Reviews
Fits: HONDA APE 100, HONDA APE 100 TypeD, HONDA APE 50, HONDA APE TypeD, HONDA APE 50, HONDA Ape 100 Type D, HONDA Ape Type D
It is used for Ape100. Seemingly the bulb life became short when it was not a thing of the rubber in vibration of the single, and this was chosen. As a result of matching with other parts and a color-balance being also good, are all right? Kan
It is used for Ape100.
Seemingly the bulb life became short when it was not a thing of the rubber in vibration of the single, and this was chosen.
As a result of matching with other parts and a color-balance being also good, are all right?
Kana w
View detail
It attached to Z1! A size is also right just, and it was comfortable, and Z1 of tic normal was regarded as matching very much, and was very good.
It attached to Z1! A size is also right just, and it was comfortable, and Z1 of tic normal was regarded as matching very much, and was very good. View detail
An authentic positive one was unfashionable and exchanged for the LED flasher of DRC. It is as small as a refreshing, and a design also becomes a stylish and appearance's is beautiful. The flasher register was used together for attachment. Sin
An authentic positive one was unfashionable and exchanged for the LED flasher of DRC.
It is as small as a refreshing, and a design also becomes a stylish and appearance's is beautiful.
The flasher register was used together for attachment.
Since a plug is also an accessory, attaching immediately is possible.
Although the durability by vibration, fall, etc. cannot be understood only by having attached, it is OK in that which appearance says.
However, although possibly its MONO was HAZURE, the attachment bolt part broke on the way ....
Since it attached as it is somehow, it uses as it is.
Although it is three stars by that cause, on the article and the design target, it is pleasing.
View detail
I think that you may be finely collected since it attaches to an under bracket. However, I think that how to attach if it can do since it will interfere in an under bracket if you think that he will attach a blinker perpendicularly and several back mi
I think that you may be finely collected since it attaches to an under bracket.
However, I think that how to attach if it can do since it will interfere in an under bracket if you think that he will attach a blinker perpendicularly and several back millimeters will be extended also spread.
Those who think will attach perpendicularly should be careful.
View detail
It equips for the purpose of derating to a battery. If it becomes less than position light 5W x2=10W ->1W if normal Brightness has no problem because of a position lamp. It is thought that the color became bright white. A price should stre
It equips for the purpose of derating to a battery.
If it becomes less than position light 5W x2=10W ->1W if normal
Brightness has no problem because of a position lamp.
It is thought that the color became bright white.
A price should stretch the subtracting point very well.
I think that it is good for a light tune.
View detail
Fits: HONDA NSR50, HONDA NSR50, HONDA NSR80, HONDA NSR80, HONDA XR50 Motard, HONDA ZOOMER, HONDA ZOOMER, HONDA XR100MOTARD
Considering this product and a price, it is recommended. I think that this product is not harnessed unless it changes the tail of normal, even if it merely changes only this. A feeling of unification comes out in exchange for a tail, and it is rat
Considering this product and a price, it is recommended.
I think that this product is not harnessed unless it changes the tail of normal, even if it merely changes only this.
A feeling of unification comes out in exchange for a tail, and it is rather beautiful.
There is no bad point in particular.
View detail
The aerosharp mini-blinker is attached to the tail cowl of VTR250. ; said to be hard to see [!! ] by the friend when it went to touring although he bought smoke at first; the orange lens was ordered there targeting improve visibility. I think well
The aerosharp mini-blinker is attached to the tail cowl of VTR250.
; said to be hard to see [!! ] by the friend when it went to touring although he bought smoke at first; the orange lens was ordered there targeting improve visibility.
I think well that it became more legible than smoke in the daytime.
Was it still better when it was a little brighter color?
View detail
Fits: HONDA ZOOMER, HONDA ZOOMER, HONDA Zoomer
It attached to the zoomer (ruckus). Custom, although it had equipped with the hurricane mini-blinker set before, although admiration came out, a blinker jumps out horizontally, and a style has a part of dissatisfaction, and it purchased this set.
It attached to the zoomer (ruckus).
Custom, although it had equipped with the hurricane mini-blinker set before, although admiration came out, a blinker jumps out horizontally, and a style has a part of dissatisfaction, and it purchased this set.
Although a few was regarded as the kana which touch [ tic / normally ] carries out, if it attaches, by touch made into the refreshing, it would become an impression very different from normal, and will be very much satisfied with except in style.
Since the rubber main part was only stuffed and the lens loosened immediately, this evaluation was used.
Although he will think that it is satisfactory if slack is checked diligently, or an adhesive bond is stuck merely for a while and it fixes ...
