Reviews
Used as License Plate Light
The light is originally designed to illuminate the foot area, so the light does not spread out, but I use it because I need to illuminate it for now because Mr. Peepo will stop me if I do not have a License Plate Light. View detail
Amon 1806 blue . good one
Agin this time with amon mini blue led.outer good appearance and with little long cable. LED very small and more bright. Led low power consumption. Satisfied with product. Thanks Amon. View detail
Amon led 2715 super quality
This is my 2nd order .this time I'm using this light for car rear door light illumination at night while open door.This is less power and more bright .Super quality and genuine fitting.even water proof.amon product highly recommended and super customer service webike.Thank you View detail
Amon2857
Led dimming unit.product small long with double sided tape. Very easy and outlook appearance superb. Another big thing is while using it has memory function no need to worry about the last settings.highly Recommended product for DIY car/bike enthusiast. Thanks Amon View detail
Amon 2715 led
Super quality and Low power consumption.out look super genuine quality.. Installation in box inside along with amon magent switch.. I'm really happy about amon products. Highly recommended. View detail
No way Double-sided Tape retrofit Type.
It may be Large strange to stick Double-sided Tape which is hard to stick so that it does not stick out.
The video is a shot of my car Meter with 30cm Type Blue as lighting.
[How is it used?
Meter internal lighting etc. as shown in the video.
Was the one you received as per Image?
Emon products are of good quality.
How was your experience with it?
Double-sided tape is powerful.
[Points to note]
If it is 60cm, Double-sided Tape is divided into two parts, and it is troublesome to attach.
How did it compare to other products?
Attaching Double-sided Tape is troublesome.
Other items that would be helpful
Point of installation or hang/double-sided tape may be fine only where adhesion is needed.
Items to buy together/Chemical to degrease when pasting
Comments and requests to Manufacturer/Would you prefer Double-sided Tape to be attached from the beginning?
View detail
Used for FZr1000 Small lamp, anyway it is bright.
I built in the Small lamp on the Upper Cowl of FZr1000 3GM (mystery).
Of course Flat LED Lens cover URL → https://www.webike.net/sd/23201839/We also use
I don't need the goods to be this bright, but I wanted to do something different.
There is polarity, so please do not make a mistake when Wiring.
* The video is lit when you introduce your car
View detail
It's made by Emon!
I've been using it for about six months now, and I'm using it to illuminate the Under of my motorcycle The light intensity is not too bright and not too dark, but just right It is very convenient because it is possible to both paste and embed It has been six months, but there was no light intensity down The Chinese LED Tape becomes darker in about half a year, but it is made by Emon View detail
Durability is difficult
We used it as License Plate Light of cbr250rr mc51.
It was disconnected from the root in about a month since wearing it. Brightness and diffusion angle are unquestionable.
I can not use it as License Plate Light ...
View detail
Used as Indicator Lamp
【What made you decide the purchase?】
- I wanted a Lamp for confirmation because I was worried whether I was moving even though I added a fan switch but pushing Button. I was looking for Emon when I was in trouble, where I was looking for, I found LED Lamp so I purchase it
【How was it actually used?】
- By pushing Switch, the LED glows and I can confirm the ON and OFF as the objective. Initially it was attached to the top of Meter but it's dazzling outside of my mind, every time I move my vision to Meter I got distracted by distraction and fail. So we installed it to the lower part of the Meter that does not hit the eyes directly, and made it indirectly lighted just fine
【Was it difficult to install? (Hard parts case)】
- Just connect to Plus and Minus for installation OK. In this time, Plus was linked from ACC, and Minus was connected to Body ground to link with Switch
- The thickness of Wiring is 0. Because it was hard to crimp the terminal thinly as 2 sq, 0. In place of 5 sq of Wiring, cover the Protective Tube and complete processing
【Please tell me the point of installation and hang (in the case of Hard parts)】
- Because it is the LED Light of the Universal Product, it will be like Indicator Lamp by using the company's Rock Mount and Tube Holder together
[Is there anything I was disappointed about?]
- nothing special
【Hope for Manufacturer - Please let me know if you have any improvement points]
- Since there are only two colors of Light Blue and White, I want five colors of green, yellow and red
【Have you compared items?】
- Each Manufacturer's Indicator Lamp
[Others] Because it is a combination of LED, resistance, Wiring, it is quicker to make your own self from the beginning
View detail
It is COSPA OK..
Because it is dark and stormy at night driving
keyhole. Tank direction
I tried pasting near Meter.
Not too bright, just look at your eyes with a good feeling
It is coloring.
View detail
The [purpose of use] Side-view type LED was chosen so that it might not become the hindrance of operation as lighting of a console box in the car. The light is always switched on for the [usable-years] year half [ about ]. -
The [purpose of use] Side-view type LED was chosen so that it might not become the hindrance of operation as lighting of a console box
in the car.
The light is always switched on for the
[usable-years]
year half [ about ].
-- [the comment
to be used] -- although equipped with all by DIY, for the moment, it is satisfactory to lighting.
Since it is a Side view (one side irradiation), only the portion of a console box with depth is illuminated, a luminous source is not visible to this side side, and it does not become the hindrance of operation.
Brightness is enough although it is one LED.
(Brightness which does not have trouble in operation) Since it is
LED, there is also little power dissipation, and an idling stop function was not satisfactorily different from before wearing, either, and is operating.
By the favor of the Cover which covers a light called the
[general comment]
Side view, it became a comfortable Illumination.
Since it is not waterproofness, it is unsuitable for a Motorcycle or the exterior.
Since wiring from LED was thin, pains were taken to connect with wiring of a power source.
Except for the point, it is very satisfactory.
View detail
It attached as a Foot Lamp of a car. Using a Lens cover for exclusive use, the light of LED diffuses and it is illuminating the whole. The description was also polite, and was intelligible and it was able to simplify it also in DIY.
It attached as a Foot Lamp of a car.
Using a Lens cover for exclusive use, the light of LED diffuses and it is illuminating the whole.
The description was also polite, and was intelligible and it was able to simplify it also in DIY.
Since it is not water proof, it cannot be used for the exterior.
Since it is a reliable Emon in the brightness more than imagination, it is satisfactory.
View detail
It installs as LED which illuminates an inside from the cowl duct of Ninja250R. A cover will be simple and an element will become almost unreserved. When attaching outside, I would like to be careful since it is not water proof. So strongly, a
It installs as LED which illuminates an inside from the cowl duct of Ninja250R.
A cover will be simple and an element will become almost unreserved.
When attaching outside, I would like to be careful since it is not water proof.
So strongly, although the quantity of light planned to have illuminated the inside of a cowl, it was able to be compared only with the feeling grade.
They were slightly regrettable goods.
View detail