Reviews
The Lens has been removed. Can you help me with the warranty?
I have no problem installing it, but...
Lens came off during use.
View detail
UniversalKit's Case hole is too small.
I wanted to keep the OEMLight without removing the Rim, so I bought the UniversalKit.
However, the hole of the Cover of UniversalKit was too small to put Harness through the hole and put it in the Case.
I ended up removing the Outer Rim from the OEM and using the OEM Case.
It was the same as buying the cheapest one from the start, and the Cover and Outer Rim were wasted.
I'm not sure if this is a good idea or not. It's a good thing that I knew that it was hard to see.
View detail
Fits: KAWASAKI ZZR250, KAWASAKI ZZR1200, HONDA VTX1800, KAWASAKI ZX-12R, KAWASAKI ZX-11, KAWASAKI ZRX400-2, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1000R, HONDA CB1000SF, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZEPHYR1100, KAWASAKI ZR-7, KAWASAKI Z1000MK2, KAWASAKI Z400GP, KAWASAKI Z1, KAWASAKI W800, KAWASAKI W650, KAWASAKI NINJA250SL
It's not bright!
I saw the imp and thought it would be Large sturdy, so I bought it.
It is only a little brighter than Halogen bulb.
In addition, the Base and Body are fixed weakly by O-ring, so there is a fear that the optical axis will gap.
View detail
Fits: HONDA CB500F, HONDA CB750K6, HONDA CB750K5, HONDA CB750K4, HONDA CB750K3, HONDA CB750K2, HONDA CB750K1, HONDA CB750K0, HONDA CB400T, HONDA CB400F, HONDA CB350F, HONDA CB250T
Oh, no!
You can't do this!
It's cheap, sure, but ….
I put it on my OEM Blinker, but I had a bad feeling when I put it on. It doesn't tighten up properly and it's a bit squishy.
If water gets in, the inside will Rust.
If it is Ripro each other, it may be good, but if you buy only Lens, it may be safer to buy Body set.
It looks better, but it's expensive to Rust, so I'm sealing it. I am very disappointed.
View detail
With automatic lights-out function?
It turns on properly when the Engine is turned on, but it turns off naturally in 3 to 4 minutes. 。 If I turn the Engine off and on again, it turns on again, but then turns off again.
Looks like it has an automatic lights-out function. 。 This is for people with an average running time of 2-3 minutes.
View detail
Fits: その他 , SUZUKI ADDRESS V50, HONDA SUPER CUB110
It broke in a year.
I heard that Chinese products are easy to break, so I bought this domestic product.
Quantity for PCX125:2pc. Set use.
After 1 year and 2 months, one of the low beams is not lit (with a slight light).
The high beam lights up fine, but this makes it useless.
I thought it was a safe domestic product, but I was disappointed that the quality did not seem to be good for the price.
The warranty is not valid, and it is better to buy a cheap Chinese one to prepare for the breakage.
View detail
Fits: Others H4 Valve,HS1Valve DC12V lighting Minus common car
High beam not lit in a little over a year
It's been less than a year since I bought it for Hokkaido, but
I can't ride in the winter, so the High beam is now unlit, even though it's only been in use for a net of six months.
The Controller was mounted in a location that was not affected by heat, so it appears to be a durability defect on Valve's part.
It was a shoddy product.
View detail
Fits: SUZUKI address, SUZUKI Address V100, HONDA XR100MOTARD, HONDA XR50, HONDA APE, HONDA GORILLA, HONDA SUPER CUB 100, HONDA SUPER CUB 50, HONDA SUPER CUB 50DX, HONDA SUPER CUB 50STD, HONDA SUPER CUB 50BUSINESS, HONDA SPACY, HONDA TODAY, HONDA MAGNA50, HONDA MONKEY, HONDA LITTLE CUB, KAWASAKI KDX125, KAWASAKI KDX220, KAWASAKI KDX250R, KAWASAKI KLX250SR
The ball went out in a flash.
Within an hour of installing it and lighting it up, the inside of the Valve went black and the bulb went out shortly thereafter. I don't know if the inert gas inside was removed or not. I replaced it with a Japanese Small thread one, and it continues to light up without a problem, so I think it is an obvious product defect. View detail
There is a problem as a product
When I put on Fog Lamp, I thought that I would convert Headlight to LED for the purpose of reducing power consumption and decided to buy this product!
I installed it on my DL1000 V-STROM250 and it was no problem, as long as you have a hex tool, you don't need anything else.
I couldn't really check the light level etc. after the exchange in bright places, so I'll leave it there.
