Reviews
connector set
Quality and texture information is no different from the std product It is compatible with Honda Std products for its usability You should have a wire stripper to buy together It's easy to install Buy based on cost performance and comparative brand preference with other products WeBike packaging is always great, arriving in a week for delivery and packaging Concerns, precautions, or advice on purchase If you connect the cable incorrectly, it is difficult to reunite There should be no failure from the beginning View detail
I used it for storage for my own Wiring blindfold.
Plus and Minus lines from Relay, which I made myself in NINJA.
Grip heater, YOSHIMURAProgress2Meter and USB power supply with Bullet Type Terminal
It is connected, but has been left bare until now.
I left it as it was because I basically don't ride on days when it rains,
I'm concerned about the Red Wiring glancing through the gap between the Cowl and Handlebar, and I'm not sure what to do with it.
I purchased this product to conceal and store the Bullet Terminal part.
6Quantity:The Large size was sufficient to hide the Bullet Type Terminal of Set+Alpha.
View detail
Safe and DAYTONA products
I purchased this product because the handling of the Brake switch has changed due to a change in the Braking system.
We chose DAYTONA because we thought it was not the part to go out of our way to buy OEM.
It is a safe part that is neither too good nor too bad, but it would be surprisingly useful if there were a lineup of parts.
View detail
Used in Horn's Flat Terminal
The Wiring for the car Both Sides was short and was used to extend it. View detail
Left
We used it for a completely self-satisfying Custom, converting Blinker's Wiring from Bullet Terminal to Connector.
Since it is orange, it is Leftfor Blinker on Honda vehicles. For external Blinker, Wiring is a different color from OEM such as BlackRed or BlackWhite, so it is a Connector color with Quantity:Pair (for Left and Right) It is also advantageous to be able to determine the
Although the Bullet Terminal does not cause any problems, we decided to replace it with the 6V MONKEY/GORILLA Main Harness in conjunction with the re-pulling of the 6V MONKEY/GORILLA Main Harness.
The blinker used is the Unbreakable lensMINI, which has a similar connector, but the shape of the connector is slightly different from that of the product in question, which appears to be a connector for XR100MOTARDetc.
I purchased this product by mistake. but you can pull the Wiring out of the Blinker's Connector and plug it into the product in question.
The only use I can think of is to purchase it for repairs on adapted vehicles, but if you replace the Bullet Terminal, it will make it easier to follow the Wiring. It will be easy to tell at a glance if it is a BlinkerWiring afterwards.
View detail
Replacement from Bullet Terminal
We used it for a completely self-satisfying Custom, converting Blinker's Wiring from Bullet Terminal to Connector.
Although the Bullet Terminal does not cause any problems, we decided to replace it with the 6V MONKEY/GORILLA Main Harness in conjunction with the re-pulling of the 6V MONKEY/GORILLA Main Harness.
The blinker used is the Unbreakable lensMINI, which has a similar connector, but the shape of the connector is slightly different from that of the product in question, which appears to be a connector for XR100MOTARDetc.
I purchased this product by mistake. but you can pull the Wiring out of the Blinker's Connector and plug it into the product in question.
The only use I can think of is to purchase it for repairs on adapted vehicles, but if you replace the Bullet Terminal, it will make it easier to follow the Wiring. It will be easy to tell at a glance if it is a BlinkerWiring afterwards.
View detail
Very ordinary Hira terminal
It is a very ordinary Flat Terminal.
I think it is rather expensive in terms of unit price.
However, if unit price is the priority, there will be too much left over and it will be hard to place Quantity.:If you search for a small quantity, you will find only products with "1 Set of 100pcs." and if you search for a small quantity, you will find only products with "Quantity:1 Set of 3pcs. etc., which is too small.
In this regard, this product is available in packs of 30 pieces, allowing you to choose just the right amount of salt.
Later, it is also a high Point that it is in a Plus Chick Case.
View detail
Fits: その他 , YAMAHA MT-03 (2015-), YAMAHA MT-25
Purchased for Wiring for Filler cap
I thought it would be better to use something dedicated to Wiring, so I bought it. View detail
It was not very practical.
[How is it used?
I wanted to use it to consolidate and redo Wiring, which is why I decided to purchase it.
How was your experience with it?
It was not very practical, as it lacked elongation and did not fit very well through Wiring.
