Reviews
The base is rubber, making it difficult to install depending on the car model.
Root is Material:The more I tighten the Bolt for Rubber, the more it shrinks, and I don't know how much to tighten.
I tried to put it on a VMAX1200, but I also have Shield on the vehicle.
The VMAX1200 Shield is often installed together with the hole for the blinker, so when the Bolt is tightened to secure the Shield, the Rubber sinks into the Shield and cannot be securely fastened.
In the end, I managed to attach it after processing, but I thought that the material of each part should also be clearly stated in the product description.
View detail
I like the product but it did not pass inspection.
I recently had my car inspected and the inspector was detailed and diligent.
It did not pass inspection. I had to change it back to NORMAL to get it inspected.
There are some who have attended.
It's a shame
The reason was that the Position light was OK, but the Brake light did not have enough light area to pass the inspection.
By the way, I was meticulously measured by MAJOR.
View detail
Fits: KAWASAKI Zephyr χ, KAWASAKI Zephyr 750 RS, KAWASAKI Zephyr 750, KAWASAKI Zephyr 110, KAWASAKI Zephyr 110 RS, KAWASAKI ZRXII, KAWASAKI Zephyr 400
That's not the picture
It looks shiny in the photo, but the actual product is dull. View detail
Fits: HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB70, HONDA SUPER CUB 50Custom, HONDA SUPER CUB 50
Accuracy is not as good as it is cheap
I bought them because they had become cloudy and cracked over time, but the edges of the lenses were too thick to wear as they were.
I managed to get in by thinning the edges with Leutor, but I think it will start to crack with UV rays in 3 or 4 years.
View detail
The lowBeam is so dark.
It's so dark that you might think that the lights are not on when driving at night or when driving on the Tunnel. It is so dark. However, High beam is very bright. It is very useful for DRZ400sm which is difficult to pass the inspection with LightTester. I didn't imagine it would be so dark, maybe OEM Lens is bad, but High beam is so bright. This is the worst of the cost. View detail
Fits: HONDA Ape 100 Type D, HONDA Ape Type D, HONDA Ape 100, HONDA Ape 50, HONDA monkey, HONDA Ape 100 Type D, HONDA Ape Type D, HONDA Ape 100, HONDA Ape 50, HONDA monkey
Wiring's Crimp is too sweet.
The quality of the wiring is so good that it looks like it is about to be ripped off. Even if it is this price, this quality is terrible indeed.
On the contrary, if you can fix it by yourself, it may be suitable for those who need a cheap Tail Lamp anyway.
View detail
It was Yellow Bulb.
It is worth the price. Not bad, but it had a Yellow Bulb.
I don't care if it's Yellow, Purple, Pink, Brown, or Black. No, I don't like Black. I cannot see.
I wish I had specified it correctly. I can't believe they sell this stuff on Webig! I had to check three times to see if it came from Amazon.
View detail
Material is not good.
The Material is Plastic and Plating is very poor. If it was at least Steel, I would not have complained. View detail
Fits: HONDA SUPER CUB 50PRO, HONDA SUPER CUB 50, HONDA CROSS CUB50, HONDA SUPER CUB110PRO, HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA SUPER CUB110, HONDA CROSSCUB110
Very difficult to install. Looks great.
Installed on SUPER CUB110PRO.
Not only the wiring, but also the removal of the carrier and suspension, and the bending of the product plate Gold are required when installing on the PRO.
Wiring process requires ingenuity because OEM Harness is very short.
And as for the plate Gold process, I understand that you'll need to make some adjustments yourself.
I think it's somewhat out of bounds.
It took me two days to install it, but although I succeeded in installing it safely, I still have concerns about the strength of the part that needed bending and the contact of the terminals.
The good news is that there is no other way to look at it.
View detail
Plating is Beauty
Was the one you received as per Image?
It's almost exactly as Image, but the base is cheaply made.
[Points to note]
You need to pay attention to the Wiring, and it doesn't work according to the Instruction Manual. Both the wiring of the single car and the wire of this product must be cut and connected.
The pedestal has rusted within 6 months.
View detail
The wire was broken at 9000kmMeter after installation.
The brightness is bright enough not to be compared with other products, but due to the disconnection of the 3-pole coupler coming out of the body, both Low beam and High beam are not attached. In addition to the thinness of the original wire, it seems to be because the force is easily applied to the pulling direction because the wiring is short. View detail
Fits: HARLEY-DAVIDSON Neofactory 5-3/4InchHeadlight
Not good.
The whole thing is cheap and the Lens cut is subtle, so I stopped using it right away. View detail
Fits: SUZUKI GSX-R1100 (GU74A), SUZUKI GSX-R1100 (GV73A), HONDA CBR250RR (MC22), HONDA CBR250R (1-light vehicle MC41), HONDA CBR125R (JC50), HONDA CB750 (RC42), HONDA CB650F (RC83), HONDA CB400SS (NC41), HONDA CB400X (NC47), HONDA CB400SF (NC42), HONDA CB400F (NC36), HONDA CB400F (NC47), HONDA CB400SF (NC39), HONDA CB250F (MC43), HONDA CB1300SF (SC54), HONDA CB1300SF (SC40), HONDA CB1000SF (SC30), HONDA 400X (NC47), HONDA CB1000R (SC60), SUZUKI GSX-S1000 (GT79B)
It didn't pass inspection.
