Reviews
Custom Standard Tail Lamp
[How is it used?
Installed on Yamaha's WR155R.
The Fender Eliminator is installed by removing the existing Tail Lamp...
However, even though the shape was the same at a glance, the screw position was different, and we had to modify it.
Was the one you received as per Image?
The mounting screws are as shown in the Image, except for the Screws and Wiring outlet!
I hadn't thought that far ahead!
Was the installation difficult?
Some processing has been done.
Here's the Fender Eliminator Kit I installed ↓↓.
https://imp.webike.net/article/570988/
The Tail Lamp License Plate Light that originally came with the Fender Eliminator Kit has a bad contact and does not glow or shine.
The construction was also somewhat cheap, so I decided to change it at this time and chose DRC for safety and security.
I thought they must have been made in imitation of DRC because the shape is the same, so I put them side by side.
Like the image, there is something slightly different about the W.
The holes in the bracket were already fixed, so we drilled holes in them.
I tried to install it with some gapping, but I thought it was OK, but now the hole size of the wiring does not fit.
The hole was the same size as the 10mm Drill hole on hand, so I gave up on extending the hole and installed a Nut in between to keep it a little floated. Well, it is not heavy, so it should be sturdy.
The WiringCoupler for the Body and Tail Lamp is also changed to Universal Product.
How was your experience with it?
As expected from the DRC, it is a safe light.
[Included Parts:were they on?
Bullet Terminal, not used this time.
[Was there anything that disappointed you?
No need to say anything since it is a Universal Product! The person who installs the product should do his/her best to make it work.
View detail
RIZING3 H4Hi/Lo installation and usage
Vehicle installed:SEA BASS DJEBEL250 XC
The heat sink interferes with the black plastic parts on the headlight reverse side, so it is necessary to shave it off. The wiring of the HID unit may be a little long, but it will not be a problem for installation.
The feeling is that it is very bright and the light distribution is not bad as I used to use cheap Halogen bulbs from Auto for Vehicle.
It is a good product for those who have a Grip heater or other equipment installed afterwards, as it consumes less power.
View detail
Fits: HONDA Dunk, HONDA Sh mode, HONDA Giorno, HONDA BENLY50, HONDA CROSS CUB, HONDA BENLY50110, HONDA DIO110, HONDA glom, HONDA FORZASi, YAMAHA VOX, YAMAHA VOXDELUXE, YAMAHA VOXLIMITED, YAMAHA GEAR, YAMAHA NEWS GEAR, YAMAHA VINO, YAMAHA VINODX, YAMAHA VINOMolar feh, YAMAHA SDR, YAMAHA MAJESTY, YAMAHA MAJESTYC
Bright!
I bought a used VINODELUXE Valve because it was out of stock, so I looked for it and found it.
It is not made in China, which I have never heard of, and which I sometimes see on Amazon and other places. The brightness is nothing compared to the Normal valve. It is bright! It is enough for the speed range of a moped.
It may be a problem on the vehicle side, but switching from Low to High is smooth, but conversely, when changing from High to Low, I feel that it changes with a slight one-tempo13 delay.
View detail
Good product
The light can reach very far in the close-up mode. The telephoto mode is not very impressive. I mainly use low beam so the product is very suitable for me. I bought a lamp with a color temperature of 4500k which gives a pretty good light. --------------------------------------------------- -------- The lighting is very far in the projection mode. The far projection mode is not very impressive. I mainly use close lights so I see the product that is right for me. I bought lights with 4500k color heat quite well. Powered by Google Translator View detail
Depends on the shape of the Fork
It is not attached to the disc brake side of the PCXJK05, or rather, modification is required.
I purchased the DELTA DIRECT product separately.
Products can be used normally if Fork is 0.
View detail
Small and well made
Anyway, Small rythm.
Mounting is Large size.
I'm working on removing the Fender.
You should Masking when you remove it.
Fender Scratches
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Used to replace Blinker
I used it to replace the blinker on my z900rs. 2 in a pack so I ordered 2 for Front and 2 for Rear.
It would have been nice if Coupler was color coded like OEM.
View detail
Small
Rear Fender is removed and Large is a strange work.
I think we should leave this to the PROs.
View detail
POSH Faith LuminousLed Tail Lamp Unit
The Tail lamp from Musashi ran out of LEDs after 2 years, so this time it was made by POSH.
I chose the Smoked color and it was more than I expected. [Color] Smoke is thick and complete like Musashi in my opinion. [Color] I thought the Clear color was good.
Now we just need to know how durable it is….
View detail
Processing required for Bracket type
In the always-on VMAX, the Chinese LEDs died early, probably due to heat.
This time, I wanted to go with a domestic product for somewhat longer life, so I decided on Sphere.
God of thunder 2 was rejected due to its length.
