Reviews
I used it for VRD.
[How is it used?
I purchased this along with the VRD.
You can't use this without it, can you? Necessities
I don't need another Race car.
Was the one you received as per Image?
It's just as I imagined.
It is packaged in a small but solid box.
That's what GALE SPEED is all about. Even the cheapest items are well packaged and quality is important to me.
Was the installation difficult?
Bolt1 pc so it was not particularly difficult.
Wiring requires a little ingenuity, but it can be done if you have the time.
How was your experience with it?
As you can imagine, it responds normally.
[Included Parts:were they on?
The instruction manual is attached, but it is easy to understand even if you do not read it.
[Was there anything that disappointed you?
Nothing in particular.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I have to buy it because it is a necessary item. The price is reasonable, so I think it's okay.
View detail
Pricey but convenient for beginners
I think it is very convenient for amateurs to connect Motorcycle wires such as Blinker or Tail lamp. First, strip the cord, twist the wire that appears, insert it into the hole in the plastic part of this Connector, and snap it with pliers or something, and you have One Side. Do the same for the other side. The finished products are made of Male and Female, so you can connect them properly by plugging them into each other. It is an excellent product. However, if it is difficult to connect the wires, it is of course useful, but if you have a spacious place and have some room in length, I think it is best to put a solder on it.
The price is high and the cosmetics are not so good. But I think it's useful if you're in a hurry, a very beginner, or in a small space.
View detail
A truly versatile product
I also use it to put together PC wiring. It is sold by piece, which I think is quite rare, so it is a recommendation for those who want a few! View detail
Frosted Material with high texture
I used this product to wiring up my Ninja250SL's sub-computer and USB. Honestly, you can use Curing Tape instead of this product, but this product is pre-cut, so it is easy to work with, and it looks overwhelmingly good, so it is a Recommendation! View detail
For handling bare Wiring.
[How is it used?
The 27 year old Serow 225we rear blinker that I use for mountain play has developed exterior damage and poor contact, and I have decided to replace it. Wind for SEROW I purchased a new Blinker that is a crackpot Blinker.
It is common for cheap external blinkers and tail lamps, but there are many products that do not have the wiring integrated (it can't be helped that the wiring terminals are supposed to be processed...). I purchased this product because I wanted to do an OEM-like treatment.
How was your experience with it?
This product is used by cutting the end of the wiring wire through this product to match the length of the wiring wire, but it looks as good as an OEM product.
If we had treated the wiring as bare, we would have been concerned about durability and weather resistance, but this product is convenient in that respect and may have played a role in preventing unexpected trouble with electrical components.
It is also 2m long, so depending on the vehicle, it may be a good value product since it can cover 2 to 3 Wiring.
How did it compare to other products?
I have never used other companies' products of this type, so I can't compare them, but I guess there is not much difference in Large.
It has been in use for about two years, and so far no surface hardening or other deterioration has been observed, probably because it is not constantly exposed to ultraviolet light because it runs inside the exterior.
[Points to note]
There are several different sizes in the lineup, depending on the thickness and number of wires you want to cover. So, please check carefully before you buy.
This is not a type of harness tube that shrinks when heated, so please check it carefully before purchasing.
Other items that would be helpful
The deciding factor in the purchase
[How is it used? This is a duplicate of what I filled out in the column, but when I searched Webike for an OEM-style Wiring process, it was a product that was eligible for Timing Good Sale.
【Included Parts:presence or absence】.
This product is only 2m long and is a very simple package.
[ITEMS TO BUY TOGETHER
Harness tape to stop the border between this product and the wiring, coupler or Bullet Type Terminal to connect the wiring of other brand products to the OEM product, and various types of wiring for when the wiring of the external electrical components is too short, WiringCaulking Tooletc. to install them, you will be able to work smoothly until installation.
Opinions and requests to Manufacturer.
I know this is not a product that will always sell well, but there will always be people who need it, so please keep selling it as long as you can.
View detail
Fits: YAMAHA Majesty S, YAMAHA SMAX 155, YAMAHA SMAX 155
I was skeptical.
Cells seemed to turn a little heavy during ColdStart.
After replacing the battery, the cell started spinning fine after installing this product.
View detail
Fits: BMW F800 ST K71, BMW F800 ST, BMW F850 GS K81, BMW HP2 Sport K29, BMW HP4 K42, BMW K1200 GT K44, BMW K1200 GT, BMW K1200 R K43, BMW K1200 R Sport K43, BMW K1200 R SPORT, BMW K1200 R, BMW K1200 S K40, BMW K1200 S, BMW K1300 GT K44, BMW K1300 GT, BMW K1300 R K43, BMW K1300 R, BMW K1300 S K40, BMW K1300 S, BMW K1600 GT K48
Cylinder replacement for C400GT Top case 77439829379
I bought a Top case from another Motorcycle to use on my C400GT so that I could match the pin of the Cylinder to the new key.
I ended up doing it and it was surprisingly easy.
1. Remove the two inner ScrewScrews.
2、It is difficult to work with, so I use a stick? Hinge (where the turn is made) Poke and pull out the iron Pin of the
3, Remove two ScrewScrews from the inside of the removed assembly.
Be careful not to remove the lid too roughly at this time, or you may be surprised when the Spring inside pops out.
4. Then, the entire Cylinder gasket comes off, so it is large and sturdy.
5, How to pull out the Cylinder and how to match it with the new key is the same as Pannier such as R1250GS, so you can find it by searching.
6、When you assemble it at the end, you need to be careful or the lock may not close. You need to make sure that the plastic clasps are properly aligned. (I can't explain it well, but you'll understand if you try.)
