Reviews
Fits: HONDA CBR1000RR, HONDA CBR600RR, HONDA CB1000R, HONDA CB650F
TST TST Brake Light modulator
Was the installation difficult?
Simply interrupt the Wiring of the Tail lamp.
How was your experience with it?
I think it will reduce the RISK of being rear-ended.
[Included Parts:were they on?
Instruction Manual and Sticker are included.
[Was there anything that disappointed you?
▼There are 3 patterns of luminescence.
1, Electronic flash alert
FLUSH several times during initial lighting and continue lighting as normal.
2, PulsarBrake Alert
Continuous FLUSH when BrakeLight is on 。 This is a feature that is Standard Equipment on today's luxury and high-grade vehicles, or Race vehicles (Endurance Race vehicles, driving in the rain, etc.).
3, IntermiTentPulsar
There is a momentary pause between PulsarFLUSH "Intermittent." FLUSHPattern of the
View detail
Used for ninja250R
The blinker of the NINJA2 Helmet50R broke, so we diverted this one.
Cars with similar holes can usually be installed.
Unlike the OEM stick blinker, the Small is hard to see because of its poor angle.
I think the design is good and modern.
View detail
Cosmic LED Flashing
I bought it because it is one of the cheaper LED blinkers and its shape is horizontal and not sequential.
It looks like a manufacturer in the United States, but there is an installation video on the official YouTube Channel, so I watched it and installed it and it went smoothly.
If you look closely at the finish, you can see some plastic molding marks and a little BALI.
I chose the Smoked lens, and I think it looks good without the Orange standing out.
View detail
It can be used without problems
Installed with no problems and flashes well.
The screw and nut of the mounting part are made of plastic, but I don't think it's a problem because it's not the part where the load is applied.
View detail
Fits: KAWASAKI ZX6R, KAWASAKI ZX10R
It looks good!
[How is it used?
I wanted to make the Motorcycle look Black, so I just used the Stop-lamp.
Was the one you received as per Image?
Street Image
Was the installation difficult?
It took about 30 minutes.
How was your experience with it?
If you also use Blinker, you can Refreshing, but it won't pass inspection.
[Included Parts:were they on?
It came with a cheesy Relay.
[Was there anything that disappointed you?
I could sell it for a little less.
Other items that would be helpful
Request Maybe I should just use Stop-lamp and offer a cheaper version.
View detail
Can be used with JC92 * Requires processing.
I decided that this was my only choice for front blinker.
Processing is required for installation.
The Position light will not light up. <If you modify the wiring, it will turn on.
When installing, it is possible to install if the original Rubber cover is cut off with Cutter.
Because it cannot be fixed with PlasticNut of the attachment, it is fixed with TNut M10x25x1.8mm.
TNut sells them at Home center.
I'm sure there are individual differences, but only our Right Side is damp and cloudy. (Lol)
View detail
Fits: KAWASAKI Ninja 400, KAWASAKI Z125, KAWASAKI Z900, KAWASAKI ZX6R, KAWASAKI Z400, KAWASAKI Z650, KAWASAKI Z800, KAWASAKI ZX10R
Not so convenient
The functions of the modular are good but programming is a bit inconvenient because you need to open up the cover. Should have provide a small hole for adjustment. View detail
Too big NORMAL to Sharp
Installed on z125 pro
A little modification is required for installation.
However, the Blinker display in the Panel doesn't blink after I put it on, so I'm thinking about what to do.
View detail
Fits: HONDA CBR300R, HONDA CBR250R, HONDA CBR250R
Cosy, good looking, EMark certified product!
I bought it in order to replace the Front Blinker of '14 MC41 CBR250R with the LED Blinker of the embedded type.
Because the thing of the thing made of TST had the official introduction animation etc. on the Net and seemed to be the most decent product, the thing of the thing made of TST though the thing made of Hot bodies and the Chinese product were considered.
There are two types of fitment, easy fitting and full fitment.
Because Cowl is White, I chose Clear Lens which is not conspicuous when wearing it.
Big surprise when I saw the package that arrived, just a ZipBag with the product and mounting parts.
There is no Instruction Manual.
Well, it's inexpensive, so I guess they're cutting costs.
The quality of the product itself is comparable to other domestic parts. The Bullet Type Terminal is already installed, and the waterproof coking is done at the wiring exit. The price is very reasonable and the quality is excellent.
Also, I didn't have any explanation for this, so I didn't know it until I saw the product. This is a happy miscalculation.
Easy fitting, just replace the OEM Blinker. (It doesn't ExactlyFit, so positioning is necessary) However, the ear part of PlasticNut interferes with the inside of Cowl, and it cannot be installed.
No modification" means that the product can not be installed without modification;
So, it is necessary to shave the fat part of the ear of the image to a small size.
The fit is slightly gaping when you look at it up close, but considering the Cowl process, it's acceptable.
The brightness is honestly more than I expected and the visibility from the side of the vehicle is good.
Visibility from the front is not good because it is an embedded type.
By the way, even if I used it together with the Blinker positionRelay made by POSH which makes it possible to correspond to LED Blinker while keeping the Blinker position function of OEM alive, I could use the Blinker operation and the dimming operation at the time of Position without a problem.
For these reasons, we recommend the Blinker to those who want to embed the Blinker and refreshing the car body, because the quality is good for the price.
If you want to improve visibility purely, it is better to look for Bar type instead of embedded type.
View detail
The Material is a bit cheap.
I bought this product because the Blinker on the Rear does not look SMART.
Stop-lamp and Blinker are also available in several different lighting patterns, so I am very happy with them.
There was no installation instruction manual attached, but if you can do daily maintenance, I think you can install it easily.
It was also good that Wiring could be ponied to the OEM Coupler.
Unfortunately, the Material of the tail lamp was a bit cheap, but overall I was satisfied with the product.
View detail
Fits: YAMAHA FZ-07, YAMAHA FZ-09, YAMAHA FZ-10, YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-10, YAMAHA XSR700, YAMAHA XSR900, YAMAHA YZF-R3, YAMAHA YZF-R1, YAMAHA YZF-R6, YAMAHA YZF-R6s
Will the car pass inspection?
BrakeLightMODE:Standard、Pulsar、Electronic flash。
A modulator that allows the StopLight to blink when braking
Installation is as simple as connecting to the OEM Coupler
Instruction Manual was not included, but if you imitate the operations in the video, you can use the Easy to adjust
The blinking speed depends on the number of times of blinking (10 times blinking), so you can make the blinking speed faster Then the flashing PatternCycle is too fast and a bit lame
I wish I could adjust the blinking speed without changing the blinking time
It always works during braking, so if there is a system that works during rapid deceleration or high speed deceleration, it will work It's even better if it's a good idea, but it's not going to be possible at this price, and Wiring is going to be complicated
The same Coupler from Yamaha seems to be able to be installed, but I'm not sure if it will work
View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA FZ-07, YAMAHA YZF-R3
Scratch
I ordered from singapore and takes 4 days to deliver. Fast delivery however when i checked the item have some scratch the packaging is ok but i don't know why some scratch. View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA FZ-07, YAMAHA YZF-R3
Trusted Delivery
I'm Anwar from Malaysia. Shipment take time around 18-19 days for item delivery. Satisfy with item, delivery and condition product. Easy to install. Just plug and play. View detail
Refreshing and Parenthesis OK
mt - 09 sp was interested because Blinker came out under the Tail Lamp.
After removing the Rear blinker with this item, I refreshed and it became cool.
Just a car inspection is impossible.
View detail