If God of thunder gu ALPHA, I thought the length is Large sturdy and bought it.
However, the claws on the pedestal are not clear whether they are designed for the strength of the aluminum diecast or not, but there is an extra part of the pedestal, and the lock does not close due to the claws if the VMAX with Ring Type Valve BlockCap is not a Harigane Lock Type.
Since the Valve is an Aluminum Diecast body, it can be inserted by shaving it with a Leutor.
Brightness and optical axis were Large sturdy.
Clearance in the back is also included.
If you assume some processing, it is better to do a lighting test and process if Large sturdy, considering the warranty for initial defects. If you do the processing first, you will not get the warranty.
View detail
Used to replace Blinker
I used it on my z900rs, but it can't be fixed in position like KIJIMA or DAYTONA, and the material is iron, so I would have preferred DAYTONA's aluminum or KIJIMA's resin, but they were out of stock, so I went with this one. View detail
Required for Blinker replacement
I replaced the Blinker with a WideWattRelay. I thought the price was a little high compared to other manufacturers, but the picture is an OEM comparison. View detail
Fits: HONDA CBR250RRR, HONDA CBR400RR, HONDA CBR250, HONDA CBR400R, HONDA VFR400, HONDA CBR500R, HONDA CBR500R
Parts bought for Spare
I have not installed it in use, but I think it will be fine as long as the mounting bracket inside the Light is the same as the OEM one. View detail
Moderately Small
The size is moderately small and easy to use.
MT07 fitment is attached, but it can be installed as long as there is an M8 hole.
Note that the wiring is ultra-thin wiring and the available Bullet Terminal is smaller than the normal Bullet Terminal.
Wiring processing is required.
View detail
It works just fine!
[How is it used?
When we switched our Blinker to LED, Relay also needed to support LEDs, so we purchased this product.
Was the one you received as per Image?
The shape was exactly as shown in the Image.
Was the installation difficult?
It's easy, just remove the original Relay and attach this product.
How was your experience with it?
It works well and I have no problems with it. I would recommend that you purchase these when you convert to BlinkerLEDs.
[Included Parts:were they on?
There were none in particular.
[Was there anything that disappointed you?
There were none in particular.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Bright and white
RIZGIN2 is a fanless type LED headlight.
The bracket of the base is installed first, then the waterproof cap is installed, and then the body is inserted and attached as if it were hooked.
The controller is relatively small, and installation itself is easy.
Note that Cutline may not appear for LED Headlight depending on Lens/Reflector shape.
In the case of the MT-09, it seemed that the optical axis adjustment had to be set very low to pass inspection (depending on the chassis).
View detail
Not as bright as the Atto 3 in 1
I opted for the vertical mount/tinted Attos to place on top of my rear fender. These are NOT as bright as the non tinted 3 in 1 Attos. The photos I've attached doesn't really show this, you'll have to take my word for it. If I had the option, I would have chosen non tinted version. Don't get me wrong, these are still very bright for their tiny size. View detail
Easy External Blinkerfor ReplacementItems
[How is it used?
I purchased this product to replace the Front Blinker on my Yamaha MT-25 with an Other Brand Product.
Was the one you received as per Image?
As shown in the photo, there are four ABS Plastic Blinker bases in the package.
Was the installation difficult?
Installation is easy, as all you have to do is replace the Blinker and insert this product in between.
Quantity if you want to exchange front and back since you use two One Side cards on the front and back.:2 Sets are required.
How was your experience with it?
There was no specific compatibility information in Universal Product, but it could be used without any problem.
With this Base, Blinker has a wide range of choices in Other Brand Products, so you can choose the design you like.
I am satisfied with the quality and strength of the product itself with no particular problems.
[Included Parts:were they on?
Blinker base only.
[Was there anything that disappointed you?
It is a Universal Product, so it does not fit very snugly.
Considering the price point, I think it is inevitable.
【Review】
I think this is a good product that will give us more options for Blinker replacement.
There may be cheaper ones or more expensive ones with better quality if you look for them, but I think it would be safe to buy this one.
View detail
The 6v bulb, which is now rare and precious.
The 6V ball, which is now rare and precious, used to be available at Home center, but now it is not sold at all. 。 We keep several types under Seat in case the ball runs out while you are on the road. It is recommended to have a spare. View detail
MADMAX Blinker
Purchased for Honda Little Cub. There are questions about the quality of workmanship, short wires. Didn't like the interior design. In the end, I assembled something in between the old kit and the new one. If it is impossible to purchase original turns, you can take it, the price is adequate. -------------------------------------------------- -------- Bought for Honda Little Cub. In terms of manufacturing, there are questions, short wires. I did not like the internal design. In the end, he collected something average from the old set and new. If it is impossible to purchase original turns, you can take, the price is adequate. Powered by Google Translator View detail