Reviews
Fits: YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, Others , YAMAHA SR400, YAMAHA XJR1300
SRX400 (3VN) Savior of the
SRX400 (3VN) The Arm part of the Blinker is made of rubber, so it breaks off over time. Each time this happens, we have been replacing it with OEM parts, but the price is 10,395 yen! I was looking for other brand products and found this product. There is no SRX400 in the list of compatible models, but there is SR400, and it is Wise GEAR, and it looks the same, and the name of the product is "SRX400". "Universal I bought it, and it fits perfectly. the diameter of the recess of the Rear Fender and the position of the potch are Exactly, and the shape seems to be the same as the OEM. As you can see in the picture, the color of the Lens is Clear, but the Valve is Amber, so I thought it was OK. The price is about double compared to other brand products, but I was able to buy it for 7/10 of the OEM price, so I am satisfied with it. View detail
Fits: YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, Others , YAMAHA SR400, YAMAHA XJR1300
It went on easily.
Although it was described as mediocre, it is exactly the same shape as the SRX400 (3VN) OEM blinker, and I was able to install it without any modification.
I also like Clear Lens.
The quality is good, as it is a quintessential Y’sGEAR product.
View detail
Fits: YAMAHA Bolt C Spec, YAMAHA bolt, YAMAHA bolt, YAMAHA bolt
In addition to the OEMSaddle Bag
The Bolt's rear blinker is located in a position where it easily interferes with the saddle bag attachment, making the choice of a saddle bag surprisingly difficult. By using this Relocation Kit, the interference between the blinker and the bag can be almost eliminated, and the selection of not only OEM products but also external saddle bags can be expanded to a large size. If you are having trouble choosing and installing a saddle bag because of the blinker, we recommend this kit. View detail
Fits: YAMAHA Bolt C Spec, YAMAHA bolt, YAMAHA bolt, YAMAHA bolt
Yamaha Turn Signal Relocation Kit
About quality and texture - Quality as usual with Yamaha is good. About the feeling of use - No issues. The turn Signals are easy to see and there is enough room for the Saddle Bags. Products to buy together - Nothing. Difficulty of installation - Installation is not hard, takes two to three hours. I took my time. You have to access the wireing harness, so the rear fender needs to be removed and then reinstalled. I like the way the rear fender looks on the Bolt and I did not want to use the Fender Eliminator Kit. I am glad this kit was available. Cost performance and comparison with other products - Reasonable. About shipping and packaging - Excellent. Any concerns, cautions, or advice when purchasing - None. View detail
Fits: YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, Others , YAMAHA SR400, YAMAHA XJR1300
I use Front and Rear Set.
I used to use CB71Type's small Blinker, but I felt uncomfortable with the small Blinker as I proceeded with OEM-like customization, so I decided to use this one which is used by OEM.
It's highly visible and has a 70's and 80's look to it.
good point
This is an OEM product, so the brackets are strong and durable.
Visibility is not a problem. No problem with visibility.
It looks like an 80's motorcycle.
It can be used not only for SR but also for XJR.
A bad point
The price is high. The price is high, but the product is good.
I think the initial model SR500 blinker was the same shape as this one…Square TypeBlinker but it has a classic look.
It is described as Universal, but it is a proper part because it is an OEM of Yamaha.
View detail
Fits: YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400
There is no Instruction Manual or anything like that.
If you remove the License Plate, you will find a similar part, so it is like replacing it with this one.
If you just want to install it, you can use 4 Small Bolts (License PlateQuantity:2pcBracketQuantity:2pc), but I have to disassemble the whole Rear Fender for wiring and Blinker removal.
I drilled a hole in the mudguard to get around the Wiring, as there was a good depression next to the Bolt that holds this Bracket in place.
You don't need to extend the wiring itself, and you can handle it as it is in NORMAL. (The Blinker's Wiring is pulled from the Coupler in the Wiring compartment behind the Tail Lamp, so there's no need to mess with the Wiring itself.)
There is a cutout in the mounting hole so that the Bracket on the base of the Blinker can fit in the wrong direction, so it is easy to fix the Blinker temporarily and check the direction.
It's a full normal car, so I don't know how to attach it to an external Fender etc.
View detail
It's a RALLY50 atmosphere!
My father-in-law's ToRacer 2017 with piaa Fog Lamp and Quantity:We installed it with the Set. The installation was left up to us from the order at a certain Large type nationwide ChainMotorcycle dealership, but we thought it would have been good to install it ourselves since it didn't seem to need any special processing. View detail
MT-09Tracer (15') Can be mounted on
Y's Gear is compatible with the MT-09 Tracer 900 or later, but the MT-09 Tracer (2015 model) I was able to install it without any problems at all in (from reliable sources) Case in point. (determined by the information of the). Fog Lamp of the specification product of PIAA is installed (it is pontooned to OptionHarness in Cowl, but it is high & hellip;), but the hole like Bolt hole is opened in Bracket, it seems that Other Brand Product may be attached depending on the device (self responsibility). As of now Camera of Drorecco has been installed in Mounting Bolt of Fog Lamp, inserting the Bracket of the letter L in between. View detail
I could use it to put on an external fog.
I bought it because it's an OEM fog bracket, so it was strong enough and seemed to be able to be installed reliably.
The fog itself is Yahoo! Chinese.