View detail
It just called it the kana which is not necessarily extraordinarily bright, necessarily dark, and bad as for visibility. Although exchanged for the white halogen bulb of PIAA from normal before, since normal and a brightness color hardly changed, it e
It just called it the kana which is not necessarily extraordinarily bright, necessarily dark, and bad as for visibility.
Although exchanged for the white halogen bulb of PIAA from normal before, since normal and a brightness color hardly changed, it exchanged for the super-high luminous-intensity LED bulb of PIAA.
M&H which it was not unexpectedly bright and the friend attached although he thought that it was bright and being purchased as it is by the object for a game a pine -- the LED bulb made from a stripe was paler, and since brightness was also a top, I exchanged for this product.
Although it is brighter than any old bulb and is a pale color, it cannot be said that it is conspicuous to there.
Although it may be a limit, considering the size of a bulb, I think that it is the better one for this class.
photograph: -- having shone in the middle of a car body, and headlight top neighborhoods -- that's right.
View detail
Although attached to other vehicles (CRF250X) by processing and appropriation, the tail lamp of the design whose edge was effective as the merchandise name matches the appearance of off-road one / motard vehicle of these days. By structure on which it
Although attached to other vehicles (CRF250X) by processing and appropriation, the tail lamp of the design whose edge was effective as the merchandise name matches the appearance of off-road one / motard vehicle of these days.
By structure on which it based strongly, the aluminum board like 2 mm thickness is likely to be remained unmoved by a little fall.
The stay for LED flashers of the same MOTOLED series as an accessory is attached.
View detail
Although its own motorcycle was not an off vehicle, visibility UP of a tail and a dress-up up also purchased the smoked lens type of the phantom tail light previously. He is doing connection only to wiring of a brake as an auxiliary brake light. S
Although its own motorcycle was not an off vehicle, visibility UP of a tail and a dress-up up also purchased the smoked lens type of the phantom tail light previously.
He is doing connection only to wiring of a brake as an auxiliary brake light.
Since it is fixation of a point and the lower part with bad good luminescence of the piece of good point, compact (size which is not asserted too much as an auxiliary brake light), and LED to a screw, a drilling process is required for a fender.
- a few -- expensive and a compact (it is small and uneasy as a tail lamp) -- I think once that there are visibility UP and the dress-up effect up as an auxiliary brake light.
Form has a form like a trapezoid which the light emitting part made large Ho's base, when it sees from a top.
Although a concrete size is in most, they are 90 mm (in long field of a light emitting part) in 60 mm long and width, and 20 mm only in height (in highest portion).
Although it is very compact, it is individually uneasy to use the smallness, therefore this as an independent tail lamp.
Incidentally about attachment, a total of three drilling processes for screw x2 and wiring are required.
If it may be necessary to make a hole but if full use of stay is made well, and it attaches to a smart, drilling will be required too.
Since it is individually satisfied as it is although it is somewhat more expensive, three stars are used.
View detail
Fits: HONDA CB400 FOUR, HONDA CB400 VerS, KAWASAKI ZR-7, HONDA CB500F, Others , KAWASAKI BALIUS II, KAWASAKI BALIUS, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, HONDA HORNET250, HONDA VTR250, HONDA CB400 SF
It purchased to VTR250. It compared pure, and since there were few cuts of a lens, Wright became bright and also went up visibility. Appearance is also very pleasing with the joke. Although it is satisfactory at a five stars if it is only this
It purchased to VTR250.
It compared pure, and since there were few cuts of a lens, Wright became bright and also went up visibility.
Appearance is also very pleasing with the joke.
Although it is satisfactory at a five stars if it is only this ... Why, the number of the stop location of a bolt or the holes for being required for fixation did not suit or and the multi-reflector which I purchased, but it took pains over wearing for a while.
Although it was certain that it is the die which conforms to VTR250 when I got the mechanic's friend to see, it was said that it could not attach if some are not processed from the above-mentioned reason.
It vacates and equips with a hole partly with a drill after all.
He cannot yet understand whether they were inferior goods and what it was ..
I will make it evaluation called a three stars by Kami based on this evaluation.
View detail
It has attached to MF08 forza. Since the pure halogen bulb was too yellow and disagreeable, it was changed. There is no blueness, and although it is quite close to white, when seeing from layman's appraisal, it has been said that it does not chang
It has attached to MF08 forza.
Since the pure halogen bulb was too yellow and disagreeable, it was changed.
There is no blueness, and although it is quite close to white, when seeing from layman's appraisal, it has been said that it does not change that it is not much pure.
