Reviews
Durability..
1st purchase - Bulb expired in approx. 1 year.
Second purchase - Bulb expired after 1.5 years.
It looks good, but not with this durability.
View detail
Difficult to keep up with
Installed on a '17 CRF250M
This is the corresponding Relay, which is essential for the LED Blinker to flash properly. Since it has been taken care of in almost all the car models that I have ridden until now, there is no problem in the performance that is required.
But the size is bigger than OEM Relay. It may be difficult to fit in some car models.
Since the wiring is longer than the OEM and the connection coupler is universal, the OEM waterproof cap may not be able to protect the water. When driving for a long period of time in the rain or in large rain, the flashing abnormality caused by the leakage occurred in both current and past models.
It returns to the original state when it dries, and it is possible to protect it with WaterproofGrease etc., but it recurs when I forget.
Of course, there were some car models that had no problem, so it's hard to say, but... I hope this helps.
View detail
Is the luminescent color Red?
Blinker lens. [Color] I thought about purchasing the Orange color Valve because I chose Clear. I bought this product of coating so that it may not stand out, but the S bulb is no problem, but the W bulb's luminous color is like Red and the brightness is dark, and I decided to use the Orange bulb of the company. View detail
Fits: HONDA CBR600F, HONDA CBR1000RR, HONDA CBR600RR, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 Super Four, HONDA CBR954RRFire blade
Replaced with LED.
Because the phenomenon that the License Plate Light flickers in synchronization with the blink of the Blinker occurred, LED was carried out.
The flickering of the License Plate Light has been eliminated by changing to LED.
I also replaced the Relay with the enclosed Relay, but after using it for about 3 months, the Position lamp and Quantity:Pair (for Left and Right) Blinker and Hazard lamp don't light up at all anymore. Is this a durability issue? It's a shame because they blink beautifully.
View detail
Repair cosmetic scratches with oil-based Magic
The design and construction of the product itself is good, but there is a mark that looks like a cosmetic scratch was Repaired with oil-based Magic. View detail
Request for return
This is a CF POSH tail lamp, but the product I received had no evidence to identify it as a POSH product. Normally when you buy a product in a shop it comes in a Manufacturer's package, but this product was just wrapped in a Nylon bag and in a suitable box. There was a Seal on the box, but no POSH name, nor is there any stamp on the product.
I haven't received a reply yet, although I have submitted a return request as I don't have any proof of manufacturer.
If you are unsure, you should avoid buying it. If it's made inexpensive mid-0, it's Shock.
View detail
Fits: HONDA CBR600F, HONDA CBR600F, HONDA CBR600RR, HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA CBR1000RR, HONDA CBR954RRFire blade, HONDA VTR1000FVTR1000F FIRESTORM, HONDA VTR1000SP
Not bad
I put it on my CB400SF, the atmosphere is much different than the OEM and it was just like the image However, it is difficult for Valve to fit into the Bulb Socket and the Pin Size should be a little larger In addition, because the packing that removed OEM was degraded and could not be reused, Cover It would have been 5 stars if it had a packing In the end, I bought Repair Lens Packing Well, it is not bad View detail
The strength of resin Parts is not good
Screw receiving side fixing Lens (resin) It was weak, just being opened and closed a few times became stupid → To fix Lens with Vinyl Tape. Also, the part supporting the bulb (resin) Is poor, Fixing Screw is easy to relax → light bulb falls inside and Lens melts and deforms due to heat
... I liked it, but I only used about 2 months, I replaced it with KIJIMA.
View detail
Fits: HONDA CBR600F, HONDA CB1300 Super Four, HONDA CB400 SUPER BOL D'OR, HONDA CB400 SUPER FOUR, HONDA CBR1000RR, HONDA CBR600F, HONDA CBR600RR, HONDA CBR954RRFire blade, HONDA VTR1000FVTR1000F FIRESTORM, HONDA VTR1000SP, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR
Grinding with Grinder
Since it was written as CB 1300SB, I bought it, but in the Bordeaux of the 09 year model I grabbed Grinder and forcibly attached the place where the inside shape did not fit and became an obstruction.
