide the purchase?】
When I added LED Bulb to Headlight, the voltage became insufficient, so if I was looking for a Double LightRelay at a low price, this Relay was Don Pissha.
【How was it actually used?】
This Part's Largest Large Point is that the Relay can be placed on the Battery side, it is troubled by Space that there is a Relay on the conventional Light side, but this is a matter of freedom to set up the Relay, and beautifully attached I can do it..
In addition, if it is about LightRelay, if you know a little electrical system you can make it cheaply by yourself, but if the price of this Relay kit is considered Reasonable considering the trouble, that is also the point.
【Was it difficult to install? (Hard parts case)】
I think that it is troublesome to pass Relay harness through the car body and fix the relay, but this is not a problem of this Parts, and there is no problem part in particular.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Deciding where to secure the Relay securely.
[Is there anything I was disappointed about?]
Although it can not be helped considering the price, I can not deny the quality of the electric wire and the cheapness of the terminal.
【Hope for Manufacturer - Please let me know if you have any improvement points]
When it gets here, it is cheaper!
【Have you compared items?】
Since there is only this Relay kit of this type, there is no comparison.
[Others] Any item
View detail