Reviews
![DC Station 2 [Cigar+USB]](https://global.webike-cdn.net/photo/impression/16/16ce0de2e332366625a88b47e7fc7fd3L.jpg)
Convenient The durability is also good
Navigation power & external ETC power for F4-BRUTALE800 Purchased
■ Design
The design is functional and can be matched to any motorcycle
Material:The USB and Cigar sockets covered with Rubber lids are also Refreshing Sounds good
However, the Cable coming out of the back of the Body is WhiteBlack's normal Harness It's like
It is a wire material that can be used on the Handlebar and stands out quite a bit I wanted it
I wrapped the Harness tape around Beauty and took care of it so that White couldn't see it It was
Functionality
Both USB and Cigar sockets are stable There is no voltage instability even if you use them at the same time
It also comes with a dustproof/waterproof cover that attaches to the USB cable side The USB Cable can be used in the rain
It is not a waterproof cover designed for use in the rain, but rather a dustproof I think it's the purpose Cover
I haven't had any problems with it and have used it many times for touring in the rain
Installation difficulty
If you have access to the battery, installation is easy It comes with a fixed Handlebar Clamp
The adhesive strength of Double-sided Tape is a little unreliable It comes off quickly depending on the adhesive surface
I don't think it's a good idea, since the adhesion area is so small to begin with
The fixed clamp of the Handlebar is adjusted to the Handlebar diameter A RubberSpacer is also included to secure it in place
The only unfortunate thing is that the screw used to secure it rusts quickly It doesn't affect the strength of the fixation
It's going to look a bit disappointing, so we changed the material to Stainless SteelMaterial I would like to
General Comment
It's easy to install and reasonably priced
Unfortunately, it's such a useful gem that fakes can be found on the market
It is easy to use outclassing, so it is recommended for all types of vehicles
View detail
Fits: Others
Province Space
I installed it on MT09
It's so familiar to me that I think it's an OEM Switch box
Space-saving Refreshing and installation is possible
Installation was also easy as it was only necessary to insert it into the Brake switch
View detail
Fits: Others
Convenient!
I just ordered and haven't received the product yet, but I'm going to use it to charge my phone and Income I chose 2 ports because I thought it was going to be a good choice
It seems to be easy to install, so I'll be able to imprint it once it's installed again
View detail
charge for mobile phone
When touring, I bought it to charge my phone. Its generous 2 ports and wire lengths make it easy to install and use. Covers reduce risk of damage and allow safe use View detail
Fits: Others
Convenient
About the Handlebar, I can charge the usb at hand, so it's very convenient to use my phone I think
Because it is so thin, there was a lot of flexibility and convenience in mounting it
Parenthesis is a good idea
View detail
Very good product
I bought it with the Smartphone Holder when I installed it
Tie Wrap makes it easy to secure it in place
It has two mouths, so you don't have to worry about it when it breaks If you close the lid, it says "Waterproof" I have been driving in the rain many times without closing the lid and there is no sign of it breaking
I am very happy with it as it is very durable and can be worn anywhere
I'm going to put the same thing on my next Motorcycle
View detail
Easy is best
abrupt (Lol) ^_^^;The 5v power supply in use died and I bought it as a power supply for my phone I've got the charging cable on, so you can just plug it in (It will be directly connected to the Battery.) And
Wiring is a big transformer box, and the position of the transformer is determined, and then the connection terminal and the USB plug are placed I pulled out each of the
I'm tired of being so visceral and I'm tired of going through Wiring (;´д) 。
View detail
Fits: Others
Slender as the name suggests
I found out about this product from the video, but it is very thin when you actually hold it in your hands The Handlebar area is not too wide, so you can install it anywhere
The cover that covers the usb part is still a part of the cover that seems to go on a trip one day is uneasy
I am not able to use the Brake switch described in the Instruction Manual I installed Fuse from the power supply of Horn and used it
It's quite wiry because it's very tightly packed, due to the influence of the massification of the motorcycle pattern I had a hard time installing the handling of (I think it's the same for other usb's...)
However, I am happy with the fact that it is well energized and available
View detail
I will buy Repeat
Repeat Buy
I bought this product because of the trustworthiness of DAYTONA
It's a so-called nomination buy
The keyhole is very small in size, and the keyhole is very small for a product like this, which tends to get in the way No hindrance
View detail
Compact and superior USB
We use Relay to get power
The good thing about this product is that it doesn't take up any space
Tightening is done by Tie Wrap, so if the terminals are properly spaced, you will be able to get the best results It can be mounted anywhere on the Handlebar
Wiring Tie Wraps, even if another Wiring is along the handlebar of course and Handlebar, and you're good to go
Its successor has a slender USB, but the Quantity:Pair (for Left and Right) Because there is quite a width in front and back and up and down the Handlebar even if it is thin, the Switch and Interference with wiring
It looks good, though
The design of this USB port is not as cheap as other products on the market Most importantly, the lid is secure, which is a relief
As long as you close it properly, you won't have to worry about Short in the event of rain
The only thing that is definitely inferior to modern USB ports is that the power supply is inferior at 2.1A Isn't it?
