Reviews
Particularly good for places where there is a lot of ROSS
Reusable Tie Wrap for easy removal.
It is especially effective for parts that are frequently removed and attached. It is a little thicker than regular tie wrap, so be careful, but I use it to tie parts that are often removed when disassembling.
Off-road motorcycles are especially used for this purpose.
The thicker the wire, the sturdier it is, so there is no need to worry too much. However, if you cut the extra length, you can only use the same length or a shorter portion.
View detail
The ability to release as intended is still an advantage.
Vehicles used in Races and competitions are often cleared.
If Tie Wrap can be Released in such cases, it can be used once more.
This is important.
But it's not cosmetic. Definitely.
But they are SDGs. Because they can be reused.
Even if you are not a "good" person, you don't have to use a nipper to cut it, so you don't have to choose a place for it. It is surprisingly possible even in a gap where tools cannot fit.
View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R SE, KAWASAKI NINJA2 Helmet50R EX250P
I don't want to hurt OEMHarness.
I want to use CouplerON as much as possible, because cutting OEM harnesses is a source of trouble.
Considering the price and construction, this is a very expensive product, but the advantage is that it does not damage the OEM's harness.
Installation is easy. In the case of the Ninja ZX-25R, remove the DummyCoupler and insert this product into the DummyCoupler.
The original DummyCoupler is simply attached to the Coupler on the other side of this product.
After installation, an energization test was also conducted.
Checked with Tester and no problem.
View detail
Fits: SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125S, YAMAHA CYGNUS X FI, YAMAHA BWS125(BWS), YAMAHA Axis Treat
High beamWiring
Mounted on Axis Treat
Purchased to add USB power supply
USB power supply cannot be used unless High beam is ON at High beam in Wiring.
View detail
Refreshing fit in Handlebar.
I asked PRO to put it on, but it seems that I need to be creative with the wiring, so they connected it in a way that does not put a load on the Battery.
It fits nicely in the Handlebar and looks good.
View detail
Switch
Refreshing fits in handlebar and looks good View detail
Although the shape is different from those made by Ekimon, Yaoki, and others.
The Crimp section has not been modified in any way, such as being slightly folded from the beginning, so it is a little troublesome to Crimp with Electric Works Pliers, but it is good for Crimping several thick or thin Cables at once.
In addition, the sleeves for waterproof and insulation are a little thicker than those of the Title companies, but there were no particular problems when they were mixed with those made by those companies.
View detail
male and female terminals
Provides quality and texture with Honda Std products I was able to do what I wanted to do with the feeling of use Please contact Crimper for the products you want to buy together Easy installation It is recommended to purchase several bags with high price performance and compare them to other products as a set WeBike packaging is always good. Shipping and packaging will arrive in a week Concerns and Precautions When purchasing, you may not only purchase by looking at pictures, but also carefully read or incorrectly purchase products consisting of men like me. This product consists of a terminal for men and a terminal for women View detail
Stable Manufacturer Products
I am looking for a fog Lamp switch and this is what I am looking for.
(1) Type that can be attached to Handlebar
(2) LED etc. to indicate when Fog Lamp is ON.
I didn't know that there was an Exactly product!
It is well made, and the large size is different from the Chinese-made ones on Amazon, so there is no discomfort as if it had been there from the beginning.
However, our RALLY50 has an external hand guard and brace bar installed, so it is a little tight, but we managed to install it.
View detail
Kiboshi Terminal Set
Quality and Texture Information Typical Jiboshi Terminal Set Full of Male Terminal for usability Product Inquiry Crimper To Buy With, Female Terminal Easy to install Cost performance and comparison sets with other products are affordable WeBike packaging is always great. Arrives in a week for delivery and packaging I ordered it after looking at the word "set" to see if the translation was wrong when I bought it, but only the Male Terminal came and checked the site again, and the notice came up that there were 8 Male Terminals. I need to order again because it's internalism. It goes well with Honda View detail
For branching
This is for use as a branch of a power supply.
110" 2PConnector, Pin Quantity:Set, but it would have been enough if we could have connected with other cheaper ones.
