Reviews
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA
ODAX Daylight Kit
It is ideal for Touring. It is easy to see from quite a distance. The installation was a bit odd for Large, since I also installed the ON-OFFSwitch and Relay, so it was a bit odd for an amateur. View detail
ODAXBack fog
I like the way it looks! View detail
Not bright.
Blinker on moped is now LED.
The brightness was dimmer than the bulbs and did not make sense.
However, the power consumption became smaller, so I think it was effective there.
View detail
No parts are included. (Wiring)
The Instruction Manual included color images of the product contents. is theQuantity:Pair (for Left and Right) When I tried to replace the Relay with an LED Bulb, it did not include the conversion Wiring from the OEM.
The Instruction Manual has a Wiring image connected to Relay but it is not included. I am currently in a High flasher state and have stopped working on it.
Please respond as soon as possible.
View detail
work stoppage
I purchased the Front and Rear ODAX products, but the Relay Conversion Wiring, which must be included on the Front side, is not included, so my work has been suspended.
I had trouble finding the Wiring image connected to Relay in the Instruction Manual.
View detail
[webiku] RIA attached to the monitor zoomer (ruckus) felt it refreshed.
[webiku] RIA attached to the monitor zoomer (ruckus) felt it refreshed. View detail
Valve replacement along with Headlight
Originally, the GSR750's Position lampCover was Blue, so the
Select Blue this time
The Forme is brighter than I expected and I am personally satisfied with the Forme.
Please note that the LEDs have polarity and will not light up if they are attached in opposite directions.
View detail
Now you're safe.
I did not understand the standard of the Valve of Blinker properly, and when I converted to LED 4 years ago, I was forced to install the G18 Valve. The car passed the inspection, but I felt that the light intensity was not so good.
Recently I became really curious about it and found this in search of S25 Valve, the official standard.
Since the body of the Blinker was the full length of the S25 standard Limit, this product, which emphasizes compactness, is the best match. The light intensity was also sufficient.
View detail
bright
The white color is nice and bright when replaced with the yellowish color of the NORMAL.
Since it is LED, it is expected to be durable and will last for a long time.
View detail
It's cool
I bought the ZX14R Tail lamp because it looks like White and my body is White, so the back view is flimsy and not good enough.
I considered the BEET Cover, but I thought that a bright black tail lamp on a white car body would be different, so I dropped it from my list.
The result is just the right amount of Black for me personally, and I am Large satisfied.
The LEDs glow beautifully.
I love that Blinker also has one of theirs and can make it the same color!
One area of concern is that the chili does not match.
It is unfortunate that the upper side of the Lamp is a little higher than the Cowl...
View detail
Inexpensive LED conversion of Blinker
[How is it used?
When replacing the Blinker with the Other Brand Product, I decided to use LEDs anyway and installed them.
Was the one you received as per Image?
The product description says "Orange", but the product label says "Color:Yellow (or more accurately, Orange with a strong Yellow tinge)
Was the installation difficult?
No different than installing a regular light bulb.
How was your experience with it?
Satisfied with LED-like sharp blinking, no difference in brightness between bulb and large.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
I would have liked a more solid Orange color.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Blinker relay is LED-compatible; wiring is required if the Blinker indicator lamp is a single light.
View detail
Required processing
The size of the aluminum material imported from large land was not suitable for the front side of R1, so it needed to be processed.
I bought it with a faint hope that I might be able to wear it Exactly. I bought it with faint hopes that it might be possible to install Exactly.
As a result, the Size does not fit on the front side of this product as well.
It is one size larger than the for Blinker hole in the Cowl.
However, this product is Material:Plastic is easy to process.
I was able to fit it after shaving the whole thing down and making it one size smaller.
I would like to install it without any modification if possible. If you can do it yourself, this is a good part because it is inexpensive.
View detail
It went out fast.
I replaced the Valve on the Blinker and it cut out after 1 day of actual work. View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3, YAMAHA YZF-R3
It works without any problems!
