Reviews
It is a diversion to Clutch switch.
I was looking for a waterproof push switch for the clutch switch when installing the ZETA Flight perch (clutch) on the grom.
I cut M6Tap on ClutchBody, and since the Pitch here is foreign and probably 3/4, I re-cut it with M6Dice and installed it.
The tip, SnapSnap, has a stable click feel.
We have not ridden in the rain, so we have not been able to demonstrate Waterproof.
There are not many options for Waterproof Push Switch, but at this price, with this texture and Waterproof type, I think it is a good buy.
Personally, I thought it would be more diverting if the overall length were shorter....
View detail
It was not very practical.
[How is it used?
I wanted to use it to consolidate and redo Wiring, which is why I decided to purchase it.
How was your experience with it?
It was not very practical, as it lacked elongation and did not fit very well through Wiring.
Wiring is also limited to about two wires, and only HornWiring can be used.
How did it compare to other products?
I think Heat Shrink Tube was better.
[Points to note]
I thought the thicker Harness tube was better because it was more universal.
View detail
Refreshing
CROSS CUBShiftIndicator used for Wiring compilation
This is a Full Covered section, but I am pleased with myself for being able to summarize the Refreshing.
I think Large is also active in Wiring protection.
View detail
quality
The quality of the Wiring and the installation of the Crimp are fine.
It's a Large change help that it's sold at this Gold amount.
Additional modifications are required depending on the User, but I purchased this product with the understanding that I would be able to install it without any difficulty.
If you're a pain in the ass, buy Kit!
View detail
Stable Emon
This is Emon with an itch. View detail
Resistant to rust
Steel, not Material:The Stainless Steel hose band is rust-resistant and safe.
The quality is good and can be tightened securely.
Easy to use, easy to tighten and loosen, also GOOD.
It is convenient to accommodate changes in the thickness of the hose.
View detail
Necessities
This Tie Wrap is just the right thickness to hold Wiring together.
It is durable and of good quality, making it resistant to deterioration over time.
They are useful in a variety of situations.
View detail
It's refreshing
Effective for organizing wiring, Large is good because it looks Refreshing.
No tools are required, so it is easy to use, and it will guard and protect the wiring in places where there is heat.
It is useful for installation of electrical components.
View detail
Convenient
If not, we can use a substitute.
I bought it to try it out.
It is easy to use because it is a dedicated product, and it is easier to work with if you have it.
I think the price is too high in terms of cost performance.
Other than that, the product is satisfactory.
View detail
stoppage
It's just an ordinary Colgate Tube.
It's easy to buy, so it's helpful.
Quality is fine for normal use.
View detail
Fits: Others SEA BASS (4-wheeled) WagonR,WagonR Stingray H13.11-H15.09|H15.09-H17.09|H17.09-H17.09-H20.09|H20.09-H24.09|H24.09-H29.02|H29.02-, Others SEA BASS(4-wheeled) WagonR Solio H14.06-H16.04, Others SEA BASS (four-wheeled vehicle) Lapin H27.06-, Others SEA BASS (four-wheel drive) H20.11-H27.06, Others SEA BASS (four wheels) Lapin(AltoLapin),Lapin Chocolat(AltoLapin Chocolat) H14.01-H20.11, Others SEA BASS (four wheels) Palette, PaletteSW H20.01-H25.02, Others SEA BASS (four-wheeled) Baleno H28.03-, Others SEA BASS (four-wheeled) HUSTLER H25.12-, Others SEA BASS (four-wheeled vehicle) TWIN H15.01-H17.08, Others SEA BASS (four-wheeled) Cellbo H18.11-H21.12, Others SEA BASS(4-wheeled) Spacia CustomZ H28.12-, Others SEA BASS (four-wheel drive) H28.12-, Others SEA BASS(4-wheel drive) Spacia Custom H25.07-H28.12, Others SEA BASS(4-wheeled) Swift, Swift Sports H14.01-H17.05|H17.05-H22.09|H22.09 -H28.12, Others SEA BASS(4-wheeled) Spacia H25.03-H28.12|H28.12-, Others SEA BASS (four-wheeled) Splashing H20.10-H26.08, Others SEA BASS (four-wheeled vehicle) Swift H28.12 -, Others SEA BASS(4-wheeled) Jimny Sierra H14.01-H16.10|H16.10-, Others SEA BASS (four wheels) Jimny H16.10-, Others SEA BASS (four-wheel drive) Jimny H14.01-H16.10
For car steering.
Couplet-on to OEM's Harness.
