Reviews
Wiring branch connections are easy and good.
The differences in Cable size and current capacity are easy to recognize depending on the color.
Note that the Cover is divided between the main line side and the branch line side.
*Because the blade directly bites into the sheath for connection, use in locations with a lot of vibration may result in disconnection or poor contact.
*Care should be taken not to reuse the area once used.
It is easier said than done, since the connection can be made with just one pliers....
View detail
Fits: KAWASAKI Ninja H2 SX SE, KAWASAKI VERSYS1000 SE, KAWASAKI Ninja[Ninja ] H2 SE, KAWASAKI Ninja[Ninja ] H2 SE+, KAWASAKI Ninja[Ninja ] H2 SX, KAWASAKI Ninja 1000, KAWASAKI Ninja 1000SX, KAWASAKI Ninja 1000, KAWASAKI VERSYS 1000 SE
One key system
[How is it used? 24-hour (e.g. observation, operation (of a machine), care (of patient))
Was the one you received as per Image? Yes
Was the installation difficult? difficult (e.g. customer, guest, child)
How was your experience with it? as expected (as opposed to expected)
[Included Parts:were they on? None
[Was there anything that disappointed you? None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
exchange
The Connector we were using was discolored and deteriorated, and was hard to detach and attach, so we replaced it.
It is sold as a Single Item, so I was able to purchase only what I needed.
View detail
Fits: KAWASAKI Ninja H2 SX SE, KAWASAKI VERSYS1000 SE, KAWASAKI Ninja[Ninja ] H2 SE, KAWASAKI Ninja[Ninja ] H2 SE+, KAWASAKI Ninja[Ninja ] H2 SX, KAWASAKI Ninja 1000, KAWASAKI Ninja 1000SX, KAWASAKI Ninja 1000, KAWASAKI VERSYS 1000 SE
I want the instruction manual.
I failed as an amateur because there was no instruction manual. I ended up having to get help, but to be honest, it was an unfriendly Parts. View detail
difficult
The thickness of the Key has to be cut down considerably to fit.
If you cut too much, the Key will bend when you turn it.
View detail
Different colors!
Functionally, there is no problem, but the color of the terminal is different between the picture shown on the website and the actual product received!
The photo shows Silver, and the received item is Gold!
I wanted to be inconspicuous and bought it because it was Silver….
View detail
The "Kill" is required.
If you use it in Minimoto's Kit, it's not a problem, but …
Wiring modification is required when using OEMParts or outside the company.
There is no Wiring diagram and even if you see it, the colors are different, so you need to have some understanding to Large strange.
View detail
It's hard for me, I'm clumsy.
Purchased to use only Male on the Led License Lamp side. Female on the body side was not necessary.
However, Male's terminal Quantity:Crimp failed on 1 pc of the 2 pc, so no more Quantities other than the one I bought at WeBig.:I had to drive 1 Set to a supply store to purchase it.
The remainder is 4 Female terminals, Male1 pc, Female side CouplerQuantity:2pc. Set, TAB coupler1pc. and will be sent to Garbage bin.
It would be helpful if you could sell the terminals only.
Or it would be helpful to add one Plus terminal each for failure.
For a clumsy person like me (laughs)
But this is expensive.
View detail
The price is cheap.
The price is cheap, so I bought it for Spare of Wiring.
The price is cheap and you can order from 1pc.
The listing photo and description are Gold, though.
I'll give it up because it's cheap, but I wanted the Gold color.
View detail
Fits: KAWASAKI Z1100 (KZ), KAWASAKI Z1100R, KAWASAKI Z1100GP, KAWASAKI Z1000 (air-cooled), KAWASAKI Z1000 (air-cooled)
It's not available for Φ48.
The insulator band of GS1200SS was deformed and sucked secondary air, so I replaced it with this one.
This product is Φ48~ and the OEMBand is Φ48, but when tightened to Φ48, it is quite elliptical! (Vertical) and I ended up sucking secondary air.
The texture is very nice, the coating seems thick, and the cosmetics are good, but not for the Band of Φ48.
View detail
It was Waterproof.
I bought this one for ManualON/OFF of auxiliary equipment because this one was Waterproof Type.
It looks a bit Large, thick, and heavier than I expected.
The appearance is good with Waterproof Specification, but I wanted something that is about half the size and weight of Large.
I wish the Wiring was a little longer so I wouldn't have to worry about the mounting position.
View detail
Durability is difficult
The iron Parts of the base rusts in about half a year of using it though the thing attached from the beginning by the Brake master exchange was used for about two years. Black color coating is done to the iron, but it peels off and becomes a mess.