The voltage was also better than Halogen, I guess that's where LED comes in.
However, after the test lighting, when I tried to remove it from the connector to attach it to the main body, Wiring came off from the base as shown in the photograph, and it is a problem before the performance as LED that it comes off like this in spite of the place where force is applied.
So once it's on, you can't pull it out.
In addition, if this Level, there is a possibility that it will come off while driving.
Naturally, the quality is rated as poor and the cost is also poor because you can't even use it properly!
I haven't been able to contact them for a return etc. yet, so it depends on what they do in the future, but I think it's best not to buy this product.
It was so shoddy that I had to Review it immediately, I hope you find it helpful!
View detail
Fits: HONDA CROSS CUB, HONDA CROSSCUB110, HONDA CROSS CUB50
I'm in trouble.
Quantity of Fog Lamp2 pcs:Even though it's a set.
Bullet Type Terminal of Switch was for 1pc.
View detail
DL1000 V-STROM250
DL1000 V-STROM250
DAYTONA DAYTONALEDHeadlight Bulb Precuous Ray Z [Precious Ray Z] H4
Item Number:97430
Type:H4● High luminosity LED elements are arranged 6 each Hi/Low Brightness HiBeam1800Lumen/LowBeam1600Lumen (From DAYTONA measurement) Integrated Driver - Safe design based on JIS standards - Outstanding white color temperature - Adoption of electric fan with dustproof waterproof structure
Remarks:Number of Kelvin:6500K/ * This product is DC with Halogen bulb (DC) This product is only for 12V motorcycles, not for 6V or AC. (AC) This product cannot be used on motorcycles of * Before purchasing, please make sure that the type of vehicle to be installed and the valve shape match, and that the installation space is secured in the headlight case by referring to the measurement.
Please note:The manufacturer has not been able to confirm the installation results of the vehicle in question, so we are unable to answer questions regarding compatibility.
View detail
Lens melts in an hour after use.
It was made of steel and light Design was good, but Lens melted after 1 hour of use.
When you take it apart, Valve touches on the Lens.
This product has structural defects and is not recommended.
Do you feel like Manufacturer is just buying cheap Chinese and selling it?
View detail
Attention please!
This product was not compatible with my car's Headlight.
It was bright at first glance, but when I checked it carefully, a shadow like a line was drawn in the center of the road that I wanted to irradiate, and the brightness was dispersed.
The place which I want to irradiate is not seen in this, and it is dangerous, and the candela value at the time of the car inspection does not rise, and the car inspection is also NG though I adjusted the optical axis to Left.
This was much cheaper and brighter than the Halogen bulb before installation.
I will never purchase myself again!
View detail
I don't think I explained myself well enough!
I ran with a Can Seraer.
It cancels the Blinker, but
After all, you have to CancelPush the
That's the problem!
I'd like to see that in the purchase description.
I'd advise caution if you're considering buying one!
It's also quite difficult to install, so it's not for amateurs.
View detail
Does not fit the ZEPHYR1100 OEMHeadlight!
Webike I was informed that it fits by the confirmation answer, but I was not able to install it because it is smaller than the OEM Headlight. View detail
Fits: HONDA CB400SB, HONDA CB400SF, HONDA VTR250 typeLD, HONDA VTR250-F, HONDA VTR250
The thing is good, but it did not fit CB400SF.
Smoked Blinker Lens is included JFKFK334A02 (for VTR250) and the angle of notch on BoltBracket is different from CB400SF (2020) Front blinker.
You have to process (cut) it to get it on.
Either Endurance is wrong or Webike is wrong, but either way, be careful.
View detail
Fits: KAWASAKI ZEPHYR400 [Zephyr]., KAWASAKI ZEPHYR750 [Zephyr]., KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400, KAWASAKI ZEPHYR400 [Zephyr]., KAWASAKI ZEPHYR750 [Zephyr]., KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400
It broke right away.
When I took it off to replace the valve, the bracket of the screw of One Side was removed.
I didn't know it would break after just one removal…
I'm sorry
View detail
If you can't process it, it's useless.
I ordered the M10 Size and got one for M10 and one for M8?
I bought it because it's such a pain in the ass to process, and now I end up having to process it!
View detail
I'm compatible with the installation!
It is not fixed completely even if the bolt for the lock is tightened though it is about the installation with Square Type Blinker of the same manufacturer. If you don't take some measures, you will have wobble. View detail
It breaks off from the screw threaded part of the Screw.
There was one time it flew off while driving and I replaced it with another company's product.
I probably won't buy it again.
The video is FZr1000 love car introduction.
View detail