Reviews
Fits: HONDA CROSS CUB50, HONDA SUPER CUB 50, HONDA SUPER CUB 50PRO, HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB110PRO, HONDA SUPER CUB110PRO
Super Cub custom standard!
I have been searching various mail order sites and I think they are the cheapest and the best quality. My CUB was a little bit cheap, but I just replaced the Lens with a new one, and it gave me a more drilled style. View detail
Fits: HONDA Integra750, HONDA NC750X, HONDA NC750X, HONDA NC750S, HONDA NC750S, HONDA NC700X, HONDA NC700S, HONDA CB650F, HONDA CBR650F, HONDA 400X, HONDA 400X, HONDA CB400F (2013-), HONDA CBR400R (2013-), HONDA CBR400R (2013-), HONDA CRF250L, HONDA glom, HONDA glom, HONDA GROM, HONDA GROM
The high impact of the large original blinkers is removed
About quality and texture, I can confirm that the quality is great and that the material used is for the lenses is PMMA (polymethylmethacrylate) with a clear finish and the bulbs are glass with a plated finish. About the feeling of use, By removing the bright orange lenses and replacing them with the clear lenses, the high impact of the large original blinkers is removed while still having the same desired effect as the original blinkers when in operation but they now have a custom look. Products to buy together, While working on making the original blinkers look nicer I would take advantage of this to also add a clear tail light to your cart to also help tidy up the rear of the bike. Difficulty of installation, I can say the fitment of the lenses for my installation was very easy due to the simplistic design of how the lenses secure to the blinkers housing with a clip and a screw just as the original ones do. Cost performance and comparison with other products, The pricing of the product is great. You receive a full set of lenses and bulbs that are of great quality. The pricing of other clear lenses sets available are higher but if you like the smoked lenses then these can be purchased cheaper from Kitaco. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Fits: HONDA Rebel 250, HONDA 400X, HONDA 400X, HONDA 400X, HONDA CB400F, HONDA CB650F, HONDA CBR400R, HONDA CBR400R, HONDA CBR650F, HONDA CRF250L, HONDA CRF250L, HONDA CRF250M, HONDA CRF250M, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA INTEGRA, HONDA NC700S, HONDA NC700X
Still having the same desired effect as the original blinkers when in operation but they now have a custom look
About quality and texture, I can confirm that the quality is great and that the material used is for the lenses is PMMA (polymethylmethacrylate) with a clear finish and the bulbs are glass with an amber tint. About the feeling of use, By removing the bright orange lenses and replacing them with the clear lenses, the high impact of the large original blinkers is removed while still having the same desired effect as the original blinkers when in operation but they now have a custom look. Products to buy together, While working on making the original blinkers look nicer I would take advantage of this to also add a fender eliminator to your cart to also help tidy up the rear of the bike. Difficulty of installation, I can say the fitment of the lenses for my installation was very easy due to the simplistic design of how the lenses secure to the blinkers housing with a clip and a screw just as the original ones do. Cost performance and comparison with other products, The pricing of the product is great. You receive a full set of lenses and bulbs that are of great quality. The pricing of other clear lenses sets available are much higher but if you like the smoked lenses then these can be purchased slightly cheaper from Kitaco. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Fits: HONDA CROSS CUB50, HONDA SUPER CUB 50, HONDA SUPER CUB 50PRO, HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB110PRO, HONDA SUPER CUB110PRO
Appearance Refreshing
I am not comfortable with the color of OEMLens, so I chose this Type, which shows an Amber-colored Valve in a transparent Lens, and I like it because it is elegant. View detail
Fits: HONDA VTR250, HONDA VTR250 typeLD, HONDA VTR250-F, HONDA CB400SB, HONDA CB400SF
Tailored to Tail [Color] Clearly.
I bought this product because I trusted that it was made by Endurance, but the Front Right Side was the only one that did not fit properly, even though the others were installed perfectly. I tried various ways and found that the molding of the screw part was not correct. I thought about returning it, but I managed to attach it by modifying it with File, but it still seems to be slightly floating.
This product is not recommended.
View detail
Fits: HONDA CROSS CUB50, HONDA SUPER CUB 50, HONDA SUPER CUB 50PRO, HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB110PRO, HONDA SUPER CUB110PRO
JA59. Quite an impression change.
[How is it used?
CUB Dress-up
Was the one you received as per Image?
Image Street
Was the installation difficult?
One Phillips Screwdriver is all you need
How was your experience with it?
The CUB has been tightened up, looking better while retaining the Retro feel of the CUB.
[Included Parts:were they on?
Lens and Valve only. Instruction Manual was a type that reads QR.