Also, I don't know if it's the SwitchBody or the Wiring, but the wire broke and the Stop-lamp won't turn on. The wiring itself is thin and the weld joint with the body may be weak.
If you replace MASTER, this Switch is indispensable. Anyway, it is a Parts that needs improvement. By the way, the iron part of MASTERBody is also rusty. Please think about the material that doesn't rust too.
View detail
Buy for Electric Wiring Check
What made you decide to buy?
When you do electrical wiring, you hit it with Tester to check it, but to hit Tester, you want two hands to hold what you're measuring and three hands to hit Tester's electrodes!
If I have this Cable, I bought it because I don't have four hands, I can suck it with the Alligator Clip.
What do you want to see in the Manufacturer? [Disappointments]
I knew before I bought it that I didn't need three of them at this price, but I wanted to put a Fuse on one of them.
[Do you have any products to compare it to?
They sell the Alligator Clip at Daiso. I thought about making my own, but I found the Point, so I picked it up.
[Was the Instruction Manual easy to understand? [Included Parts:were they on?
Not as pictured.
[Others]
I'm going to buy a red one with a fuse holder and modify it, because it will protect me when I make a mistake in connecting the wires
View detail
Awww, that's too expensive.
I put the cord together with Tie Wrap and when I found out, the terminal was broken from the root, so I decided to buy Spare immediately, which was about 1,000 yen. But then I saw the price and I was surprised! It seemed ridiculous, so I bought the micro switch with the terminal for solder. Probably because it is a terminal for a weak Print board, it might have broken due to lack of strength.
Maybe this is supposed to be a countermeasure, but it's still expensive!
View detail
It can be used in the Z900 20-year MODEL.
Because the license lamp has been changed to LED from the 2020 MODEL, the Connector of the license lamp attached to the Fender Eliminator Kit that is compatible up to the 19 year model cannot be installed.
I got information that it is the same as the Connector of the license lamp of Z900RS from the wisdom of the predecessors and bought this one.
It is possible to install an external license lamp without modifying the body side Harness.
It's just a Connector, but it's a bit expensive.
View detail
Adaptable Outer Diameter
The product description says that the wire outer diameter is between 1.5 and 2.9mm
Threading Emon 1.25sq. wire (Standard:2.7mm, Largeest:2.8mm) is not possible
0.It looks like it's better to use it on wire of 75sq or less
It may be that the one I got happened to be shrinking due to long term storage, but the power line It's inconvenient that the notation Label doesn't fit over 1.25sq m
View detail
Questionable durability
Stop-lamp no longer responds
6 months of use, stored indoors with less than 2000km on the clock, no wet weather driving
The Bolt is rusty, but there is no noticeable damage to the exterior or wiring and the cause is unknown
If it breaks down at this rate before the price, it's very troublesome to replace it every time
It is very disappointing because Master Cylinder is a good one
View detail
Even Universal
The general 4MINI12V key cylinder of MONKEY, CUB, etc The mounting hole was too small to fit
It didn't work
View detail
Terrible design, terrible quality
I replaced it with GALE SPEED Master Cylinder, so I bought this one too
Master Cylinder is unquestionable, but this item is the same manufacturer's It's so bad that it's not even a product
First of all, the soldering part is too poor It was removed when I bought it
If you bend the wire even a little bit, it might come off, so you have to handle it carefully
Even though it's such a poor part, when you install it, you have to put the Bolt in the hole under the wire! (Lol)
If you don't bend the wire, the Bolt won't go in, but if you bend the wire, the solder will come off
Also, the soldered part came off by mistake during maintenance, and I tried to remove it to repair it The bracket part is rusted
I can't take it anymore (Partly because it was overtorque when I installed it...)
I was forced to remove it, but the Switch is now RoseRose
I ordered a new one, but this time the bolt holes were a little off, so I couldn't do anything about it I can't put it on (Lol)
I dealt with it by sanding the hole, but even though it costs 2,000 yen for just Switch, this The quality is impossible
This product is for people who can deal with any problems on their own Alternatively, you may want to leave it to a motorcycle shop
View detail
Fits: YAMAHA Majesty S, YAMAHA Smax, YAMAHA Majesty S, YAMAHA Smax
An amateur should not hand out
Three types of code inside the box Power side Quantity : 2 pcEarth side 1 pc power supply side Quantity : 2pc is short and short Two short lines First of all, it is hard to wired to find its Relay from Battery to Relay Easy to install Loose Screw and just tighten it together, so you can also look for Engine Starter Motor Large Easy if you know the strange position, sure to remove Battery ?? View detail