Most of all, though, I've never felt a shortage of power from my phone and ActionCamera feeding myself
If I had to raise it one more time, I'd say it's a structure that allows the position of the central ICUnit to be changed at will It was good
Because of the length of the code, the Unit sits right above the air-cooled Engine, and it's a bit thermal I am anxious
I've used it for a year with no problems, but ……
Overall, I think this is an excellent product that I can recommend to anyone who wants a USB for now
View detail
The USB connection port part is too large …
I tried to install it on the Z1 for my phone
Because the USB connection port part is too large, the
I couldn't install it in my preferred location on the Handlebar & hellip;
In the end, Daytona's 2.1A dedicated motorcycle power supply
USB(5V/2.1A)1 port has been replaced by part number 93039
View detail
Purchase Repeat
The previous generation had a charging problem after about 3 years of use, and I had to buy the same MODEL again
The first one is KIJIMA's USB Charger (https://www.webike.net/sd/23367011/) I was going to use it, but I saw a review that said my iPhone wouldn't charge, and I was relieved to see that it didn't charge I decided to buy the same MODEL for
USB3.0 from DockConnector to USB3.0 in accessory Cable of iPhone in comparison with the predecessor, but does not seem to change in design and performance Design and performance do not seem to change as much as the accessory Cable changed from DockConnector to USB3.0
Installation was done by connecting it to the front's always-on Accessories power supply
There is no problem with its operation, and iPhone can be charged It seems to be useful when I want to use a GoPro etc. at the same time in the future because the power supply has the maximum 3 places of Charge! It is
Unfortunately, I don't see any improvements to the Rubber that comes with it for installation
I'm not sure it's strong enough, and I don't think it's a great installation method, so I'd like to see some improvements That's where
View detail
It's a solid charge
When I bought a motorcycle, the first thing I would put on it is my smartphone Holder and USBCharger
I couldn't find the USBCharger I used to use before to see if it was discontinued, so it's similar to I went with the Charger made by DAYTONA
In the case of Z1000, it is necessary to remove all the Side cover etc. In the case of Z1000, it was Large because Access to the inside was the worst if all the Side cover etc. were not removed
I think you can put it on in a few minutes once you get used to it
I dismissed Bacchanal as a matter of course, and I was thinking of leaving it to Relay, but I put Relay in between the USB and the Fuse, because the Fuse that is over-current flowing in the USB will be blown away
I don't do a lot of electrical work, but I'm able to charge it well
View detail
It may be better if you add silicone material to the USB switch port
There are a total of 2 USB charging devices in the package, a cigarette lighter socket device. The wiring is very long, and both large and small cars are completely OK. All car panels on the side must be removed during installation. The wiring is simple and easy to install, but extra care must be taken when disassembling the panels. , I tried the charging speed while traveling. The colleagues on both sides plugged in the mobile phone and tire pressure monitor, but the input of 2.1 was not as fast as expected. It rained on the way, and I checked the waterproof function. It was still OK, but It may be better to add silicone material to the USB switch port for waterproof and sealing. The package has a total of 2 USB charging devices, a cigarette lighter socket device, the line is very long, the size of the car is completely OK, It is necessary to remove all the side plates at the side of the installation. The wiring is very simple to install, but the board must be extra careful. I tried the charging speed while traveling, and the colleagues on both sides inserted the mobile phone and the tire pressure monitor, but the input of 2.1 was not as fast as the ideal. It rained on the way, looked at the waterproof function, or OK, but it may be better to add a silicone material waterproof seal at the USB switch port. translated by Google Translator View detail
Fits: Others
Slim and nice
The installation can be taken from the Brake switch power supply and was completed without too much trouble The shape of the power supply is very slim, so it's nice to have it installed with little discomfort It can be used with cell phones and HelmetHeadset I think it's cost effective as well View detail
Fits: Others
Very good product!
If you interrupt the brake switch as it is and connect it to the brake switch
It can provide power for two USB ports
If the size of the Handlebar is correct, you can install it as it is
If the size of the bar does not fit, you can attach the mounting bracket to the mirror Large Durable
The power is good enough to use the Navigation while listening to music with a smartphone connected It charges
If you close the cover, it is Large sturdy even in the rain I also tried the car wash, but no water went into it
If you follow the instruction manual, anyone can connect it, so don't worry about it See
View detail
Fits: Others
It mounts more SMART than ever before
I'm glad it worked properly, as another product I purchased before was initially defective
All in all, it's good, but I'm deducting points for the following two
I think this is fine for the USB mouth face, but the rest of it is not the same thickness, it's thinner I think it will give you more freedom of installation In my case, I can't bring it too far out because it interferes with the Clutch and Axel Wire It was
It has the word DAYTONA written on it, but it's too obvious
View detail
Fits: Others
Satisfied
Simple and securely attached
The splashproof cover may be a little stiff and empty, but with a little bit of blending, it's not a problem
View detail
Fits: Others
In case of rain, the power cannot be removed
Useful for attaching a USB power supply to the bar handle
It is thin and can be placed between the Switch
In rainy weather, you cannot use it to take power
View detail
![DC Station 2 [Cigar+USB]](https://img.webike-cdn.net/catalogue/images/12419/ns-003_TS.jpg)
Waterproof Specification
The water proofing of the terminal connections and the rubber lids of the ports is on the careful side
I think they are using a softer rubber for better adhesion, but I'm not sure if they are using a rubber It takes quite a bit of work to take it off and put it back on I know it's inevitable, but?
View detail