Reviews
It does not fit into the other 250 models.
I purchased this for use with Blinker relay, but it does not fit into Relay's Connector.
The shape is 250 type, but it does not stick to Male terminal because the direction of the terminal is 180° opposite to Connector.
It has no use as a Connector.
This ConnectorSingle Body can be used as a Harness, but I don't think that is what a Connector is.
View detail
Fits: HONDA XR250, HONDA CRM250R, HONDA CRM250AR, KAWASAKI KLX125, HONDA CRM80, HONDA XR230, HONDA CRF230F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA SEROW250, YAMAHA XG250 TRICKER, SUZUKI DR-Z400SM, SUZUKI DR-Z400S, KAWASAKI KSR110, KAWASAKI D-TRACKER-X, KAWASAKI D Tracker, KAWASAKI KLX250, KAWASAKI D Tracker 125, HONDA CRM50, HONDA CRF250M
Did not work well
XR250MOTARD, used for front and rear Blinker LEDs.
It did not work well.
Specifically, I have become a high flasher.
Honda's Front blinker seems to be a bit special as it also serves as a position.
View detail
Fits: KAWASAKI Z750FX-1, KAWASAKI Z1000 MK2, KAWASAKI Z750 D1, KAWASAKI Z1R, KAWASAKI KZ1000 A2, KAWASAKI KZ1000 A1, KAWASAKI Z750 A5, KAWASAKI Z750 A4, KAWASAKI KZ900, KAWASAKI Z1, KAWASAKI Z2
This is the price?
The oil pressure switch and the Neutral switch were on the wrong wires, the GlassTube was also Oversized and I replaced it with the GlassTube I had on hand. There will be no next time. View detail
The construction is a bit ….
As others have said, the base of the wiring screw interferes with the installation screw, so you have to avoid it or it will come off. 。 I was able to wriggle out with a single shot. View detail
It's got hair in it, and the claws are straight Type.
There was a hair in the inner bag. It's not food or anything, so I don't mind, but it's a little weird.
The claws of the crimping part (Large type) were straight.
I was expecting Emon to have claws that were rounded inward and easy to crimp. I would have preferred to buy a Rose at the local hardware store.
It's free at the Point, though.
View detail
Fits: HONDA CB1100 F (SC11), HONDA CB1100 R (SC05), HONDA CB1100 R (SC08), HONDA CB750 F (RC04), HONDA CB900 F (SC01), HONDA CB900 F (SC09)
you get what you pay for
I wanted to install KIJIMA's LED Blinker by modifying the OEM harness, but the size was too small to connect to the common round terminal Bullet Terminal.
It was installed with Emon round terminal Bullet Terminal.
View detail
I bought it because KIJIMA.
The paint on the button is rough and has a clicky, squishy feel to it. Also, I don't think it is waterproof. View detail
Expensive when considered as Tie Wrap
I think the quality is better than Tie Wrap from 100s or Home center.
Because it is thin and rigid, it can sometimes be installed without disassembling the vehicle body, even in areas where Clearance is severe.
However, since it is just a Tie Wrap after all, it seems expensive when considered as a consumable item. If it is a removable RepeatThailand type, I think the price and quality are satisfactory, but I can't honestly say that I would recommend purchasing it.
We would rather replace low quality but inexpensive items at every heavy maintenance for long-term peace of mind.
To put it simply, it is expensive for a tie wrap.
View detail
![[MONKEY 50th Anniversary Model] Blank Key (NO. 2))](https://global.webike-cdn.net/uiu/impression/202208/22_1021933_630367a029141.jpg)
HONDA MONKEY KEYS
HELLO I have recived my keys order but the keys are not European standard . or if it com out of the photos it is not very clear and I can not choose the model of my HONDA MONKEY motorcycle . thank you . View detail
Better than the 100s.
In the extreme, it is nothing more than a simple Tie Wrap.
It can also be purchased at 100-unit stores, but the quality is only better than that.
Specifically, I thought the Merit was that it was thinner, somewhat stronger, slightly stiffer, and had a hold feeling because it was slightly harder, and black in color.
However, Tie Wrap is also just a consumable item, so there are naturally those who feel that a 100-yen item is sufficient for their needs.
I myself use the 100-unit ones except in hard-to-access places such as under the fuel tank or when replacing a tube tire.