I bought it because NORMAL Design is terrible.
Installation is easy
It's just that it's smaller than I thought it would be.
It may be a little hard to see from the front, but the brightness of the LEDs works just fine!
View detail
Brightness with presence
The brightness and whiteness are completely different from the NORMAL position bulb. It is the brightness with a sense of existence, and it becomes the safety improvement regardless of day and night. View detail
Very good. There's nothing wrong with it.
I bought this to convert my SL90 to 12V.
Quality, light output, color, price all good!
I think I will buy LED bulbs from this manufacturer from next time.
View detail
Fits: KAWASAKI ZX-14, KAWASAKI ZX-14R, KAWASAKI ZZR1400
It's bright and snappy.
[How is it used?
One week after installation.
Was the one you received as per Image?
Just like the picture of the product.
Was the installation difficult?
I think it's easy if you have experience removing and installing Cowl.
How was your experience with it?
Originally I didn't plan to use LEDs, but I got the Blinker lens. [Color] The introduction of the Smoke makes it darker than expected when lit.
The result is a bright, crisp flashing light with improved visibility.
[Included Parts:were they on?
sufficient
[Was there anything that disappointed you?
Two points for me.
When I replaced the Relay, I turned the Relay body 90-degrees and tied it with a Tie Wrap because I thought it would be too much for the wiring if I installed it the same way as the OEM because the Relay body is larger and the wiring is longer.
The fact that it now responds with a slight delay after pressing the Blinker switch.
I'm just a little concerned about both of them.
View detail
Fits: SUZUKI BANDIT1250F, SUZUKI GSX-S750, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI V-Strom1000, SUZUKI SV650, SUZUKI SV650 X
The blackened version is very beautiful!
My motorcycle originally came with a yellow turn signal cover, which feels too rustic. After I bought this blackened turn signal cover on Webike and installed it, it feels much better, and it fits perfectly! Excellent workmanship! Remind everyone, use screws to unscrew the screw holes of the new cover before installation, it will be much easier to install! ---------------------------------------------- My motorcycle originally came with a yellow turn signal cover. I feel that the original turn signal cover is not good-looking. So I bought this blackened turn signal cover on Webike. This turn signal cover feels much better than originally turn signal cover, and it fits perfectly! The workmanship is great! I would like to remind everyone that before installation, use screws to unscrew the screw holes of the new cover. This will make the installation a lot easier! Powered by Google Translator View detail
Fits: SUZUKI BANDIT1250F, SUZUKI GSX-S750, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI V-Strom1000, SUZUKI SV650, SUZUKI SV650 X
I'm so sorry!
I proceeded with the purchase, confirming the request, but unfortunately it didn't fit. 。 He gave a detailed explanation and gave up.
Thank you for your kind explanation and support.
View detail
Tension bombing at night for sure!
OEMTail lamp of ZX14R is [Color] The front of the bike was more white than clear, and the difference between the front's cool look and the rear's cheesy clear tail was amazing. [ODAX ODAX LED Tail Lamp] We have purchased the
Installation
Tail lamp installation itself is easy even for a beginner!
All you have to do is remove the Screw and replace the Coupler, so it's not too difficult.
……But there is a Screw in a very narrow place, so you have to work hard.
[Quality, texture, visibility
There is not a single defective LED on the Smoked lens, and it shines brightly.
If you see it at night rather than during the day, your Tension is sure to explode!
It's one of those things that happens when you change the lighting system, you change the tail lamp and it's like the whole motorcycle is new!
I was expecting the visibility to be darker than OEM because of the Smoked lens, but that was not the case.
It's rather brighter and more dazzling than OEM.
Conclusion
I think it's better to buy this one from the beginning if you're going to have a painful experience with a cheap no-name manufacturer's product. (Because the hassle of replacing and purchasing is dull)
By the way, I bought a very cheap no-name Manufacturer's Tail lamp once and it hurt me……lol
View detail