Reviews
It is easy to install.!
OEMHalogen was replaced because it was too dark.
Installation is a simple matter of removing and replacing the OEM. I did a test run during the daytime, and it was a little brighter in the Tunnel. I don't drive much at night, so no problem! I don't drive much at night, so no problem! I don't know about durability, but I'm happy with JAPAN, it's well made and looks good.
View detail
Lack of good product Level is low.
Used on a SEA BASS VST 650. I tried riding at night with it on, but it was dark. It is just too dark. Also, the optical axis is a little bit off. So, when I adjust it to the lower side, the difference of optical axis between high beam and low beam is very different. PIAA or Ray Brick (Stanley) I would not recommend purchasing anything other than the 2-wheel dedicated LEDs from I think the next best choice would be SYGN HOUSE. By the way, I have purchased SYGN HOUSE twice in the past, but the low beam ran out after about 1.5 years. I hope this will help you in your purchase. View detail
Headlight LED
Easy to install on GSX400.
No processing is required.
It is considerably brighter.
View detail
It started blinking at 4 months.
I like the brightness and color of the Position itself.
I am sorry to say that it was not too durable.
View detail
I'm satisfied
Installation is easy, as all I have to do is replace it. I am satisfied with the amount of light. I am glad I made the change. View detail
BAREN Mirror Tea LED Headlight Bulb for Increased Light Intensity
In recent years, LED headlight bulbs have improved in performance and production costs have stabilized, resulting in an increasing number of inexpensive products that are fully compliant with vehicle inspections.
I don't drive at night, but I installed a LED bulb with a large light intensity to increase visibility and safety for touring and other activities.
The BAREN Mirror Tin LEDHeadRCSeries was compared to DAYTONAPrecious Ray, SphereLight, and DeltaDirect.
The deciding factors were the high quality for the price and the total luminous flux:Hi 1300lm./Low 1000lm、Color Temperature:In addition to being 6000K and Japanese Vehicle Inspection Correspondence, it is waterproof, dustproof, and exclusively for Japanese cars.
After installing them on the car body, we were impressed with the dramatic difference in color temperature and sufficient brightness as we had hoped.
View detail
Fits: HONDA GYRO CANOPY, HONDA Byte, HONDA MAGNA50, HONDA BENLY50CD50, HONDA ZOOMER, HONDA DREAM50, HONDA ZOOMERX
Hmmm... It's so expensive.
Used for square eye CUB90Custom HA02-180 units.
Replacement for Halogen 30/30W from Pine Stripe. (Light lens is OEM)
It is very easy to use.
The result was, hmmm. Did it lighten up a bit? Did it just get WHITER?
Perhaps it is because the bulbs were replaced with Halogen bulbs rather than white bulbs, but I don't feel a dramatic brightness.
This is to be expected, but I can't see well on wet surfaces, I have to check Switch to see if Light is on.
After all, 6000Kelvin is too WHITE for this level of brightness.
The worst part is light distribution.
If it is illuminated in a fan shape, there is no problem, but it is an inverted V cut~state. It is hard to see pedestrians on the dark night road.
In addition, the center of the image is blurry and dark, and the vision is lacking. It is likely to catch feces or frogs on the country road.
The Up eye is almost unusable.
The low simultaneous light system is not a light system, so it only illuminates the top and may attract cats and dogs.
It's a shame that it even comes with a 2-year warranty.
View detail
Affordable and easy to install.
[How is it used?
OEM I just wish it would lighten up just a little bit more." When I tried to replace the Headlight Bulb that looked like a The price of LED Headlight is getting Reasonable these days..." That's why I bought this product.
Was the one you received as per Image?
It was a little larger than I had expected, but I didn't mind, because the SEROW & XG250 TRICKER are old-fashioned headlights that refract light on the Glass Lens side, so Valve's design is not visible.
Was the installation difficult?
It is not a type with large cooling fins, ballast, or special wiring like the LED headlight bulbs of a while ago, so those who have replaced the valve of a normal Halogen headlight can replace it without any problem.
How was your experience with it?
Once installed, they are treated like Halogen head lamps, just like they were when they first came out. It's a little dark when you just turn it on." There is almost no discomfort.
Furthermore, as mentioned above, the headlight of the SEROW & XG250 TRICKER is a traditional headlight with a diffuse refraction on the Glass Lens side. The light diffusion is wrong." There is no discomfort in the illuminated area when driving at night without any obstruction.
[Included Parts:were they on?
There is nothing in the HeadlightBody other than a simple Instruction Manual enclosed.
[Was there anything that disappointed you?
It seems brighter than the OEM product HalogenHeadValve (although there may be some illusions because the light has changed from orange to white), and I can drive more safely at night than before.
All you have to do is replace the Valve." I think it is enough to make such a difference in the products of the company.
Since the exchange. Driving at night when it rains." has not been implemented, so I will refrain from providing a Review of that area.
Other items that would be helpful
Point and hang of installation
None in particular, depending on the type of car. Until the headlight lens bulb is removed. may be more difficult.
[Availability and clarity of the Instruction Manual
A simple Instruction Manual is enclosed, so those who have experience in Headlight Bulb replacement should have no problem. If you don't understand the instructions on the back of the box or in the instruction manual, don't bother. A good friend or PRO." Ask the
[ITEMS TO BUY TOGETHER
Not particularly
[Opinions and requests to Manufacturer
I appreciate the easy-to-afford pricing.
