Reviews
Rin Parts Rin Parts LED compatible rectangular blinker relay
Purchased as a spare for LEDs.
Blinker relay for MADMAX MADMAXLED is better in terms of texture
But it's inexpensive in price, so I thought it would be just right for Spare.
View detail
Visibility is ◎ but certainly not water resistant & UV resistant
The quality is good for the price and the visibility is good, so it's not bad.
But it is certainly vulnerable to UV rays and rain lol Cokingetc...I think you should take your own measures!
View detail
fat eyes
I bought this LED because the same one was out of order.
Quantity:2pc. One of the Set is the out-of-quantity:1 Set of 2pcs. so I had no choice but to use Quantity:1 Set of 2pcs.
Lynn Parts LEDs last 2 yearsQuantity:2pc. One of the Sets is still Large sturdy, but we have now added a Quantity:2pc. Quantity of Set:Since I purchased the Set, I put on the newly purchased LED Light.
This product is sturdy and durable, both high and low Large without flicker.
View detail
Cheaper than buying OEM Product
I bought the cheaper one because the OEM product is 5 times more expensive than the OEM one. View detail
It is bright. And it works without a glitch!
[How is it used?
We were the first to replace all NORMAL bulbs with LEDs.
Was the one you received as per Image?
I thought it was a little cheesier than Image.
Was the installation difficult?
It is easy, because all you have to do is replace the bulb.
How was your experience with it?
It was a SocketOn on a CB1100.Wiring was no problem and it is nice and bright. The durability is also no problem even after 6 months.
When I first used it on another car, I put the Brake Wiring and the normal PlusWiring on in opposite directions, so I could hardly feel the difference between the Brake and normal lighting.
I have seen similar descriptions from other impresarios, but I think this is a symptom of when the Brake wire and the normal Plus wire wiring is reversed.
[Included Parts:were they on?
There are no Included Parts:other than the bulbs.
[Was there anything that disappointed you?
So far it is bright, reduces heat and Watt number, and has no durability issues.
Tail lamps are easy to use when changing to LED bulbs, and are a great recommendation because they are inexpensive and have a large effect.
View detail
Headlight
Worst dust Waterproof on the back side.
If you don't devise a way to deal with it, even though it's a supported product.
It is fatal that it does not
View detail
ledHeadlight Bulb
Because I can see the Black part.
I think White would have been better.
View detail
Mini LED Front Blinker from Rin Parts
* About quality and texture, The blinker housing base is made from a white plastic and the blinker lens is made from a lightly tinted plastic. * About the feeling of use, Great look with the use of these mini LED blinkers, the front end of the Grom is much more sleek without the need of bulky front turn signals. * Products to buy together, Being a LED blinker the Honda OEM flasher relay will not be able to operate these at the correct flash rate so you also need to purchase a LED resistor kit to add in-line to correct the flash rate. * Difficulty of installation, Installation requires headlight removal and then the headlight side shrouds to be removed to access the electrical connector and mounting hardware. With the LED blinker not having a Honda OEM style electrcial connector you will need to change either side so this issue is resolved. The process was completed in 60 minutes with a little difficultly. * Cost performance and comparison with other products, Cheapest pricing you will find for mini LED front blinkers that looks great and do the job but if your budget is not limited and you want the best then checkout the product from TST. * About shipping and packaging, I am happy to wait 8 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems. * Any concerns, cautions, or advice when purchasing, If you are going to be using LED blinkers at the front and rear then a LED flasher relay will be a better option then having in-line resistors at both ends to correct the flash. Use the product reviews to assist in making a decision on your purchase. View detail
12VMONKEY installation
I installed it on my '01 AB27MONKEY.
I bought it because I thought it was a consumable item and the price was good.
It takes less than 5 minutes to install, just remove the side cover, remove the band that holds the Relay in place, apply contact lubricant, and replace it. The initial movement is solid, now if only it would last longer!
View detail
I think it's good because it's cheap
Since I own two ZOOMERs, I'm going to stock up on some of these. I don't know about durability yet. View detail
Durability is difficult
Used in the tail lamp of Off-Road Machine for a little over one year and three months. 。 It's broken.
Is the gold-mouth part and the light-emitting part unglued? We have separated them.
Durability at a price! I guess that's what it's all about....
View detail
B grade product
I was worried because it's a 2-pack and cheap
I have a hunch (laughs)
problem
1) Foreign objects on the glass
2.Glass transforms large
3. Once the foreign matter is removed, the color of the glass is also changed [Color] Clear
Perhaps you haven't inspected it with the FOR JAPAN MODEL
Where was it made? It's probably made in Large land
Now we'll see how durable it is
View detail
untimely (e.g. death)
Out of the ball after only 5 months of use.......
Is it usually like this?
It's this big?
I re-purchased it because I had to, but I don't know what it is..
What's the guarantee? If it's there, it's an unconditional replacement response, because it doesn't last six months..
View detail
Cospa high
I used it as a Front Blinker
Even in the daytime, the light from the front is so bright
Visibility from the side is not so good due to the directionality of the LEDs.
The construction is a bit chancy, but at this price, it's OK
Cost-effective!
View detail
Cosmo!
This item is labeled as being for ZOOMER only, but it will fit a ph7 motorcycle It can be installed by hand
I'm using it on my APE50 FI and this is my third Repeat purchase, and I'm out of LowLight! So I bought a new one
First and foremost, it's a lot brighter than OEM! Then Quantity:We're buying Repeat to the point that it's around $1,200 for 1 Set of 2pcs
Maybe the fact that there are two ZOOMER Headlights means that Quantity:I think it is sold in 1 Set of 2pcs. but you can use it as a spare if you have a single head So good!
The same kind of product will cost you over $1,000 for one cheap one, so Large is very useful!
And it takes less than two minutes to install!
Valve is blue, but the light is white!
In the meantime, if you're just looking for a cheap, whatever-it-is, you can buy it!
View detail
dark
Tail lamp is bright but Stop lamp is too dark. You will not notice that you stepped on Brake. Three times the brightness of the Tail lamp is unlikely.
View detail
I can not recommend too much!
Although it fixes with back lining Nut during installation, the foundation is fragile, as the base is tightened, the base has come off the base.
I managed to fix it myself but I had to raise Quality a little more though it was cheap!
Sorry!
View detail
bad
What I bought for the first time is running out in two months and I say to myself that it was Hapap and saying that it will be over in one and a half months of what I purchased additionally - - -
Cost performance is the best, but this product is tough - - -
View detail
Must do improvement
fantastic quality easy to install are very visible even in bright sunlight despite the dark tint and just make the bike look so much cooler View detail
good material but...
This is a well made part, but it is sized too small for the American Honda Ruckus head light. Maybe it would work better for other aftermarket headlights, but I could not use it do to not fitting my Honda Ruckus. Oh well. View detail