The size of the fog attachment area is almost the same as the OEMOption PIAA. Because the size was Size, Washer was the quantity:I added only 1pc. and installed it.
Parts that can be hung, so the strength of the OEMBracket is all you need.
View detail
Generally, I'm happy with it too …
I think it's a bit expensive! (Laughs)
The texture is also Matte-like, and although the colors are all available, it's a bit of a mystery to me hellip; …
I am satisfied with the overall quality of the product as it is made by the Manufacturer
View detail
ManufacturerOEM, but it's hard to install
The bracket can be perfectly fixed with the exclusive design of the car
Anyway, it's bright and easy to drive
I don't drive much at night, but I can feel the effects when I go into Tunnel
For safety reasons, I take falls all the time There may be pros and cons to this
Although there is a detailed instruction manual for installation, it is not as easy as it sounds It is difficult to install in some areas
LargePeople have difficulty with male fingers, so you may want to borrow a woman's or a child's hand for a Smooth It is not
It's just a bit expensive
You can buy it on Amazon or something like that as a Single Item for about the same amount of Gold Most importantly, you can't get an Exclusive Design Bracket
Meekly this Quantity:It is recommended that you purchase a Set and pay for the labor to have it attached to the shop
View detail
Fits: YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400
Is good
Can be installed without modification
The Blinker no longer interferes with the side bag, making it easier to use
You'll have to work on the Fender inside out, which can be a bit of a challenge if you're on your own
As others have noted in their imprints, the Instruction Manual has little to say about There is no written procedure, so that's my complaint
View detail
Fits: YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400
I put it on for now
For some reason, the direction of Blinker became up 45 degrees diagonally Shield, you need to be careful when dealing with Wiring I'll remove the Tandem seat, but I'll have to temporarily fix the Bolt back in its original position to get the Fender Inner falls off View detail
It is a wonderful item. The price is high (; _ : )
Depart before sun rises, arrive at your destination at AM 7 o'clock, arrive at the return home after eating local breakfast, and enjoy Touring at the Style where you will return home by 2 PM at the latest. (Then Family Service)
For this reason, but I often pass through the mountain road just at night, with absolutely no mountain road of street lights "One by one is darkness" I was scared of the situation and decided to purchase.
At the beginning A AZ ○ N thought about cheap fog selling at N, but I felt uneasy about footing and reliability (important) Purchasing daringly with the desire to introduce high ones.
I am impressed with high precision about Footing.
I feel the brightness of lighting as PIAA!. Late night & heavy rain & no street light & used under bad condition of mountain road, we could drive safely. It was expensive but I'm glad I bought it.
Digression : It was surprisingly surprising that it was interrupted in the front.
View detail
Contributing to Dress-up.
Purchased from OEM's Silver ring for Makeover. HeadlightBody is shiny Black, why Ring Matte Black. Also high price. But there are no other choices. View detail
Take - - - -
OEM Parts So it can not be helped?
If you buy a bolt, the first thing you do not do is to paint Black in the cheap Silver Painting part.
And then crushing Plating.
Among them, the visual effect is amazing because it is the largest Large Plating parts.
However, it is expensive.
It is high monster.
Because OEM has rusted itself, I can not help it without it,
Even if I paint to Plating, it will be peeled so it can not be helped I purchased it with implications.
Every time I saw the car body by replacing the parts, it was okay with this and further suggestion that it was good
I am mad.
Oh, I want to exchange it with Seat of CSpecifications.
View detail
Great.
I bought SEROW, but I just purchased Fog Lamp because I could not do much night driving with Headlight alone.
The impression attached was satisfactory.
View detail
Matte Black
Headlight Ring of the original OEM was exchanged for this Ring because the quality of Plating was poor and the inside was rusted within six months from the time of new car.
As expected, texture is good as Matte black paint film as OEMO option goods. Light case is glossy black, so if you want greed, it was better for one who had gloss with one glance but it is satisfying because this feeling became Classic like this privately.
I did not have much difficulty in installation, but since optical axis adjustment Bolt sandwiched Spring with Plus screw, I think it would be better to loosen and tighten by pushing carefully while pushing my head carefully as it is hard for Small Driver. Do not forget to adjust the optical axis when tightening.
I think that it is expensive to have more than 8,000 yen in the Headlight Ring, but if you would like to change the image of the face with glitter, I think that it is a satisfactory product.
View detail
Fits: YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, Others , YAMAHA SR400, YAMAHA XJR1300
Since the car body was a Silver, it becomes the shapely tightened Image and is very more satisfactory than the black/Orange of until pure. Attachment was completed without also carrying out end processing of wiring and processing anything. It is time re
Since the car body was a Silver, it becomes the shapely tightened Image and is very more satisfactory than the black/Orange of until pure. Attachment was completed without also carrying out end processing of wiring and processing anything. It is time required 10 minutes. View detail
Fits: YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400
Not too bad. It is satisfactory for attachment or the product in particular itself. When attaching by oneself, in order to work Rear fender outside carrying out, it was fairly serious, but the blog etc. were made by referring to it. [ ] Since
Not too bad.
It is satisfactory for attachment or the product in particular itself.
When attaching by oneself, in order to work Rear fender outside carrying out, it was fairly serious, but the blog etc. were made by referring to it. [
]
Since only the thing of the grade which removes a Blinker and it attaches to a Stay is written to the
operation manual, it thinks that the point is unkind and reduces one *.
View detail