View detail
My savior who mistakenly cut off CUB's Wiring
I bought it because I had mistakenly shibered CUB's RegulatorWiring.
The shape is exactly the same as the Coupler of the C50OEMRegulator.
However, please note that the OEM is like a double cord, so the attached terminals cannot be used.
View detail
Fits: YAMAHA YZF-R3, YAMAHA MT03, YAMAHA MAXAM, YAMAHA Bolt CSpecifications, YAMAHA Bolt CSpecifications, YAMAHA Bolt, YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA XG250 TRICKER, YAMAHA DRAGSTAR250, YAMAHA SEROW250, YAMAHA DRAGSTAR250, YAMAHA GRAND MAJESTY400, YAMAHA GRAND MAJESTY400, YAMAHA GRAND MAJESTY400
Good product that can take 3 power supply outlets
I bought it to get power for Tachometer and ETC. The unneeded harnesses are mercilessly cut off and used as materials for other electrical work. The harnesses are too long and are in the way, and they become harness resistors and waste energy. The output side harness is also long, but do not cut that one off. The harness is connected to the battery and ACC power source, and is energized when the key is turned on, so there is no need to worry about the battery going up. The included instruction manual is very carefully written, so please read it carefully before you start work. View detail
for RepairWiring
Great cosmetics I wanted a Wiring like this and it was just what I needed. View detail
Fits: SUZUKI GSX750, SUZUKI GSX750, SUZUKI GSX1000S, SUZUKI GSX1100, SUZUKI GSX1100, SUZUKI GSX1100
I had it installed at the store.
I had it installed at the store. View detail
Fits: SUZUKI gsx1100s katana [katana]., SUZUKI GSX750S KATANA [Katana]., SUZUKI gsx1000s katana (all years), SUZUKI gsx1000s katana (all years)
Starter RelayHarness handling
Depending on the year and the Type of Starter Relay, the Harness handling may need to be changed.
In my case, I solved the problem by handling it as shown in the photo.
The Right Side Cap was purchased and installed separately.
I think it would have been perfect if there was a hole for the harness to go through like OEM Product.
View detail
It is small in size. Can be installed with many types of devices. View detail
Finally, it's time to go.
I purchased and installed a Push Type Switch to use as a switch for the power supply of the car navigation system, but the other day, when driving on a mountain pass with somewhat rough pavement, a malfunction occurred due to vibration, causing the power supply to turn off and on, and temporarily Navigation repeatedly started up and stopped functioning.
This symptom did not occur during normal city driving or on well-paved roads, even on mountain passes, so I think that the problem may have been caused by severe vibrations that exceeded the manufacturer's expectations. I think that the previous Push Type Switch may not be good at strong vibrations. I don't want to continue to use the switch in this situation and have navigation problems, so I decided to replace it with a toggle switch that I have and see how it goes.
I bought this toggle switch but never had a chance to use it, so it has been sitting in my inventory for a long time. I haven't tried it in a place where it would vibrate yet, so I don't know how it would work in a similar situation, but I like the way it looks, so I'm glad it works.
It is not waterproof, but since we basically don't ride in the rain and it is installed in a Cowl, it is probably Large sturdy. I have applied waterproof treatment to the terminal part.
View detail
Smooth transaction
Packaging is secure and item have been received well.The seller is good and respond with my inquiries when I want to change my email. Part definitely original one. Will purchase another item next time. Thank you ! View detail
Fits: HONDA PCX160, HONDA PCX125, HONDA GB350, HONDA DIO110, HONDA GB350S, HONDA LEAD125, HONDA FORZA250, HONDA CT125CT110 HUNTER CUB, HONDA SUPER CUBC125
STAND Can Sera
When you buy a new car, it is one of the items you must have. View detail
Motorcycle Wiring Essentials
This is a must-have item when placing a Relay on the Seat and extending the wiring from under the tank, through the Engine sturdy, to the Handlebar on the Front. It protects the wiring from rain and heat and prevents unnecessary troubles. View detail
Fits: HONDA PCX160, HONDA PCX125, HONDA GB350, HONDA DIO110, HONDA GB350S, HONDA LEAD125, HONDA FORZA250, HONDA CT125CT110 HUNTER CUB, HONDA SUPER CUBC125
STANDCancellation
Easy to install and a must-have part View detail
It was easy to use.
I purchased this product to use as a power switch for my car navigation system, and although it is not waterproof, it has performed its function with no problems caused by a little rain.
However, during a recent touring trip on a mountain pass with somewhat rough pavement, a malfunction occurred that appeared to be caused by vibration, resulting in a situation where the power was turned off and on, and Navigation temporarily stopped functioning after repeated startups.
Since this symptom did not occur during normal city driving or on roads with good pavement, even on mountain passes, we believe that this event was caused by severe vibration due to rough pavement. We believe that the problem is not a defect in this product, but rather that this type of switch is not good with severe vibrations, and that the cause of the problem this time was severe vibrations that exceeded the manufacturer's expectations.
I am thinking of replacing the navigation switch with a toggle switch that is in stock and see how it goes. I am thinking of replacing the Navigation switch with a Toggle switch that is in stock and see how it goes.
It's a shame because it felt good to use, but I think I will keep this Switch until I can find somewhere where I can use it.
View detail
It's safe to use
We have just purchased Male and Female at the same time, as the stock of Bullet Terminal was running low, in order to review the Wiring of the Motorcycle's retrofit electrical components.
I try to stockpile these frequently-used materials in large quantities because I don't like to be interrupted when I run out of materials during a job.
Some of the No Brand products were shoddy, but I can buy Emon products with confidence. There were no defective products this time either.
View detail