Reviews
safety material
Product Name
K-CON KITACOConvenienceParts K-CON Blinker/Tail Lamp Conversion Harness Set
Item Number
0900-755-01104
Vehicles
NINJA400
Number of man-hours
5 minutes depending on the work
Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect.
Why did you choose this product?
For the sake of pimping.
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
It's for pimping, so it's easy!
How was your experience with it?
I'm glad it works properly. Well worth the price.
[Included Parts:were they on?
nothing special
[Was there anything that disappointed you?
nothing special
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
It can be used for Indicator Lamps such as ETC.
I used this product as an Indicator Lamp for ETC etc. I casually embedded it in a Cowl so it looks Refreshing. View detail
I'll have to take advantage of the Option.
When using i-mapHarnessKIT for groms, there is a Connector for error detection that lights up when it detects an error between i-map and injection.
This time, I installed the LEDIndicator Lamp which connects to the Connector for error detection of Option.
The LEDIndicator Lamp that I purchased is The "KITACOConvenienceParts:LEDPilot lamp It is. This commodity, the price is cheap, and also there are five colors of Indicator Lamp color. Red was chosen in order that the setting of this time might direct an error detection.
Where to install the LEDPilot lamp when installing it? Also, where's the best place to look! The most suitable place was the front of Tank Cover for my GROM. Once the installation location is decided, I checked the LEDPilot lamp dimensions to see if there is any unreasonable contact with the LEDPilot lamp, and if it is possible to install the LEDPilot lamp, I put the masking tape on it and start to fine tune the actual LEDPilot lamp installation position. This is a tedious process but it is a good way to ensure that the finished product will be in line with Quantity:Pair (for Left and Right) It is important to check again and again to make sure that the hole is properly positioned. After the positioning is finished, next, because the size of the preparation hole is described in the Instruction Manual of LEDPilot lamp, you should do the preparation hole processing described in the Instruction Manual. Large is to process up to the specified size. It is recommended to work carefully on the preparatory hole processing and check several times while proceeding.
When the installation process is completed safely, I will extend the LEDPilot lamp Harness. At the time of purchase there is about 30cm, but because there was about 50cm from the position which was installed this time to the Connector for error detection, it is extended using the 0.75sq. wire of Emon, Bullet Terminal processing is done, and it connects to the Connector for error detection. The handling of wiring was installed along the OEMHarness so that there is no impossibility.
When the installation work ends safely, operation check work is done. First of all, set the Ignition key to ON (you don't have to turn the Cell) as usual. If it is normal, the LEDPilot lamp will not blink. Next, remove the injector coupler of i-mapHarness from the InjectorBody and turn the Ignition key to ON. You have completed the operation check. The operation check is finished. Install the detached injector coupler to the injector body, and if the Ignition key is turned on and the LEDPilot lamp does not blink, the operation is complete.
LEDPilot lamp is also cheap, this time I worked on it because I wanted to use the i-map error detection option of the long-awaited LEDPilot lamp.
View detail
Used during the Blinker exchange
I used it to replace my Z900 Blinker with an Other Brand Product.
The plug size does not match with the Blinker that I bought this time, so I modified the female side, but I can use it without any problem.
View detail
Tail Harness but used for the Head
It is used to convert the headlight of XR100MOTARD to LED
In case of emergencies, the Headlight should not be disconnected from OriginalHarness We introduced this Harness with the assumption that it would be replaced
Naturally Bolt On. unprocessed, even when reverting to OEM Valve in an emergency If you're installing a trusted overseas Valve, you should be prepared for this much
It used to go unlit in the suburbs at night when I was returning home from work, with no lights on and only work light I had Accident to go home, so I thought it was best to be cautious, and Valve and tools were It's always on hand
View detail
[Webike Monitor] CBR600RR was equipped. In forming Fender less, it purchased in order to also exchange a Tail lamp for an external article. The Tail lamp of CBR600RR is the thing in which the Tail light and the License light are unif
[Webike Monitor]
CBR600RR was equipped.
In forming
Fender less, it purchased in order to also exchange a Tail lamp for an external article.
The Tail lamp of
CBR600RR is the thing in which the Tail light and the License light are unified, and the thing of 3P with a white wiring Coupler is used.
Is this conversion Harness necessaries for those who damage and cook a pure Harness and who are not?
View detail