Reviews
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
KSR2 is mounted and brightness is OK.
I installed it on my KSR2 and the brightness Level is OK both in Position and in Brake. Other users' impressions were that the brightness became dark, but with the KSR2, I was able to check the brightness even during the daytime and the Level is Large and sturdy.
The LED headlight is more expensive than the Pine Stripe LED headlight, so I can't say that it has superior cost performance, but the product itself is solid and a good product.
KSR is a small battery vehicle, so if you use a lot of electricity such as for an electric tachometer, water temperature gauge, smartphone charging, etc., it is recommended to use LED headlight and tail lamps to secure electricity quickly.
Finally, the packaging has been changed from a box to a thick vinyl package. I am concerned about the packaging of this delicate product if it is not packaged properly for mail order.
View detail
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
Brightness can be secured by attaching to KSR2
I installed it on my KSR2, and the brightness was maintained in both Position and Brake. I have seen some other people's impressions that the brightness became darker, but with the KSR2, the brightness is at a level that can be confirmed even during the daytime.
The price was higher than Matsu Stripe's LED headlight, so I can't say that the cost performance is excellent, but I think the product itself is a good product.
If the vehicle is powered by electric power (e.g., electric tachometer, water temperature gauge, smartphone charging, etc.), we recommend using LED headlight and tail lamps to secure the power.
Finally, the packaging of the product has been changed from boxed to thick vinyl, which is a bit worrisome since it is a Delicate product and if it is not packaged well, I would be concerned.
View detail
The night is fun.
It feels quite bright.
If you adjust it with the mounting angle, you may not be dazzled by oncoming cars, etc. lol
View detail
Fits: HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA SUPER CUB110ThailandMODEL, HONDA SUPER CUB110PRO
very good
I really liked this product. It was cheap and the delivery was very fast. I will definitely use it again next time. Thank you. You can definitely feel that the quality of the parts is different from other products.It was also very easy to install. -------------------------------------------------- -------- I really liked this product. It was cheap and very quickly delivered. Thank you again. It seems that the quality of the parts is certainly different from other products. The installation was very easy and good. Powered by Google Translator View detail
There were no problems.
The light came on without any problem. I was able to use it normally. View detail
Blinker I just switched from a 10w to an 8w bulb and it doesn't blink.
Simply remove the OEMRelay and install the Mukawa Relay in the same way.
I appreciate that it also comes with two different Adapters.
I would appreciate it more if the price was more affordable!
View detail
Brightness is no problem
[How is it used?
I bought this for Main's XJR1300C.
We used Rizoma's Fender Eliminator Kit, which came with the Fender Eliminator. [Color] I have been using Clear's LED Tail Lamp, but I wanted to change my mind, so I replaced it with this Smoke Tail Lamp, which has the same mounting pitch as the LED Tail Lamp.
Was the one you received as per Image?
Image Street [Color] Smoke is a nice touch.
I didn't expect it, but it was the exact same Lamp as the Tail lamp that came with Rizoma's Fender Eliminator (lol).
It was probably a Tail lamp from the same country of production (China or Taiwan?). It was a Tail lamp of the same country of production (China or Taiwan?). No way, no way. (LOL).
Was the installation difficult?
There is nothing particularly difficult. The Bullet Type Terminal has already been carefully processed on the Body side.
How was your experience with it?
I am happy with the nice Smoked lens.
[Included Parts:were they on?
Bullet TerminalQuantity for Wiring process on the body side:Set is included.
I didn't use it, but...
[Was there anything that disappointed you?
The Rizoma Tail lens had EMark, but the Mukawa Tail lens did not.
I think they are exactly the same, so it would be more secure to have them when installing them on a motorcycle that is subject to vehicle inspection.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA DAX, HONDA LITTLE CUB, HONDA LITTLE CUB
Sp takegawa smoke tail
Very nice product takegawa as always, quick shipping with good quality of packaging, thank you we bike are the best View detail
Fits: Others , HONDA Giorno, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA MAGNA 50, HONDA JOKER90, HONDA JOKER Helmet, HONDA GIORNO CREA, HONDA GIORCUB, HONDA DREAM50, HONDA DAX, HONDA Byte, HONDA TODAY, HONDA TODAY
Very good product
It is inexpensive and very stylish. This is my second purchase.
Replacement can be done with a Phillips screwdriver.
View detail
bright
If it was so bright, I wondered why I hadn't put it on sooner.
The brightness is perfect, but I had to buy a Crimp Tool for the Bullet Terminal, and the Crimp did not work well, and I am a novice at installation.
It would be even better if Wiring would sell it complete, even if it costs a little more.
View detail
Fits: KAWASAKI KLX125, KAWASAKI KSR110, KAWASAKI Ninja250R, KAWASAKI KSR110, KAWASAKI D-TRACKER125, KAWASAKI KSRPRO
Can be attached to VULCAN400S.
Installation
Dedicated to a few comrades, the VULCAN400S Blinker is a ninja250r (2008-2012) The same parts can be installed without any modification.
However, it takes some time and effort because you have to remove Headlight and Rear Fender after all.
Also, I was troubled that the Bullet Type Terminal of Sub harness was very hard. Is it like this?
[Regarding the clarity of the Instruction Manual.
There were some impressions that the Instruction Manual was difficult to understand, but I think it is easy enough to understand compared to the ones that only show pictures of foreign countries. I didn't have any particular problems.
[Try it.
I am satisfied with the look of the product, as it turned out almost exactly as in the Image.