If you are willing to adjust your purchase gold amount for free shipping or if you have confidence in Brand, you may want to consider this product, but if you consider it as a Tie Wrap, it is expensive and I personally would not recommend it.
View detail
Fits: HONDA XR250, HONDA CRM250R, HONDA CRM250AR, KAWASAKI KLX125, HONDA CRM80, HONDA XR230, HONDA CRF230F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA SEROW250, YAMAHA XG250 TRICKER, SUZUKI DR-Z400SM, SUZUKI DR-Z400S, KAWASAKI KSR110, KAWASAKI D-TRACKER-X, KAWASAKI D Tracker, KAWASAKI KLX250, KAWASAKI D Tracker 125, HONDA CRM50, HONDA CRF250M
Neither blink nor lighting is carried out. It was the same although it did by other motorcycle. If it returns to the relay of normal, it will operate correctly. They are inferior goods!
Neither blink nor lighting is carried out.
It was the same although it did by other motorcycle.
If it returns to the relay of normal, it will operate correctly.
They are inferior goods!
View detail
even with all this
I bought them together for my GALE SPEED Radial pump master, but after the order was placed, only the master was cancelled due to an undetermined delivery date, even though it was available for purchase on the product screen.
What should we do if they sell so much without MASTERBody?
View detail
Coupler reassembly
I bought this for reassembling Caphler, but it is too useless!
Anyway, it bends.
Bends even when neatly inserted.
In the end, the tools I made myself were the most useful.
View detail
Improvement desired
I bought the same Switch Wiring I had been using because it had come off the base.
Easy to install, yet does not fit well...
Looking closely, one of the two screw holes was gapped by 3mm.
I had no choice but to widen the hole with a File and finally install it.
However, this time, the wiring came off from the soldered part, and I had to re-solder it.
I had to use it for half a day just to replace the Brake switch.
The Master Cylinder is good enough, but I think the Switch that comes with it is very poor.
Since I went through the trouble of buying it, I installed it, but I'm not sure how long it will last.
View detail
MOTO LED for Fog LampSwitch HarnessKit
The configuration of the product is large and good, but the crimp on the wiring terminal of the Relay and Fuse part is not good enough, and it came off during the wiring. I would like you to use a solder or something to prevent the wiring from coming loose. View detail
Fits: HONDA NSR250R, HONDA NSR250R, HONDA NSR250R
I don't know why, but it's too far around the HI side than HI.
I checked the operation with MC28.
It will turn too far to the HI side than the HI position.
In the case of the MC28, I removed the Axel opening SensorCoupler and inserted the Card, which moves it to the HI side, so that's how I adjusted it.
If you see Manufacturer, please give us a possible reason.
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
I can't pinch the Coupler.
I bought this with the HybridHarness kit.
You can use the HarnessCoupler in the HybridHarness kit.
I'm going to insert it into this bracket.
Coupler or not pinched in the infeed groove…
I can't return it because I opened it…
In the end, the plastic part of the Coupler was scraped off with a Stick File and
I was able to insert it into the slot of this Bracket.
It was a waste of work and time….
If this was the case, I would have reused OEMBracket…
View detail
Fits: SUZUKI GSX1000S, SUZUKI GSX1100S, SUZUKI GSX750S1, SUZUKI GSX750S2, SUZUKI GSX750SS
Meter harness
The instruction manual says it's too loose. It's too loose. View detail
Different colors.
I bought it because it looked like Gold in the picture, but it was actually Silver.
The Bullet Terminal of Goods that I bought at the same time had the same color tone and was described as Gold, so I thought this one was also Gold, but it was exactly Silver. It is very confusing and I would like to have it replaced with a Gold one if possible.
Also, if there is going to be a mistake about the color, I would like it to be clearly stated in the product description.
I was going to work on it today, but now I can't.
I will give it the lowest rating.
View detail
be of a different diameter
Silver arrived, but because the diameter is Large than the GoldPlating article, when the GoldPlatingBullet Terminal of Male side is inserted, it is loose.
"*There may be changes to the product specifications due to manufacturer reasons. Is this what the warning is about?
Or was the diameter of the Bullet Type Terminal different for the Manufacturer from other Manufacturers before this?
View detail