It seems that water has not entered or taken off, so I will try to see how it is going - - -
View detail
The color is different from the photo
Because it was cheap, buy it as Universal Colol which Iloilo can use. The color is different when it arrives. In the photograph it is pure white, but what I received is milk White color - - - The color is close to Beige.
I'd rather Black rather than White. As I saw it, it looks like a deteriorating color.
I will use it other than the visible part.
Just without BALI molding is nice.
View detail
Fits: KAWASAKI Z1000, KAWASAKI Z250, KAWASAKI Z800, KAWASAKI NINJA400R, KAWASAKI NINJA250R, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX-6R, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI Z800, KAWASAKI Z250, KAWASAKI Z1000
A little Imechen
I bought it for a little Imechen.
Just to remove the screw and install it
The gap opens and it does not attach firmly (Molding required)
Because it is a consolidated price, I will return it and replace it, so I will mold it and attach it.
View detail
Although it thought whether this price would be profitable and a two-piece Set ordered, they were goods with one ON. The product itself does not have cheapness, either and it is a good thing. Since the number of ON is important information,
Although it thought whether this price would be profitable and a two-piece Set ordered, they were goods with one ON.
The
product itself does not have cheapness, either and it is a good thing.
Since the number of
ON is important information, it demands the statement to a goods Page.
View detail
Fits: YAMAHA XJR1300, YAMAHA XJR400, YAMAHA XJR400R
That there is nothing well like the attachment 1 or the moon. If a Cover is removed in order rain is encountered on a Touring and to wash a car last week as the point, water by no means to the Lens inner side on the left-hand side of back .
That there is nothing well like the attachment 1 or the moon.
If a Cover is removed in order rain is encountered on a Touring and to wash a car last week as the point, water by no means to the Lens inner side on the left-hand side of
back ... for water proof of
wiring,
It is that
rain enters in spite of having rolled the Vinyl tape more than the instruction manual! Isn't doing ???
failure of whether it is a Packing neighborhood of the
Lens and a main part also a question of time!! It is too late to use as the LED Blinker of
other company.
We cannot recommend this to you!
View detail
When LED-ization of the blinker was considered and many things were seen, these items stopped at eyes, and since the forme was pleasing, it purchased in passing. Although it becomes wearing to a honda and X4LD, the pitch of an attachment bolt is compl
When LED-ization of the blinker was considered and many things were seen, these items stopped at eyes, and since the forme was pleasing, it purchased in passing.
Although it becomes wearing to a honda and X4LD, the pitch of an attachment bolt is completely the same as normal.
If a terminal is changed into a flat package type male from the plug of an initial state, it can equip with the rest as it is.
As appearance, it is the sharp line.
Furthermore, each LED is independently surrounded by the reflector and it is preeminent for smartness also at the time of putting out lights.
If the light is switched on at night, light will reflect inside a lens, if it sees from width, an outline will emerge red, and the beauty cannot be tasted if normal.
Visibility is quite bad although it is as good as ... so far.
It may be caught in an automobile inspection.
- Unless it comes out from right behind mostly, lighting of all the LED cannot be checked.
When last-minute [ within the limits of the standard at the time of four directions and an automobile inspection ], it turns out that the light is switched on once.
Since it is very hard to be visible with especially the Kami object, it becomes anxious with whether a truck clashes from behind.
- Although the number LGT is also attached, the irradiation range is narrow and is an addition grade (by the picture, a tape closes and it is using the thing which LED-ized the number LGT of normal).
- At the time of brake lighting, change of the quantity of light is seldom felt, but thinks whether to fill 5 times which is a standard.
This will stop weighing appearance and safety on a scale, and it will attach electric lamp type LED to the unit of normal.
View detail