Well, after all, if you're going to go through the trouble, wouldn't it be better to use LEDs? I can't really argue with that.
View detail
Standard Fog Lamp
I bought it because I was worried when driving on roads without street lights.
There are many Fog Lamps brighter than this product,
We decided on this one after considering the impact on battery, etc.
Wiring is a little troublesome, but if you follow the Instruction Manual carefully, you should have no problem.
The wiring that is inserted from the Fog Lamp into the gap between the Fog Lamp and the Stir will stick when the Handlebar is full.
View detail
Fits: HONDA GB350S, HONDA CL500, HONDA CL250, HONDA REBEL1100, HONDA REBEL500, HONDA REBEL250
Good parts that do not break the OEM style
This is for people who do not want to disrupt the OEM style as much as possible.
It is much brighter than the OEM, and the light is also clear on/off, which is good for Parenthesis.
The tediousness of the work is unusual, but well worth doing.
It's a part of the ride that you can't see yourself, but it makes a clear differencePoint.
The product itself is of high quality as it is priced at nearly 20,000 yen, but the printed manufacturer's logo is visible instead of being uneven, so I think people will like it or dislike it.
View detail
Fits: HONDA Dio110, YAMAHA CYGNUS X, Others , YAMAHA BWS125
For VSTROMSXBlinker Valve replacement
I purchased SP Mukawa's Plating Valve to fix the orange bulb that I could see through the OEM Clear Lens. The only thing I was worried about was the amount of light, but it is sufficient and looks Refreshing! View detail
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB 50, HONDA SUPER CUB 50
I have tried to install it on the CUB but...
I was given a pair of Smoke Blinker Lenses and installed them, so I purchased these lenses for a sense of unity and dress-up.
When the car stops, everything is [Color] Smoke gives a sense of unity and enhances Parenthesis.
However, unlike the Blinker, the Motorcycle's BrakeLight lights up along with the Headlight when the key is turned on and the Engine is ignited.
Although it was darker than OEM, it wasn't as disappearing as the car, so it was half as effective...
In the strong light when I put Brake on, it looks more like Pink than Red...
I guess I was a little disappointed for the price.
However, since it is a Mukawa, the texture and precision of the objects are unquestionably good.
View detail
UniversalBlinker.
I purchased the Jixxer 250 for rounding Light.
I wanted to create a Retro feel, so instead of the sharp Type of LEDs.
We went with the old-fashioned Light Bulb Type.
I felt the kindness of the Manufacturer in the 10W and 15W bulbs included.
View detail
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
Used for CUB90
CUB90 is equipped with external Tachometer, various sensors, USB power supplyCoupler, and LED on the Tail to reduce battery load.
The bulb power consumption of the NORMAL is 15W/8 and the LED is 21W/5. The LED is not labeled in Lumen so I did not know how bright it was but I trusted Brand.
The large size is a little smaller than a light bulb, the bracket is in good condition and the tail lens has not been hit.
I read that it was a little dark in the impressions, so I cleaned the tail lens and put aluminum tape on the tail case, which is an old-fashioned way of doing things.
The Tail Chica-Chica is a little bit when the Idling is on. Stop-lamp is powered by battery, so it does not ChicaChica. The light is bright enough to pierce your eyes at some angles.
When the Lens is turned on, the ChicaChica of the Tail is not felt. The brightness of the Tail is about two-thirds that of the bulb, and the Brake is about the same or slightly stronger than the bulb, which is fine.
Tail is AC so ChicaChica is not an option but I don't know how it is for the life of the LEDs. I have been using it for about 6 months and so far no problems. I remove the Lens every once in a while, but it is not burnt or deformed.
After installation, the charging voltage did not change during idling. Battery load seems to be decreasing. I think it can go as it is.
View detail
DrivingLamp rather than fog.
Installation is easy. The only thing is that fitting the Wiring inside the Headlight case is very large and odd….
This Light is very bright with low power consumption (6.5w)! However, it has no Cutline and Spot light distribution and has the same structure as Stroboscopic light (flashlight).
Therefore, glare is generated, so care must be taken to turn the Body down or turn it off when passing an oncoming car.
The Headlight of the CT110 HUNTER CUB is said to be dark, and since it is used to compensate for this, I personally felt it was better used as a DrivingLamp and unnecessary in the city where streetlights are bright. I would recommend it to those who often drive on country roads or mountain passes.
View detail
Fits: HONDA GB350S, HONDA CL500, HONDA CL250, HONDA REBEL1100, HONDA REBEL500, HONDA REBEL250
Custom feeling is good
I was not dissatisfied with the OEM, but bought it because I liked the way it looked.
The OEM was simple with only the intensity of the Light, and the light of the LED attached to the flat base was diffused by the Cut inside the Lens to make it look three dimensional.
The installation to the vehicle is a simple nut installation, but since this part is common to CL and REBEL, the cable is long and the tip is coupler, If you have never done wiring processing before, it is better to ask a shop to do it.
If you are familiar with the Wiring process, it takes about 30 minutes from Seat removal to replacement.
Although they are highly visible day and night, and give a custom look, they are completely self-sufficient items because they are not visible at all while the driver is riding.
The gap coking is also well done as far as I can see, so there seems to be no worry about flooding.
。
View detail
Blinker elimination for bad eyes
Introduced to eliminate Large noticeable Grom's Beanball Blinker.
Installation was easy and the quality was high. The price was also … lol
View detail