Reviews
ITType." What does that mean, Italy?
I wanted to change to a Tail lamp with an integrated License Plate Light. I could have chosen anything, but since the car I was installing it on is an old ItalianRacer, I looked for a design that would not ruin the atmosphere and decided on this one.
I think KIJIMA is the best because the valve is sold separately, but it is a product of a well-known manufacturer, inexpensive, and easily available, and KIJIMA also supplies small repair parts such as lenses and rubber base parts. KIJIMA and Tail lamps are strong for classic vehicles.
Personally, I am disappointed only in the Fixing Screw, which is too small, and the Nut and Washer are too small to work with, and the originally drilled holes are too large in diameter. If you are going to drill a hole in a cowl, I don't think M3 or M5 will make any difference.
The base of the Rubber has a fairly solid thickness, and these points are very favorable.
Although there are only three wings, a WiringMemo is included, and it is also designed with the beginner in mind.
View detail
For Meter Bulb in 6V vehicles
When I went out shopping at night with my Yamaha CHAPPY that I had restored, I could not see the Meter at all and thought it was out of bulbs, so I immediately purchased one.
YamahaOEM Parts are still available, but at a slightly higher price.
I looked up 6V3W and found this product, and since it was inexpensive and in stock, I snapped it up.
10mm BoltQuantity fixing Meter:Remove the 2pcs and the meter cable to access the wiring.
I replaced it and put it back together, and when I started the Engine, the Meter Bulb came on successfully.
Since it is 6V, it is naturally dark, and to be frank, you can only vaguely see the position of the needle when driving at night.
I don't plan to go far, so I'm satisfied that I can see for now.
View detail
Fits: HONDA CRM50, HONDA CRM80, HONDA TL125, HONDA TLR200, HONDA TLR250, HONDA XLR125, HONDA XLR200, HONDA XLR250, HONDA XLR80, HONDA CRM250, KAWASAKI KSR110, KAWASAKI KSR50, KAWASAKI KSR80, HONDA XR230, HONDA XR250, HONDA XR250 Motard, HONDA XR400 Motard, HONDA NSR50, HONDA NSR80, HONDA XR100 Motard
I think it's good
The installation itself is easy:remove the OEM and install this Light as is. There was no special modification. The glass surface of the Headlight looks like this, [Color] Now that it is Clear, I think it looks pretty cool. The brightness is not as bright as the OEM light lens, but the light distribution is more variable, and with the LED bulbs, it seems to be bright at a single point. View detail
Hazard added to XSR125; XSR's Blinker line was a Bullet Terminal from the start
I bought this to add a Hazard switch to my XSR125.
In light of future BlinkerLED, we decided to use DAYTONA's Blinker relay with Hazard function, which is compatible with bulbs & middot; LED.
For XSR125, the interrupt to BlinkerWiring is Large sturdy without processing.
The work procedure is
0.Prepare a DAYTONARelay and Hazard switch (that can be On and Off).
1.Remove the Seat.
2.Remove the Tail cowl.
3.Remove the blinker relay located forward under the Seat and install the DAYTONA Relay.
4.Interrupt BlinkerWiring in a cohesive Wiring behind the bottom of the Seat.
Connect DAYTONARelay's Orange to XSR's Brown line and sky blue to the Green line.
The XSR125 is a Bullet Terminal from the start, so it can be connected without modification.
5.Connect the prepared Hazard switch and DAYTONARelay Red?Black wire with Bullet Terminal processing.
6.Turn on Hazard switch and check operation.
7.Once confirmed, fix the Hazard switch and return Seat Cowl and Seat to their original settings to complete the process.
The work takes about one hour.
Electric Works Pliers or Wiring Connectors are required to connect the hazard switch for Bullet Terminal processing.
View detail
Installation on the XSR125 was easy.
Since XSR125 does not have a hazard switch, DAYTONA Relay with hazard function was selected in consideration of future Blinker LEDs.
BlinkerWiring on XSR125 is located under the Tail cowl and is a Bullet Terminal.
View detail
Fits: HONDA APE, HONDA BENLY50, HONDA DAX, HONDA MONKEY, HONDA CT110 HUNTER CUB, HONDA GB250 CLUBMAN, HONDA FTR223, HONDA CL400, HONDA FTR220, YAMAHA SRV250, YAMAHA RENAISSA, YAMAHA BRONCO, YAMAHA TW225, YAMAHA TW200, YAMAHA SR400, YAMAHA SR500, SUZUKI VANVAN, SUZUKI GN125, SUZUKI GS125, SUZUKI VOLTY
Not very good
The paint on some of these has a bumpy texture, like the units weren't clean when the paint was applied. One of them had an electrical short upon installation which was popping my signal fuse. Luckily I had bought a spare. Installaton wasn't a big problem, but I wish they used thicker gauge of wire, it's very thin. Very inexpensive blinkers, but you get what you pay for. I wish I had spent a little more and gotten better quality blinkers. View detail
Fanless LED
This LED is perfect for vehicles without the space behind the headlight, which is unique to off-road vehicles.
Almost the same size as OEMHalogen, so it can be installed without any problems.
View detail
Good
Adaptations had to be made so that the front lights could flash intermittentlyAbout quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasing View detail
HURRICANE HURRICANE Cat's Eye Mini Tail Lamp Kit
[How is it used?
The OEM tail lamp was replaced because it was too large.
Was the one you received as per Image?
It was nice and clean as per Image.
Was the installation difficult?