View detail
Recommendation to the vehicle with no Space behind Valve.
I chose this one because it can be installed without modification because modification of covers can cause problems due to dust and water intrusion. The brightness is also sufficient. View detail
Beautiful LED colors.
OEMs do not light up every nook and cranny of the Lens for Valve one, though.
This product shines beautifully.
I am satisfied with the replacement.
View detail
BAREN Mirror Ti G18Double Pin Angle 180°
The price was high, but the product was as expected. View detail
Jewel LED Tail Lamp
It's a good idea to have a copy of the instruction manual in case you're not sure how to use it. View detail
It shines beautifully and brightly.
[How is it used?
I bought this to convert my JC92 Grom Blinker to LED!
Was the one you received as per Image?
It's even brighter and more beautiful than the Image!
How was your experience with it?
No problems with installation or lighting.
[Points to note]
None, but you'll need an LED-enabled Relay
How did it compare to other products?
I was under the impression that the cheap ones didn't have a good reputation, so I was excited
You were right.
View detail
Convincing beauty
[How is it used?
I use it for city riding and day touring.
Was the one you received as per Image?
It's a beautiful finish and beautiful bright light, even better than Image!
How was your experience with it?
Installed with no problems, very happy with it!
[Points to note]
Not particularly, but you'll need a Relay that supports LEDs!
How did it compare to other products?
There are a lot of cheap ones out there, but I wanted something that would be safe, so I was excited!
View detail
risk of success
I thought that it was good because it emitted light in the same direction as a white light bulb, and I bought it, but it began to flicker in less than one month. I judged that it was a defect of this product.
It's a pity because I trusted Valenti's other LED bulbs because they have good and stable light output.
View detail
Fits: HONDA CB250F, HONDA CBR125R, HONDA CBR250R
Cosmetically, it's pricey, but it's satisfying.
I installed the Smoked lens thing to change the bulb type Tail lamp of 14 years old MC41 CBR250R latter term to LED.
The Valenti Tail lamp is a MAJOR item in the four-wheeled category, and the MC41 has the V-shaped LED array of POSH, KIJIMA, Endurance, etc. I wanted a different design, so I chose this product.
It should be noted that this product has a Sequential Blinker feature and a BrakeFLUSH feature (A function that flashes three times fast when Brake is applied) However, please note that the use of these products will result in non-conformity with the safety standards.
The Blinker function can be used as a normal tail lamp if not wired, and the BrakeFLUSH function is turned off by default.
The Package is as high quality as the Image, and the product itself has a very deep Reflector and a beautiful Lens surface that exceeds the expectations shown in the Image.
Although Wiring with the resistor to use the LED Blinker function without changing Instruction Manual and Relay which described a relatively kind installation and the setting method was bundled as the bundled thing, I do not use it because I have exchanged Relay for the thing corresponding to LED. It was not used.
The installation itself is almost a Couplet-on, and if you are able to detach the cowl, you should have no problem if you follow the Instruction Manual, but be careful because the nail of the TailCenter cowl is easily broken.
It is the first impression which tried to install it in the car body, but as for the appearance, it is Parenthesis good without saying, but the dimension seems to be slightly small overall as well as the Tail lamp unit made by other manufacturers, and the gap with Cowl is slightly concerned. (Mounting hole position is Exactly)
I'm going to put some urethane or something on the inside of the cowl and the outside of the tail lamp unit to make it less noticeable.
It is a feeling of use, but as a Tail Stop-lamp, it is the height of the visibility that it is a quintessential LED with a perfect brightness and light quantity change in spite of Smoked lens.
As for the sequential blinker function, I added a circuit to split the OEMBlinkerWiring and add a Locker Switch to switch between using OEMBlinker and OEMBlinker only, depending on the situation.
The light itself is more visible than I thought it would be, and I think it's less likely to be misinterpreted by following vehicles than a simple flashing light.
As for the BrakeFLUSH function, every time the brake is applied, the ChicaChica flashes at high speed, which I honestly think is annoying for following cars.
In addition, the ON-OFF of the sequential function of Blinker where the Grommet of BodyRear is removed. (The Blinker function itself cannot be turned off) and the ON-OFF switch button for the BrakeFLUSH function, so you can set it to your liking. It is possible to switch easily even if it is installed in the car body. (De Fault setting is sequential ON and FLUSHOFF)
I would like to give it a perfect score, but the only thing I regret is that the gap between the Cowl and me is very slight.
If you like it, you'd better hurry up or you won't be able to get it anymore…
View detail
Fits: Others NV350Caravan, etc., Others 200 Series High ace
Satisfactory product
It is a second purchase. It gives a very luxurious white light. It is similar to genuine bulb, so it is safe for inspection. I will continue to buy from now on. I like the low price very much. View detail
Fits: Others NV350Caravan, etc., Others 200 Series High ace
It is a good product.
I used this product in my previous car, and I was satisfied. I bought the car again and ordered it again. Luxurious white light. The amount of light was also satisfactory, and the car was passed without any problems even when it was inspected. View detail