[Was there anything that disappointed you?
nothing special
Lens. [Color] If you want to use Smoke, Valve's Amber with Color is about 1,400 yen cheaper than Plating, and the orange color that is faintly visible is cool. Installation takes about 10 minutes. For both the rear and front blinkers, remove the bottom screw and turn the coupler to the Left to remove the Lens, and the ball can also be removed by lightly pushing it in and turning it to the Left. Installation is the reverse procedure.
The Smoked lens on the Tail is from KITACO (about 2600 yen on amazon).
View detail
Fits: HONDA VTR250 typeLD, HONDA VTR250-F, HONDA VTR250, HONDA CB400SF, HONDA CB400SB
It was easy to immeChain!
The OEM Orange blinker lens is not bad, but there was something that made me feel a bit old-fashioned, so I bought this product to replace the blinker lens for a change.
This time I chose a combination of Clear Lens and Plating bulbs, and I thought about using Amber bulbs, but with Clear Lens, the Amber color (Orange) is very clearly visible! When not lit, the Orange color is gone from the entire body of the car, making it look much tighter.
It is a PetitCustomization that simply replaces the Lens and bulbs, but I am glad I did that because it changes the atmosphere quite a bit. I recommend it to those who want to easily imeChain!
(Since it's just a replacement of Lens and bulbs, you can always change it back to the original state if you change your mind … By the way, I have Smoked lens and Amber bulb Quantities.:Set was purchased at the same time. I may want to make it look different again, and it was going to be out of Manufacture stock…)
Also, Lens packing is purchased and replaced at the same time. If it has never been replaced, it is recommended that it be purchased with the Lens, as it can deteriorate or break off when removed.
View detail
Fits: HONDA VTR250, HONDA VTR250 typeLD, HONDA VTR250-F, HONDA CB400SB, HONDA CB400SF
Easily makes a SMART impression.
The CB400 Blinker looked a little retro and did not match the HALF COWL of the SUPER BOLDOR. Also, I wanted to match it with the new Clear Tail lamp cover, so I decided to change to this Lens.
This time it was installed on a 2BL-NC42.
The shape of the screw part is different between the rear and the front, and the rear can be installed without modification, but the front needs to be cut down a little. 5mm of cutting with a nipper or cutter will allow installation without modification.
The photo shows one side with only one of them on to show the difference in impression.
It looks like it fits well with the Image of 2BL-NC42, and it is easy to see the difference between when the Blinker is on and when it is not.
I was going to replace it with a slimmer Blinker like the CB1300 OEM, but I am happy with it.
View detail
Fits: HONDA VTR250 typeLD, HONDA VTR250-F, HONDA VTR250, HONDA CB400SF, HONDA CB400SB
Easy Ime-Chain
It is not LED or flowing Type, but I like it.
[Color] I was worried about Smoke, but I decided to go with Tail lamp. [Color] Clear.
It's a casual customization that goes unnoticed if you don't say it lol.
View detail
Fits: HONDA CB400SB, HONDA CB400SF, HONDA VTR250 typeLD, HONDA VTR250-F, HONDA VTR250
pretty good product
The Front requires some modification, but I think it is well built for the price. View detail
Fits: HONDA CROSS CUB50, HONDA SUPER CUB 50, HONDA SUPER CUB 50PRO, HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB110PRO, HONDA SUPER CUB110PRO
Doesn't fit a 22 year old super curve
First of all, I paid for the delivery in 2-3 days, but it arrived in 13 days. The delivery is slow and the blinker in question says that all the super curves of the previous year can be installed in the manual.
I have to process it to install it on a 22-year-old Super Cub.
The lens inside doesn't fit either --------------------------------------------- ------------- Once the shipping was paid for two or three days, the arrival arrived in 13 days. To do it, I have to process it.
The lens inside is not right. Powered by Google Translator
View detail
Fits: HONDA VTR-F, HONDA CB400 SUPER BOL D'OR, HONDA CB400 SUPER FOUR, HONDA VTR250, HONDA VTR250, HONDA VTR-F, HONDA VTR TypeLD
Mounted on cb400sb NC42
The Lens has a protrusion on the bridge, but one of the shapes did not fit, so it was cut out with a nipper.
I don't know if it's just a coincidence.
I'm glad the colors were tightened up.