View detail
I would love to see it sold in rolls.
Installed on a GSX-R1000R 2019
Used as Wiring protection for retrofitted electrical components.
Generally, PVCTube is used, but it needs to be threaded before attaching the coupler, and if the wire is long, threading it is also a tedious process.
Furthermore, once installed, it is time-consuming to branch out in the middle.
There are also options such as Colgate Tube and Spiral Tube for wiring that has already been installed, such as Coupler,
Colgate Tube is not very good looking and is not flexible, and Colgate Tube is too stiff to begin with, and may give Damage to Wiring. (especially at both ends)
Spiral Tube is not very good looking, very troublesome to install, and has many gaps, so its protection performance is not very good.
and none of them were willing to actively use it.
That is where this product comes in.
This product is similar to the Colgate Tube in that it is a rounded Habit-attached Sleeve that wraps around the Wiring, so it is easy to put on and take off.
However, this product is different from Colgate Tube,
Cloth-like appearance and high texture
OEMHarness-like atmosphere and not too conspicuous
Flexible and Flexible
Not hard, so it is friendly to Wiring
and Merit everywhere.
It is the best, to say the least.
I am even wondering if I should buy it in Large quantity and Wrapping all the retrofit Harnesses with it.
NegativePoint is ….
If I had to say, it would be the selling method.
Since it is only sold in 1m lengths, it is relatively expensive and not available in lengths longer than 1m.
Also, although there are few situations in which more than 1 m of 1 pc material is needed, it is rare for 1 m to be used up in a good Drill, so a few cm of the SIDE will be Garbage every time.
I would like to see these products sold in rolls of 5m or 10m units.
It is also more eco-friendly, as no scraps are produced.
Anyway, I couldn't be more satisfied with the thing.
Personally, this is my best buy of the year.
We hope Manufacturer will consider selling the product in rolls.
View detail
CRF250L MD47 for ACCWiring extraction
Used on a 2023 CRF250L.
If you remove the Left Side Cover, you can access the upper area of the Accessory Case, where there is a 4-pin Optional Connector hidden by the Waterproof Cover. There is a 4P Optional connector hidden by the waterproof cover.:Since 2pc is ACC, we used this Connector to take out ACC and used it for ACC connection of DAYTONAD-UNIT.
View detail
This is a summary purpose of the branched Wiring.
[How is it used?
To consolidate additional and branched wiring in the front cowl of ADV160.
Was the one you received as per Image?
The size and texture were exactly as shown in the Image.
Was the installation difficult?
Simply remove part of the Cowl and reinsert the Wiring.
How was your experience with it?
It is nicely put together, and since it will also be Cover, we can expect Simple Waterproof.
View detail
Hazard Switch.
To the Hazard switch on the CUB.
It looks like a HazardButton, which is good.
View detail
Easy to use
Used for Wiring protection around Engine.
The Protective Tube is easy to install and looks like a tube, whereas a normal Protective Tube requires the Connector to be removed.
It would be even better to have Variation such as White color.
I gave it a 4 because it has just been installed, but I don't think there are any problems with its effectiveness.
View detail
I bought it because KIJIMA.
The paint on the button is rough and has a clicky, squishy feel to it. Also, I don't think it is waterproof. View detail
Wiring processing
The electrical system was disconnected, so I bought it in order to find the disconnected part in Tester and connect Wiring.
There does not seem to be much in the way of deterioration of the Bullet Type Terminal, but it is recommended to replace it with a new one when connecting a new Wiring. There is nothing distinctive about it, but it is recommended.
View detail
It can be used normally
It was rather expensive, but I needed it, so I bought it. View detail
KIJIMA KIJIMA Self-wrap Sleeve
[How is it used?
Dress-up Wiring in Quick shifter.
Was the one you received as per Image?
As per Image
Was the installation difficult?
It is easy just to wrap it around. Can be cut with Scissors to any desired length.
How was your experience with it?
It was a bit Race ish.
[Included Parts:were they on?
nothing special
[Was there anything that disappointed you?
nothing special
View detail