Wiring is also limited to about two wires, and only HornWiring can be used.
How did it compare to other products?
I think Heat Shrink Tube was better.
[Points to note]
I thought the thicker Harness tube was better because it was more universal.
View detail
Frequent occurrence around Handlebar
I used it for a simple Kill switch Wiring recombination.
It's simple and I didn't have any trouble with it, but it's not suitable for areas where waterproofing is required.
There was also an assortment of products such as the Deutsche Coupler, so you can choose the right one for your location!
View detail
Power supply
It is a purchase as a Connector for the power distribution from the Meter part.
The shop in my neighborhood didn't have 9PType in stock.:Set had the lowest sale price on this product, which is a big help.
View detail
The Same Shape as OEM
I bought this one to use for my Side Stand Can Engine Starter Motor, I was looking for the same color as the OEM but couldn't find it and it looks like they don't have it, so I bought this one with the same shape.
The shape and so on are the same as OEM, so it is not a problem, but Male, Female, Tweezers, but the selling price is reasonable.
View detail
It was bigger than I thought it would be.
Not as Blinker's Connector, but as Quantity:I bought it as a coupler that can hold 2pc of wire in place at once.
Size is larger than the size you see in the picture, and it was not good for the application I was imagining.
The quality itself is perfectly fine, so if you want to use it to replace Blinker, etc., you can use it safely.
View detail
Used in 790DUKE's Rear blinkerCoupler
Things work fine.
However, it is not possible to crimp cleanly with ordinary Electric Works Pliers.
2.You will need Electric Works Pliers that can caulk 0mm
View detail
If you want to branch off, branch Bullet Terminal and this!
DAYTONADAYTONA:70803
Ca/Cw 104 Type Double Plug Pin [for Business Use]
I bought this for use in
I don't need 100 of them (laughs)
Sometimes you want to use them in a branch, so Bullet Terminal and Quantity:It is available in sets
But it does take up a lot of width, so my rating is a little low!
View detail
good
I do not know where to put in the Connector at first,. By chance I also missed one and worked in turn referring to it. I'm glad I bought it. View detail
[Webike Monitor] Since the ZEPHYR of which possession is done has also passed from sale for 20 years or more, there are degradation of wiring and an open circuit and partial exchange is needed. They are convenient goods when repairing
[Webike Monitor] Since the ZEPHYR of which
possession is done has also passed from sale for 20 years or more, there are degradation of wiring and an open circuit and partial exchange is needed.
They are convenient goods when repairing by uniting in a close color.
In repair also with partial
die length, since it is good exactly and does not become not much useless, it is often used.
View detail
Attachment is overly easy!! A switch is fixed with double-stick tape and it is coupler on! A switch is thick just for a moment. HI beam indicator lit up at the time of Wright putting out lights as notes were suited. But or [ that this is conversel
Attachment is overly easy!! A switch is fixed with double-stick tape and it is coupler on! A switch is thick just for a moment.
HI beam indicator lit up at the time of Wright putting out lights as notes were suited.
But or [ that this is conversely better ].
It is dissatisfied that I want you to attach at least five insulation locks and that the color of a switch is not liking.
View detail
Attachment was easy. It is also easy to operate it by the settlement of a switch being good. Since the dissatisfaction point did not have a water proof dustproof measure in the socket by the side of a bulb, the rubber currently attached to the ori
Attachment was easy.
It is also easy to operate it by the settlement of a switch being good.
Since the dissatisfaction point did not have a water proof dustproof measure in the socket by the side of a bulb, the rubber currently attached to the original socket was changed.
(It was uncanny hard work) When a switch was delicately large and the blind of a handle switch part was removed again, it did not fit in.
Since it was curving delicately with the Kami object of the blind, attached double-stick tape was not able to be used.
View detail
Fundamentally, attachment becomes illegal at the present motorcycle. I used for the classic bike of the time of Showa. Since supply of original components may be difficult if it is an old motorcycle, I think that it is very convenient as such a us
Fundamentally, attachment becomes illegal at the present motorcycle.
I used for the classic bike of the time of Showa.
Since supply of original components may be difficult if it is an old motorcycle, I think that it is very convenient as such a use.
Although there are a type clamped for a handle and the double-stick tape stop type here and both were tried, by simplicity, it is only the difference in the grade whether this is Kami for a while.
A difference is not in the engine performance.
View detail