The Instruction Manual is also easy to understand, so you will not get lost in the process.
If the earth is modified with a Bullet Terminal or the like, the installation will be SMART.
The product itself is very good, no flaws whatsoever.
Recommended
View detail
Convenient
I can do it myself, but I can process it.
It was a hassle, so I bought it.
It is well made and can be used as is.
I keep some on hand and use them when I am short on time.
Those who have trouble processing Wiring on their own will find it useful.
View detail
no inconvenience
K-CON, which I will use as well as Emon. when I buy, I am thinking about which one is in stock, but let's thank everyone involved in the Motorcycle industry for doing a good job of selling these products in Small portions. View detail
Is it kinder to have the Crimp way written down?
Unlike other ordinary couplers, TAB, receptacle is Quantity:Is it because there are not many scenes to replace TAB and receptacle with WaterproofCoupler at the same time?
I had no problems, but first-time users of this type of WaterproofCoupler may not realize that the Waterproof Plug is also crimped at the same time as the Crimp Timing on the terminals.
View detail
make no mistake
It is fine to use it in areas where it is absolutely necessary, but it is not allowed to fail because spare terminals are not included.
It would be very awkward if you accidentally forget to do it, especially since you have to Crimp the Rubber for Waterproof together.
View detail
To be used for KSR80
I bought this Switch to add Hazard functionality to my KSR80.
It is not yet installed as there are many issues to be addressed.
Switch, but Material:The quality of the plastic product is not good, but I think the quality is good enough for this price.
There is no Instruction Manual (I am convinced that the absence of one is indicated in the sales comments), so it is tough if you lack electrical knowledge.
I need to drill a hole in Panel, but I don't know how much hole to machine.
Even if you use Bracket, there are no instructions for board thickness, so Switch may rattle if you have a thin panel.
For people who are not afraid to make a billion mistakes. 。 For those who have difficulty, it would be better to purchase a similar product from a well-known manufacturer.
View detail
Replacement and machining of aged Coupler
We decided to replace the 3-pole coupler on the Speedometer side, which had deteriorated significantly over time. In addition, I decided to take out the necessary wiring directly from the coupler to cancel the intermediate harness of the Shift positionIndicator, which was in the way. Since I had just replaced the 6V MONKEY/GORILLA Main Harness the year before last, the Coupler on the body side was in good condition, so all I needed this time was Female. Quantity:I was going to buy the Set stuff, but I found a product that was just the part I needed.
For the replacement work, the wiring of the old Coupler is cut off at the root, and when the terminals are newly installed, the wiring cut off from the middle harness is added to each terminal, and the quantity is changed from one terminal to the other.:I finished by plugging the terminals into the new Coupler so that the 2pc's Wiring comes out. Now I can connect the Shift positionIndicator directly without interrupting the intermediate Harness, and the Wiring of the Front is a bit Refreshing.
The body texture is not bad, so it can be used normally without any problem.
View detail
I bought as many as I needed.
We decided to replace the 9-pole coupler on the Speedometer side, which had deteriorated significantly over time. Since the coupler on the body side was in good condition, only the female coupler was needed this time. Quantity:I thought about buying a Set item, but I found a product for only the part I needed, so I bought this one. I cut off the wiring of the old coupler at the base, installed the terminals I bought at the same time, and inserted the terminals into the new coupler one by one while checking the color of the remaining wires on the old coupler. The texture of the body is not bad, so unless there is an Accident in the future, it will not have to be replaced until the car is scrapped. View detail
It's solid.
We decided to replace the 3-pole and 9-pole coupler on the Speedometer side, which had deteriorated significantly over time. Since I did not touch the body side, I purchased only the female coupler without the terminals, so I also purchased these terminals. All you need is 1Quantity:2pc. I had only a set, but I thought I didn't need a lot of it, since the price was so high for a small number of items, but it was a good value for money.:I chose this one with 1 Set of 100pcs.
As for the product, although some of the bends were not so good, it was firm with appropriate thickness, and it fit into the coupler tightly.
There are still quite a few of them left, but the 110 coupler is used in various places, and there may be times when you want to modify it, so if you have it, it will come in handy sooner or later.
View detail
Back, I have a theory that it will be unavailable.
I used to be quite fond of the Black GlassTube for protecting the Wiring section, but I had wondered why Black was being discontinued in many Cases recently.
Apparently it's part of the global regulation of rohs? The Black GlassTube is apparently out of stock.
I'm not sure how beautiful it would be to have a BlackFrame with White GlassTube protection.
View detail