It is not that difficult.
How was your experience with it?
It was nice to see it look shapely.
It is good because I have not seen many people installing them.
[Included Parts:were they on?
There is none
[Was there anything that disappointed you?
The point where the Red light from the Tail lamp illuminates the Number.
Blackish Tape was pasted inside to keep it from illuminating.
View detail
Fits: HONDA CB125, HONDA CBX125, HONDA DJ-1, HONDA gyro canopy, HONDA TLR200, HONDA Super Cub 50, HONDA Lead 50, HONDA Lead 90, PGO MyBuBu125, SUZUKI K90, SUZUKI street magic, SUZUKI birdie, SYM fighter150, YAMAHA Cygnus, YAMAHA Cygnus, YAMAHA jog, YAMAHA jog sports, HONDA CBR125, KYMCO SOONER100, HONDA WAVE125
1P2014
The head lamp on my Honda Little Cub burned out. I liked the price and parameters of this lamp (not much power does not overheat the cartridge). Everything turned out to be good in quality, the lamp works perfectly. View detail
inconspicuous
I was a bit surprised at the price for such a bracket, but considering the time and effort required to find a substitute and the fit, it may be inexpensive.
The method of installation is up to you.
View detail
Fits: HONDA SUPER CUB 90 (SUPER CUB), HONDA SUPER CUB 90 (SUPER CUB), HONDA SUPER CUB 70 (SUPER CUB), HONDA SUPER CUB 50 CUM (SUPER CUB), HONDA SUPER CUB 50 CUM (SUPER CUB), HONDA SUPER CUB 50 CUM (SUPER CUB), HONDA SUPER CUB 50 CUM (SUPER CUB), HONDA SUPER CUB 50 CUM (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB (SUPER CUB)
LLH-19
Purchased for HONDA SUPER CUB 50 CUSTOM. The native glass was cracked and had a bad appearance. The new glass is perfectly sized. Externally, everything is harmonious. Great price! If necessary, it is worth taking… View detail
Fits: HONDA SUPER CUB 90 (SUPER CUB), HONDA SUPER CUB 90 (SUPER CUB), HONDA SUPER CUB 70 (SUPER CUB), HONDA SUPER CUB 50 CUM (SUPER CUB), HONDA SUPER CUB 50 CUM (SUPER CUB), HONDA SUPER CUB 50 CUM (SUPER CUB), HONDA SUPER CUB 50 CUM (SUPER CUB), HONDA SUPER CUB 50 CUM (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB (SUPER CUB)
NTB
This glass was needed by my friend on the SUPER CUB CUSTOM, as he had problems. Everything turned out to be great in terms of quality, there were no problems during installation. My friend was satisfied with the purchase. View detail
Insufficient product description
The product is great. But in the product description. Luminescent Color White And "White is outstanding." The "White" is for the 6500Kelvin, not the 4500Kelvin which is an electric light color. I bought the 4500Kelvin thinking it was a low light White, installed it, and then realized it was an electric light color and applied for a replacement, which was denied. View detail
Easily Black Spec.
[How is it used?
Street riding.
Was the one you received as per Image?
It is not so bad, but not so bad.
Was the installation difficult?
Just remove one Screw and insert it.
How was your experience with it?
Blinker's Plating was a bad girl and I was concerned about it, but here it all went away.
[Was there anything that disappointed you?
Roughness of the manufacturing process. BALI removal and file hanging are essential before installation because of the great BALI.
Other items that would be helpful
Availability and clarity of Instruction Manual
No Instruction Manual.
Opinions and requests to Manufacturer
I would like to see you at least take BALI.
View detail
CROSS CUB auxiliary light
Headlight is dark, so it was introduced as an auxiliary light.
Is the screw that fastens the Light to the Bracket too long? The Others are as expected.
View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
Easy installation, no brightness problems.
Until now, we had been using Type with LEDs affixed at the top and bottom, but the straightness of the LEDs was poor when Up is lit, so we always used the LEDs facing down.
This type of LEDs are affixed in the LeftRight type, so the straightness when the LEDs are up is also OK. This time, I installed it on a square eye light, but I think it would be best for a round eye light. Finally, I am satisfied with the brightness.
View detail
Tail Bulb replacement for KSR's Fender Eliminator Kit
I purchased a used KSR80, but the previous owner installed a Fender Eliminator Kit, and the tail lamp is a Lucas type.
There was a Trouble with Tail Bulb immediately after purchase.
I removed the Lens to see the model of the Lamp to replace it, but unlike the usual Double Bulb, the head was a Small Rhinoceros Bulb.
This Type was not sold at Home center or Car Shop 。 Maybe MotorcycleParts specialty stores have them, but I can't find any near me. 。
However, because the length of the Tail Bulb was different, it interfered with the Lens, causing the Lens to chip, melt, and consume more power due to its higher wattage.
I had put it off because it was inexpensive but the shipping and other things made it needlessly expensive, but I had some shopping to do at WeBig, so I bought it as a package deal.
After installation, there was no interference (obviously), and since the Watt number was lowered, the power consumption was also lowered, eliminating the concern factor.
I am planning to eventually switch to LEDs, but there is a barrier of full-wave rectification, so I may end up putting it off.
View detail
Beautiful lights
The lights feel and look beautiful and visibility is improved!
As for the price, I personally think it would have been easier to afford if it were a little cheaper.
View detail
Favorite Large size difference
I am in love with this Size! I am so glad I bought it! View detail