Reviews
It did not light normally after 2 weeks
We had you install it at a dealer on August 26th this year and it ceased to light normally on September 7th.
As a symptom, when you parked Handlebar all the way to Left it turned out that the light disappeared, it turned on only when Handlebar was turned to Right.
High beam is normally on for now, but I am always in trouble because I can not always drive with High beam.
I called the service department of Protec and we responded to reverse the feelings of the user.
Although brightness is satisfied with Large, it will be unavoidable that it will not light normally without going on for two weeks.
View detail
Is it a decline in quality?
I have also loved it for a long time as a classic staple of OffLoader's classic, but this time the unbreakable lens attached to the New Machine is not broken, the selling Lens did not have a year and all four places were destroyed.
I use Motorcycle less frequently, so it is about 30 hours in real travel time.
As a situation, Lens's Screw part will be lucky with a luck Crack and Lens will drop out.
It has been installed in various Motorcycle for nearly 20 years but never ever happened to this.
Besides, at one location, it is only 4 places to be annihilated, it seems that quality is completely lower than before!
It is desirable to investigate the cause as soon as possible and take countermeasures.
View detail
Fits: KAWASAKI ZRX400, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZR-7, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI ZRX400, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZR-7, KAWASAKI GPZ900R, KAWASAKI GPZ750R
It is far from the OEMLevel finish
Gate processing has not been done, the part cut off from RUNNER 125 gouged slightly. The sink mark on the outside side of Screw is also terrible. Of price level or less. Valve is attached, but my ninja-kun is Single Bulb so I can not use it. I do not recommend it except for people who like Smoke anything.
View detail
Used for Front blinker
I tried putting three of Wiring, so I did not enter, so I made a hole 6. I extended it to 5 mm.
WiringQuantity : I entered without machining up to 2 pc.
The exchange was simple with Bolt open only with light, so it was easy to exchange.
View detail
Originally, in order to pay HIDLight supplements, purchase.
BREVA 's OEMHeadlight is difficult to see because High beam diffuses, supplementary notation of HIDLight 35 W (Igniter, Control Unit, etc.) In order to pay, OEM light case Small, so purchase, purchase.
Although the exterior appearance is good, although the high beam side is not yet, the irradiation range on the Low beam side is narrow and it is reasonable.
Also, for Left-hand Road, there is no Lens cut on the Right? To use it for a motorcycle with a car inspection, I'm concerned about Pass.
How much is Universal's Round TypeLight case, Quantity : Pair (for Left and Right) There is no even Screw of optical axis adjustment of what kind of thing.
View detail
Bracket breaking
As everyone is written, Bracket breaks. I also broke when I installed it. It is only the end that can be broken by wind pressure even while driving.. I think it is good to purchase Bracket separately because the shape is not bad and the price is also Reasonable.
And I tried removing Lens and Valve entered Socket? Already Rust.. I think that there is no problem in use, I think.. In other words, it is suitable for the price.
View detail
Fits: KAWASAKI GPZ900R NINJA [Ninja]., KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZRX400, KAWASAKI Z400GP, KAWASAKI Z1100GP, KAWASAKI Z1000R, SUZUKI gsx1100s katana [katana]., KAWASAKI GPZ900R NINJA [Ninja]., KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZRX400, KAWASAKI Z400GP, KAWASAKI Z1100GP, KAWASAKI Z1000R, SUZUKI gsx1100s katana [katana].
Now this - What will happen?
It's after Bly TEC Multi-reflector.
Literally "Plating is peeling".
Before exchanging PilotValve for LED and Headlight for HID, I used PilotValve, Halogen, so it may be due to heat, but part of Plating is peeling off. (The upper part of Valve is remarkable)
There is no problem at present for use, but I am a little worried. (I do not do much at night)
View detail
It is cheap and has a good reputation - - -
This is the second purchase. Parenthesis I like the Fender Eliminator well, so I liked it, but License Plate Light ceased to come on for about a year of use. I wanted to buy you if there is another design's good, but unfortunately I have not found it. OEM was disposed of, so we only had to buy this again.
I think that the cause of the bulb runs out probably is invasion of water. Water and mud are hanging around Wiring, and it is not strange even if water enters during car washing. Instruction Manual As I attached it to the street, well, I thought that it would be durable in the Large, but it was not Large sturdy at all.
This time I would like to install Waterproof measures securely.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
The texture is very good. But I'm sorry.
I wanted to change the handling of Accelerator Wire, so I bought this item. Material is stellance, so it looks very solid. However, I do not know whether it is an individual difference, but the holes that let the rear axle Bolt pass are not aligned. I managed to fix it with a thin Bolt but A little disappointing.
Those who are planning to install it may be better to ask the shops that can process it.
View detail
Fits: HONDA CD70 (Benly), HONDA Benly CD90, YAMAHA TZR50, YAMAHA Jog-A-Prio, YAMAHA Jog-A-Prio, YAMAHA Jog-A-Prio, YAMAHA Jog-A-Prio, YAMAHA Jog-A-Prio, SUZUKI street magic, SUZUKI Street Magic 110, HONDA NSR50, HONDA NSR80, YAMAHA MATE [mate] -99, YAMAHA RZ50, YAMAHA YB-1, YAMAHA Super Jog Z, YAMAHA Super Jog ZR, YAMAHA townmate, YAMAHA newsmate, SUZUKI LETS [LETS] DX 97-98
Three years to bring
There is a story that it is easy to cut brightly, and how it is actually
I used about three.
Sure it may be easy to break a bit.
1 pc is 1. 5 years, the 2nd and 3rd have only two-year strength.
Each mileage is 20 thousand kilometers, whereas during the day it is Light
I was erasing (It is Motorcycle of the era when it can be off)
If you hold it for as long as it is enough, you see it as less.