An authentic positive one is a recommend at too yellow a person [ blueness ] ... if it is GT-X and XREME but.
View detail
After spraying to a chain, it brushes firmly. Although started, since it is hard to dry, time and effort can be brushed calmly. Most dirt remained also in the brush after chain cleaning, and it was a state (it seems that the dirt of the brush had
After spraying to a chain, it brushes firmly.
Although started, since it is hard to dry, time and effort can be brushed calmly.
Most dirt remained also in the brush after chain cleaning, and it was a state (it seems that the dirt of the brush had also come off at the time of chain cleaning).
However, since it will wash with water, it is troublesome to make it dry.
It is after [ in my case ] washing. Wipe off, and it neglect -> Wipes off -> half a day, and is -> chain lube. It is the condition to say.
View detail
Fits: HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, KAWASAKI ZRX400II, KAWASAKI ZRX400II, KAWASAKI ZRX400II, KAWASAKI ZRX400II, KAWASAKI ZRX400II, KAWASAKI ZRX400II, KAWASAKI BALIUS2, KAWASAKI BALIUS2, KAWASAKI BALIUS2, KAWASAKI BALIUS2, KAWASAKI BALIUS2
They are those with a difficulty to attachment -- brand-name parts must also be used and the nail of attaching must be bent. Moreover, those with the necessity that a pure twist also pushes in a harness since an inside becomes narrow. The engine p
They are those with a difficulty to attachment -- brand-name parts must also be used and the nail of attaching must be bent.
Moreover, those with the necessity that a pure twist also pushes in a harness since an inside becomes narrow.
The engine performance itself has no problem brightly.
View detail
BALIUS2 was equipped. Since it only exchanges for a pure lens, work can be done very simply. It is cheap, and also the dress-up effect up is also high, and it is very one recommended article. However, structure of the portion of the nail of a
BALIUS2 was equipped.
Since it only exchanges for a pure lens, work can be done very simply.
It is cheap, and also the dress-up effect up is also high, and it is very one recommended article.
However, structure of the portion of the nail of a lens is sweet, and if a screw is tightened, it is regrettable that the opposite side has come floating.
Although it is in a commodity introducing page with clear for the front lefts, it can use for all front and rear, right and left.
View detail
Fits: KAWASAKI ZRX400, KAWASAKI ZRX400II, KAWASAKI ZR-7/S
This blinker cheaply made in order to change an image was chosen. The mimic valve was chosen although the bulb was slightly expensive. An orange was not conspicuous, thanks to the mimic valve, and it became the appearance felt refreshed. Howev
This blinker cheaply made in order to change an image was chosen.
The mimic valve was chosen although the bulb was slightly expensive.
An orange was not conspicuous, thanks to the mimic valve, and it became the appearance felt refreshed.
However, although it does not understand probably because of a clear lens probably because of chrome plating, luminescence of the orange at the time of blink thinks that it is weak at the time of lighting.
Although it is not worrisome at night, I think ?, if visibility falls daytime.
View detail
It attached to MF08. Since the LED blinker was used, it attached, but removing cowls says clearly and it is troublesome. Since MF08 is coupler use, it needs preparation for beforehand [ thing ] which needs terminal processing of wiring. I want
It attached to MF08.
Since the LED blinker was used, it attached, but removing cowls says clearly and it is troublesome.
Since MF08 is coupler use, it needs preparation for beforehand [ thing ] which needs terminal processing of wiring.
I want you to only make the fault of goods a little cheaper.
It is common really not too bad.
View detail
Fits: HONDA NSR50, HONDA NSR50, HONDA NSR80, HONDA NSR80, HONDA XR50 Motard, HONDA ZOOMER, HONDA ZOOMER, HONDA XR100MOTARD
Although the feeling swung seeing a surrounding person changing almost although there was no mind with which it tampers since the blinker of normal was pleasing, normal is a clear lens in the reason for calling it good ... too. It is titanium coating.
Although the feeling swung seeing a surrounding person changing almost although there was no mind with which it tampers since the blinker of normal was pleasing, normal is a clear lens in the reason for calling it good ... too.
It is titanium coating.
An image can be renewed without changing the form of a blinker, if it is this.
View detail
I think that there is no difference with the other company. Although it is with KAWASAKI:W400, any vehicle types are possible for attachment. He equipped the frame. I am glad if there is Black's band.
I think that there is no difference with the other company.
Although it is with KAWASAKI:W400, any vehicle types are possible for attachment.
He equipped the frame.
I am glad if there is Black's band.
View detail