I felt that it became brighter, but it did not pass the inspection. I had to replace the light with a simple Orange light at a motorcycle shop to pass the inspection. It was expensive. View detail
Fits: BMW , BMW R1200RS, BMW S1000RR, BMW S1000XR, BMW S1000R, BMW R1200RS, BMW S1000RR, BMW S1000XR, BMW S1000R
I'm happy with the brightness.
I replaced the OEM Halogen bulb.
At the time of exchange, whether it is individual difference or the cause is not clear, but even if it sticks to the back, it is not fixed firmly, the accident which this product falls into the Headlight unit occurred. The brightness is also sufficient otherwise, and because the color changes, I think that Makeover can be done to Large width.
View detail
Fits: HONDA Super Cub 110, SUZUKI Let's 5, SUZUKI Let's 4, HONDA Lead 50, SUZUKI Address V50 (4-stroke), HONDA Lead 110 (EX), SUZUKI Let's 5, HONDA PCX125, HONDA PCX150, HONDA Lead EX, HONDA Lead 110 (EX), SUZUKI Let's 5, HONDA PCX125, HONDA PCX150, HONDA Lead EX
It's the same as OEM ball. Installed in JA07
The headlight of JA07 is a multi-reflector with a round and large reflector, but the good side is not utilized at all, and I was fed up with the darkness that was inferior to the old iron CUB. (By the way, the successor JA10 has HS1=H4 Valve and is quite bright even if the reflector is square.
Then, I introduced SPHERE LED Headlight NEOL HS5 type which cost almost 10,000 yen, but I encountered Trouble that the amount of light of LowBeam was reduced by half twice in succession before I drove even 1,000km. (It was good that it was much brighter than normal)
I bought this product because I was tired of it and I only drive in the city and I wanted to change back to Halogen bulbs.
M&H's B2 was a fan that I always replaced on my Large Scooter, but compared to the old PH7, the newer HS1 and 5 designs were brighter than the OEM Halogen. If the life span is shorter than OEM, I think there is no need to choose it.
View detail
Difficult to keep up with
Installed on a '17 CRF250M
This is the corresponding Relay, which is essential for the LED Blinker to flash properly. Since it has been taken care of in almost all the car models that I have ridden until now, there is no problem in the performance that is required.
But the size is bigger than OEM Relay. It may be difficult to fit in some car models.
Since the wiring is longer than the OEM and the connection coupler is universal, the OEM waterproof cap may not be able to protect the water. When driving for a long period of time in the rain or in large rain, the flashing abnormality caused by the leakage occurred in both current and past models.
It returns to the original state when it dries, and it is possible to protect it with WaterproofGrease etc., but it recurs when I forget.
Of course, there were some car models that had no problem, so it's hard to say, but... I hope this helps.
View detail
Is the luminescent color Red?
Blinker lens. [Color] I thought about purchasing the Orange color Valve because I chose Clear. I bought this product of coating so that it may not stand out, but the S bulb is no problem, but the W bulb's luminous color is like Red and the brightness is dark, and I decided to use the Orange bulb of the company. View detail
Fits: HONDA CBX750F, HONDA PS250, HONDA VFR400K/Z, KYMCO B&W250, KYMCO CARO2, KYMCO KCR125, KYMCO SUPER9 50, KYMCO VITALITY 50, その他 , HONDA Rebel (-1999), YAMAHA VOX, YAMAHA FZR750, SYM Wolf Classic, SUZUKI RH250, SUZUKI RA125, MALAGUTI PassWord250, PIAGGIO ICE50, HONDA SPACY125, HONDA CS250SE, HONDA XLR250
Improved light intensity, but shorter life
The brightness will be improved, but the Grip heater in Handlebar will not work because the amount of electricity used will increase.
In addition, the period of use becomes short after about one year, and there is not much merit for the purchase price.
View detail
Fits: HONDA SUPER CUB 50, HONDA GYRO CANOPY, HONDA Universal, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50
Replace Stop-lamp with LED
I replaced the Stop-lamp on my 2004 LITTLE CUBCarburetor Vehicles.
When I noticed that the Position was not lighting up, I had a Motorcycle shop look at it and they said that there is a difference between AC and DC, so just replacing it will not light up the Position.
I asked him to tweak the Wiring around the Battery and it lights up fine.
The length of the Lamp insert is too long, so it doesn't fit the Snap and I was worried that it might come off wobbly.
If you stick it with Vinyl Tape or leave it as it is and a problem comes out, if you replace the insertion port of the LITTLE CUB side, it will be Large durable.
I think it's a bit dark, but I'm no longer worried about the ball breaking, so we'll see.
View detail
Other than the way it looked, it was a disappointment.
I bought this to Refreshing the look of the product.
As expected, it looks better, but the quality is not good, the lens is foggy and Rust occurs soon, so I returned to OEM. I think the price is too high for the quality.
View detail