Reviews
Fits: HONDA CT125CT110 HUNTER CUB, HONDA MONKEY125, Others Universal
Works as expected on a JB03 Monkey 125
Installed Kellerman Atto indicators front and rear with stock relay and had hyperflash. I ordered this Kitaco LED flasher relay for my JB03 Monkey125 and it fits/works great. No more hyperflash. The relay is located under the fuel tank, the easiest way to get to it is on the right side. Lift the tank up 2 inches for easy access. View detail
It comes on easily.
I put it on a SUPER CUBC125JA58.
The Left Side Body cover must be removed.
Remove the Coupler coming from the Stand switch and short-circuit it with this product.
Female coupler from Stand switch covered with Vinyl Tape.
EngineOn, with the GEAR in 1st gear, Side Stand up and away from the C125 will not cause the Engine to stop.
It is Recommendation (^^)
View detail
Used for Koken:Mechanical Clutch Holder
What made you decide to buy?
Roller Type Micro Switch used in Koken's Mechanical Clutch Holder to fit 6ROEMClutch switch.
[How was the installation?
Coupler and terminal are Quantity:This is a set of products. I was worried about the attached terminals, so I bought only the spare terminals in case I made a mistake. When you are temporary caulking, it is important to make a good shape of Heart to get a good finish. Also, be sure to check the type of terminals on the female and male side of the coupler, as they differ.
How was your experience with it?
Since it has the same shape as the 6ROEMClutch switch, the clutch switch function can be used simply by removing and replacing the OEMCoupler. (Please check CouplerMale and Female side before working.) It is also recommended because it is the same color, so there is no sense of discomfort.
View detail
Wiring cohesion is easy
The light case was organized and assembled securely.
I also used it for framesetc.
View detail
Fits: KAWASAKI Z1000 (air-cooled), KAWASAKI Z750 (air-cooled), KAWASAKI Z900 (KZ900)
For installation of CR Carburetor
I bought this product because it has a better cost performance than the OEM Product. I chose this product because it has better cost performance than the OEM Product, and it looks good because it is black while the OEM Product is a little greenish. View detail
It wasn't easy.
I bought it because I needed to change the handlebar.
I used WeBig because I was certain that no local Motorcycle parts store would be able to sell the parts I needed.
I think it is unnecessary for those who can do the processing themselves, but for amateurs, it was a very helpful part.
View detail
Required for MASTER exchange
[How is it used?
Used for Touring and city driving
Was the one you received as per Image?
Image
Was the installation difficult?
It was easy to install with the included screws.
How was your experience with it?
Accurate and easy to use
[Included Parts:were they on?
It was attached.
[Was there anything that disappointed you?
There is none
Other items that would be helpful
Availability and clarity of Instruction Manual
Instruction Manual is included.
Opinions and requests to Manufacturer
Wiring is so thin that I'm worried it will break.
View detail
Fits: HONDA PCX160, HONDA PCX125, HONDA GB350, HONDA DIO110, HONDA GB350S, HONDA LEAD125, HONDA FORZA250, HONDA CT125CT110 HUNTER CUB, HONDA SUPER CUBC125
Mounted on ADV160
At first I thought it was not necessary, but as I rode the car, the Engine stop became a hassle every time I took out the Side Stand, so I installed it.
It has become more convenient, although safety considerations must be taken into account.
View detail
difficult
The thickness of the Key has to be cut down considerably to fit.
If you cut too much, the Key will bend when you turn it.
View detail
I can make it myself.
Purchased to branch power from existing Bullet Terminal.
You can make it yourself if you want, but since it is a power supply, you need to use something like this in case of emergency.
One drawback is that the Wiring color is Black.
Since it is Body ground, it is basically Plus where these things are needed.
I wrapped Red Vinyl Tape around the Wiring.
View detail
Extremely convenient
You can fix a Cable of any kind anywhere as long as there is an M6 hole.
This product may not be necessary for OEMMotorcycle, but it is an itch product for Custom vehicles.
However, it is not strong enough to hold a moving object like a Clutch Cable or Brake Cable in place. It is only for bundled wiring.
View detail
It's got hair in it, and the claws are straight Type.
There was a hair in the inner bag. It's not food or anything, so I don't mind, but it's a little weird.
The claws of the crimping part (Large type) were straight.
I was expecting Emon to have claws that were rounded inward and easy to crimp. I would have preferred to buy a Rose at the local hardware store.
It's free at the Point, though.
View detail
Exclusive parts for Asuotani, for installation on Vf1100s.
Exclusive parts for Asuotani, for installation on Vf1100s. View detail
Exclusive parts for Asuotani, for installation on Vf1100s.
Exclusive parts for Asuotani, for installation on Vf1100s. View detail
Essential for maintenance and custom
[How is it used?
I used it to fix the hose and thermostat on my YAMAHA XJR400R. I also use it to put together the wiring of the electrical system and others.
How was your experience with it?
It comes in a 100-pack, so it is quite easy to use.
Also, a wide variety of colors are available so that you can use the color of your choice.
Personally, I don't like Custom's conspicuous in-hemp palmock, so I would choose Black, but I think it would be useful for electrical systems if you use a conspicuous color inside the car body or in other places where it is not visible.
How did it compare to other products?
You can buy them cheaply at 100-yen stores or home centers, but since weather resistance is important for motorcycles, you can trust POSH's products.
[Points to note]
Be careful not to cut them with a piece of paper.
View detail
SR400 Electrical Equipment Plate installation
Shallower than expected, Battery feels less secure. View detail
Always believable DOREMI
I always buy DOREMI products because I believe in technology.
Again, it was a Large hit, and I was more than satisfied with my expectations.
Replaced old Harness with new Harness and no electrical trouble.
It's been running fine so far.
View detail
It is longer than the one that comes with the Kit.
I used it for my FZ750 Full kit.
I ordered this one because the cord that came with the Kit was very Tight and I had concerns.
The shape of the Connector was exactly the same as the Kit. And the length of the cord is about 20 cm, so there is plenty of room.
If possible, we would have liked the attached cord to be this length.
View detail
Fits: その他 , HONDA NSR250R, HONDA NSR250R
For Waterproof Protection
Honda Series WaterproofBullet TerminalCover10 PairsQuantity:It was a set, so I bought it to protect the BlinkerWiring section, etc., and to use it for waterproofing.
The price is not that bad, there are a few of them, and the Rubber shape is not bad.
View detail
Different colors!
Functionally, there is no problem, but the color of the terminal is different between the picture shown on the website and the actual product received!
The photo shows Silver, and the received item is Gold!
I wanted to be inconspicuous and bought it because it was Silver….
View detail