Reviews
Almost OEM
In SR's case, the OEM's mall is halfway between
Only length is available. Sober Parts
However, it is necessary to properly use the Seat.
Since it is possible to cover up to
It is surprisingly Recommendation. Installation is
Rubber hammer as it can be slightly stiff.
without having to remove the Tank if the
It can be installed cleanly to some extent.
SR is 2m with a little extra.
Both Sides has a slightly exposed portion of the genus Gold.
before installation as it may cause rust.
You can cut off a little bit of both ends.
View detail
Fits: KAWASAKI Universal, KAWASAKI Universal
Quantity:1 Set for 1 Vehicle
Used on W650, sticks in Female side OEM with no problem. Even if it fails, it can still be used with Quantity:2pc. It is safe to say that there is a surplus of Set w View detail
It's solid.
It is sturdy and tightly attached, providing ample protection.
Tanks can be removed without worry.
View detail
Dress-up
It can be attached to the Edge of the Fuel Tank to create a Classical atmosphere.
It is a good product for preventing scratches on the tank when attaching and detaching the tank.
View detail
For Blinker repair.
I used it on a non-posh product, so I had to modify it, but it worked fine. View detail
Looks like a Large thing.
Style maintenance OK with Repair Parts. View detail
The Position is on.
I added the position function when I replaced it with the Blinker of the traditional small type. With a little modification, it can be easily seen from other cars. View detail
Retro with ease
It's hard to install the Curve because the molding is hard, but it's very effective for motorcycle di-tail up. View detail
It's also practical.
It is also useful for attaching and detaching the Fuel Tank from the Edge of the Fuel Tank, because the space between the Tank and the Frame is limited to prevent damage to the Tank and the Frame. View detail
Not only fashionable, but also practical products
"It's a mall that attaches to the Rim of the Tank, and I think it's handy for people who take the Tank off and on a lot. It won't scratch if you roll it on the ground.
You don't have to use glue or anything like that to make it Gap-free, but it's so biting that the paint might come off when you remove it.
That's my only concern. "
View detail
Don't you like Kawasaki?
Are both Webike and Bosch AntiKawasaki?
When I contacted them, they replied that there were no compatible Ninja 250 18's ….
I got it and tried it, ready to be a man-pole, and I was able to install it with no problems. Aren't you going to sell the product you've been working on?
View detail
Mount it on MONKEY!
Replaced with WSocket from Single socket. BlinkerBodyManufacturerUnknown, but this is a little bit around the perimeter of the Socket. It was cut and installed. Since the attached Grounding Wire was unnecessary, it was cut. View detail
Fits: KAWASAKI Universal, KAWASAKI Universal
I am satisfied.
I bought these to install an external blinker Initially, Male?FemaleQuantity:I bought the Set one, but it broke off when I crimped it and I bought an additional one, just for the Malle I should have chosen this one from the beginning because it was good It's good because it's difficult View detail
What a good oil tank.
Good rubber edge. For protection of paint and marks on the oil tank while repairing or traveling. Including the beauty of your motor shark. Easy to install. Self in just 20 minutes. Good water and dust protection. Easy to order. Including fast delivery from the warehouse. View detail
This work perfectly with POSH Signal
I do not see any people write a real review for this product so yeah, this one is good as they have to . Strong wire and fit withTurn signal housing. Remember to consider single or double. This text for my country people: Single là 2 dây cho bóng 1 tim , Double là 3 dây cho bóng đèn 2 tim. View detail
Perfect for W800 tank
Perfect for any W800, W650, W400. The package also uses W bike as a model so when I saw that it gives me assurance. For the W tank, you will need to buy 2 meters. I was worried about washing and rain that the water might be trapped inside but after installation, I feel relieved. The liner is although very soft and flexible, is not possible to install by hands. I hurt my hands and fingers trying to push it only that it will come out. My gut knowledge told me I need to use a rubber hammer and BAM! It fits so snugly that water should be able to penetrate. It's so tight fit you won't worry it will come out. Highly recommend for all retro bikes. View detail
I think that it is a good product.
When installing, I needed a plastic hammer to insert it all the way back.
Once installed, it is safe because it is hard to get out of Tank.
It can be mounted on the surface also on Smooth.
View detail
Thick, heavy, high quality
This is better than the cheap ones offered by generic chinese sellers. The color is deep black and looks better in real life in the pictures on webike suggest which look kinda grayish. The price is even cheaper than the OEM moles. One of the best finds on webike. I recommended many friends to get this rim to protect their tanks. View detail
I will have a tight fit
I have to hit a little bit, but I will have it tightly accordingly.
Because it is easy to bend, it does not float frantically, it comes with Exactly Firmly.
If you remove it will peel off the paint.
View detail
Good batch
Used for Tank exchange of W650. Old car feeling is perfect. Since it is necessary not to stagger or remove Tank when exchanging Plug, it also helps to prevent Wound.
Installation was tapped lightly with 100 hrs of Rubber hammer. It was hard to push it with your fingers. The part of Tank's Neck may be difficult to install with Tank attached to the car body.
I bought 2 Meter, it is about Tank 1 lap.
View detail