View detail
Fits: HONDA VTR250, HONDA VTR250 typeLD, HONDA VTR250-F, HONDA CB400SB, HONDA CB400SF
Wrong light bulbs for my bike
I have a 2015 CB400SF the light bulbs in in the front of my bike a single filament. This kit had dual filament bulbs for run and turn function so I was not able to use them. But I did find some suitable at my local hardware store. View detail
Fits: HONDA Rebel 250, HONDA 400X, HONDA 400X, HONDA 400X, HONDA CB400F, HONDA CB650F, HONDA CBR400R, HONDA CBR400R, HONDA CBR650F, HONDA CRF250L, HONDA CRF250L, HONDA CRF250M, HONDA CRF250M, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA INTEGRA, HONDA NC700S, HONDA NC700X
Accuracy!
[How is it used?
FOR JAPAN MODELMODEL's JC92 Grom was installed by ImeChain.
ThailandMODEL is a product of Standard Equipment. [Color] It's a ClearSmoked lens.
I envy you, W.
(Wheel is also Gold.)
Was the one you received as per Image?
The finish is even more beautiful than the Image.
Was the installation difficult?
It is finished with high precision and is easy to install.
The only tool used is a Phillips Screwdriver 1 pc.
(Attach the attached collar from the bottom.)
How was your experience with it?
I am personally satisfied with Large.
[Included Parts:were they on?
Instruction Manual and the necessary colors for installation were available.
[Was there anything that disappointed you?
It's a rather inexpensive product.
If I may be so extravagant, it would be nice to have a Sticker or something like that. (^_^)
View detail
Fits: HONDA VTR250, HONDA VTR250 typeLD, HONDA VTR250-F, HONDA CB400SB, HONDA CB400SF
Everything is perfect!
16 years old cb400sf nc42
I've installed it on!
The whole thing could be pimped out with no gaps and no modifications!
WinterLens [Color] It's nice to have a different vibe with all that Clearing!
The unevenness on the screw part of the Lens.
Quantity:Pair (for Left and Right) Just check and install it.
It takes about 10 minutes to exchange ^_^.
View detail
Fits: HONDA CB400SB, HONDA CB400SF, HONDA VTR250 typeLD, HONDA VTR250-F, HONDA VTR250
Good
The body of the car is black [Color] I bought Smoke because I thought it would look good on me.
I thought about LED etc., but I thought that it was easy first of all rather than changing High flasher measures and Wiring, and made Smoked lens exchange.
I loved how tight it looked.
View detail
Fits: HONDA CROSS CUB50, HONDA SUPER CUB 50, HONDA SUPER CUB 50PRO, HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB110PRO, HONDA SUPER CUB110PRO
How's the visibility?
OEM=Yellow Colored Lens, White Glowing Light Bulb, by this product
You can change to transparent lens or yellow light bulb.
How is the visibility in bright places?
If you look at the glowing state in a bright Are you sure you're seeing this right?" I'm a little worried.
I wish I could ask the car behind me what I thought of it …
Completely personal taste. (Whether you can forgive Yellow colored Lens or not) Items in the
View detail
Fits: HONDA VTR-F, HONDA CB400 SUPER BOL D'OR, HONDA CB400 SUPER FOUR, HONDA VTR250, HONDA VTR250, HONDA VTR-F, HONDA VTR TypeLD
It is quite good.
I installed it on my 2021 CB400SF.
The angle of the notch on the front side of the bolt is not quite right, so I had to do some simple modification (pinch it with Pliers, tear it off and adjust it with File). the angle of the notch on the rear side is OK.
And I made a female screw with Tap (M4) just in case the hole for Bolt stopper is broken.
There is no mention of the above in the instruction manual, so please refer to it.
The amount of light falls a little compared with NORMAL, but I think that it is not a problem. I do not know whether it is OK at the time of the car inspection.
It's pretty good Parenthesis!
View detail
Fits: HONDA CROSS CUB50, HONDA SUPER CUB 50, HONDA SUPER CUB 50PRO, HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB110PRO, HONDA SUPER CUB110PRO
Good looks
Clear Lens + Mimic ValveSpec. for a clean look.
And the stop-lamp. [Color] Clear? [Color] Makes me want to Smoke!
View detail
Fits: HONDA CB400SB, HONDA CB400SF, HONDA VTR250 typeLD, HONDA VTR250-F, HONDA VTR250
Good quality and cosmetic.
I was torn between Clear Lens and [Color] Smoke
The good thing about this product is that before and afterQuantity:Pair (for Left and Right) Quantity:This price is for 1 Set of 4pcs.
It is not a messy construction and can be used normally.
Different Manufacturer's products are sold in front and back Rose, and the price is doubled!
The installation went without a problem.
Since there is no screw cutout in the Screw hole, it is recommended to insert the Screw before installation.
It was easy to install
Packing is not included, so you will have to use the original one. Let's not lose it ♪
View detail