Reviews
Fits: KAWASAKI ZX-6R, KAWASAKI ZRX1200DAEG, KAWASAKI Z250, KAWASAKI Z1000 (water-cooled), KAWASAKI Ninja400R, KAWASAKI Ninja250, KAWASAKI Ninja1000
For your first Custom! Made in Taiwan! No visibility problems!
There is no difference between this product and the OEM Product except for the color. I did not feel any impression of poor workmanship.
The Blinker's visibility is not reduced during the daytime, and it successfully combines practicality and good looks!
View detail
Fits: KAWASAKI Zephyr χ, KAWASAKI Zephyr 750 RS, KAWASAKI Zephyr 750, KAWASAKI Zephyr 110, KAWASAKI Zephyr 110 RS, KAWASAKI ZRXII, KAWASAKI Zephyr 400
That's not the picture
It looks shiny in the photo, but the actual product is dull. View detail
Do you like the color Orange? Amber.
What is Amber? At first I thought, "What is Amber?", but this time I bought it and used it.
Orange color is a good color, so I was satisfied with the color.
View detail
It glows well!
I replaced the Valve as soon as possible.
It's a bit of a blur.
View detail
Fits: KAWASAKI GPZ750 R, KAWASAKI GPZ900 R, KAWASAKI ZR-7, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400, KAWASAKI GPZ750 R, KAWASAKI GPZ900 R, KAWASAKI ZR-7, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400
good
Used on the ZrX1100's rear blinker Before installing this product, the front blinker has a front blinker made by POSH [Color] Installed a SmokeBlinker
FrontPOSH and Rear is a mismatched spec. called Jills, but the quality of both are It was finished without any discomfort due to its solidity
The only thing that bothered me was that there was a lot of BALI left on the product, so I had to tighten the screw as it was Sometimes it didn't close tightly enough and had to be sanded down
The POSH product could be installed without such a thing
View detail
Fits: HONDA CB400 SF, HONDA CB-1, HONDA HORNET 250, HONDA JADE 250, HONDA VTR250
Shifting on installation
There seems to be a variation in the accuracy of the screw hole on this side, and there is a slight deviation of about 1 millimeter when it is installed It was generated If you're interested, you may need to do some additional processing [Color] The Smoke look is very dark and cool! View detail
Cheap and easy to use
I installed in the 2017 SR. It is necessary to shave a little, but it is not a work that did a big charge. Also, we need M3's 15 mm Screw. Well, Screw is available at Home center as soon as possible. There are oddly high similar items, but I am satisfied with this item. Boobs Blinker, the atmosphere is good! View detail
The side BALI is Spec. is.
I was disappointed..
About 5 mm of BALI remained on the side of Blinker lens.
1pc. Not only 4 were in this state.
Although there is no complaint if it is a part that can not be seen after installation,
It is remarkable because it remains on the surface.
When I contact Manufacturer, this is Product Spec. apparently.
If it is Clear Lens it may not be noticeable so far,
It's quite outstanding because of the Smoked lens.
I think that it is better not to buy it except absolutely those who can handle to Beauty.
View detail
Fits: KAWASAKI GPZ750 R, KAWASAKI GPZ900 R, KAWASAKI ZR-7, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400, KAWASAKI GPZ750 R, KAWASAKI GPZ900 R, KAWASAKI ZR-7, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400
Excellent compatibility with SmokeTail
I also exchanged this as Tail was made Smoke
Although it was not in the explanation, Amber 's Valve was also attached
However, both are double valves ...
Font Blinker is Double Bulb and it can be used because it becomes Position with Key ON ...
Rear is a poor position and angle in the mouth Gold Poses are different, so you can not use it as it is
For the time being, if it feels like Pin 1 pc. Once you scrape or drop it with Nipper, you can use it once.
Double Bulb has 2 contacts of Valve, but the TailBlinker part has only one point of contact, so if it is in contact it will light up when Blinker ...
However, because there is no Pin in one side, it can be said that it swings immediately with the vibration, so if you use Valve, you can get Valve's Home Center and AutoBacks around for Rear to get Amber's Single Bulb I think it's better to keep it.
In my case I replaced both LED Bulb back and forth
Although it is a point of caution at the time of installation, it is a feeling to tighten with a Tapping screw like Tail and dig into a thread, so once it is tightened, once it is tightened, it is sure that you take off the tuna and tighten it again
Since Crack enters or it is broken as you keep tightening up to the end as it is ...
This also has four holes Gap and Woundetc. There was not too good condition.
I am worried about that point if it is overseas cheap, but for GPZ it's a lot so there are few Rose stuffs so I guess ... (Lol)
Although I do not know whether it will be a reference because it is exchanged for LED Bulb, it was also that this time when Position also in the daytime, the brightness at the time of lighting is necessary and enough, the vehicle inspection will be cool
It is good because the price is also cheap and the atmosphere changes at a stretch
Recommendation for exchange with Tail lens
View detail
I was worried.
We made 4 Inch with 4 Inch and 5 inches
Small I thought it was a good idea but it was perfect Large
I was glad that the LED Unit fits into this but it did not enter truly
View detail
Refreshing around the Front
I bought it for Refreshing because the Front around was cluttering. Making is solid and appearance also improved Parenthesis and I am extremely satisfied. View detail
There was absolutely no strength
Even though I did not narrow it down with Torque like that, the Screw club got stretched.
Spring washer's Spring I got this condition in the margin. I think only as poor strength.
View detail