I think that is a little.
Regarding brightness, it is very bright.
When I first put it on, I really tried it.
As for this, it seems to be reasonable for the price, if it is over 1,000 yen
It is a little bright degree. DAYTONA's thing is definitely bright
It is a luxury item.
View detail
Waterproof
I installed it in D-TRACKER which I always use for commuting. License Plate Light dims after six months of installation, and it ceases to light up after one year. In order to investigate the cause, I removed Lens and looked inside. There was after the water entered the Lens. I ride the Motorcycle even on rainy days, I think that it is caused by the entry of water.
Although I knew it was removed, this product was not waterproof processed at all. I bought it because it is a famous DRC, but I thought that it is the same as Made in China's Tail lamp .... I wanted you to make solid details a little more solidly.
I'm sorry. The Flat LED of License Plate Light in the photo is no longer lit.
View detail
why - -
Nondefective has returned due to machining failure. Package and appearance were the same as the other one, but it turned out to be clear when energized
Yellow color appears Red. I thought that it was chaotic due to the mixture of the initial product, what a coincidence, I went over.
View detail
Fits: HONDA CB125, HONDA CBX125, HONDA DJ-1, HONDA gyro canopy, HONDA TLR200, HONDA Super Cub 50, HONDA Lead 50, HONDA Lead 90, PGO MyBuBu125, SUZUKI K90, SUZUKI street magic, SUZUKI birdie, SYM fighter150, YAMAHA Cygnus, YAMAHA Cygnus, YAMAHA jog, YAMAHA jog sports, HONDA CBR125, KYMCO SOONER100, HONDA WAVE125
disappointing
It is not so bright as I thought.
It is not very bright as the price goes.
I will use it for the time being, but it is the same feeling as OEM
It's fine because it's white.
I feel regrettable.
View detail
UV degradation
Although I was satisfied with Fit to Curve at the time of installation, I felt satisfied with Curve, but after about two years from installation, the LED's Clear cover was out of UV degradation or white turbid.
It keeps the vehicle on the covered Terrace, but maybe it may be due to the day being hit around Rear.
Although it is not that the direct date has been hit, it is honest disappointment. I replaced it, but purchased a product that is not the same item.
It seems that deterioration is quick except besides it is a flexible resin.
View detail
Bracket's strength is enough
Lens broke in the forest road running on the first day from installation.
Most people seem to be flying Lens,
When I crashed several times at the galley, I cracked normally.
As Bracket never got damaged, Lamp will not stick
I think that the point was good because it was not there.
The mounting position was attached to the OEMLamp and the LeftRear was broken.
For the time being damaged Lens Quantity : 1 Set Buy again.
KLX250 (08-) In case of Watt number difference, it becomes High flasher
We need to think about countermeasures.
View detail
Fits: YAMAHA FZ6-S Feather, YAMAHA FZ8, YAMAHA Feather 8, YAMAHA YZF-R6, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R1, YAMAHA XSR900, YAMAHA XSR700, YAMAHA XJ6N, YAMAHA WR250X, YAMAHA XJ6F 09-16, YAMAHA WR250R, YAMAHA TDM900, YAMAHA V-MAX 1680, YAMAHA MT-09, YAMAHA MT-07, YAMAHA MT-01, YAMAHA FZ6 04-17, YAMAHA FZ1 Feather
I want some ingenuity at this gold price
Is it still expensive? - - -
The hole is for M8 Bolt, but Yamaha's Blinker connector did not fit Limit. If you turn around Blinker, Quantity : Pair (for Left and Right) I will use OEMConnector by soldering it because it becomes unknown, but I noticed it after the Wiring process. In the end I also decided to cut off Wiring and solder..
At least one more around Large I want to consider carefully how to make a hole.
If there is time to purchase next time I will use the hole with a large Large.
View detail
The color is different from the photo
Because it was cheap, buy it as Universal Colol which Iloilo can use. The color is different when it arrives. In the photograph it is pure white, but what I received is milk White color - - - The color is close to Beige.
I'd rather Black rather than White. As I saw it, it looks like a deteriorating color.
I will use it other than the visible part.
Just without BALI molding is nice.
View detail
Depending on compatibility with Blinker
Honesty Relay has been replaced for LED, but I did not need it, but I purchased it with expectation for 50 Valve 's.
However, it was incompatible with Blinker I installed. (It is not an OEM)
I think it is because Lens is a flat surface, but as you can see when blinking, as shown in the photo, only the LED part will appear to shine.
I see only that part shining when I see it at a distance.
If Blinker who has Cut in Lens will be a better way of looking.
I do not know the durability because it is this price with Relay and Set, but I think it would be great if you compatibility with Lens.
☆ In the sense that the two were incompatible with yourself.
View detail
After all it was dark
I exchanged with 23 W Valve, but the result Valve is brighter and clearer.
Internal structure of Blinker (Cut of Reflector or Lens) I think that it depends on the size of Large, but it seems that it did not suit yourself. (Not OEM)
The Lens part of my favorite car Blinker is stronger than 30 mm, but is it better if it is a smaller type?
But the sharp blinking in Sharp is more Parenthesis better than Valve.
View detail
Fits: KAWASAKI Z1000, KAWASAKI Z250, KAWASAKI Z800, KAWASAKI NINJA400R, KAWASAKI NINJA250R, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX-6R, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI Z800, KAWASAKI Z250, KAWASAKI Z1000
A little Imechen
I bought it for a little Imechen.
Just to remove the screw and install it
The gap opens and it does not attach firmly (Molding required)
Because it is a consolidated price, I will return it and replace it, so I will mold it and attach it.
View detail