Reviews
Bright and easy to see
[How is it used?
In accordance with the conversion to Fender Eliminator
Was the one you received as per Image?
Satisfied with the solid construction.
Was the installation difficult?
Wiring was not very clear and I had to short it and Fuse jumped.
How was your experience with it?
It is quite bright and could be a little more Compact.
[Included Parts:were they on?
as described
[Was there anything that disappointed you?
A lower price would be appreciated.
Fuse flew during Lighting Check.
It might be a good idea to prepare Fuse in advance for installation.
View detail
Moderately Small
The size is moderately small and easy to use.
MT07 fitment is attached, but it can be installed as long as there is an M8 hole.
Note that the wiring is ultra-thin wiring and the available Bullet Terminal is smaller than the normal Bullet Terminal.
Wiring processing is required.
View detail
Fits: YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-07, YAMAHA MT-09
of good quality
The product itself is very solid and not cheap looking.
Since it is installed in a place where it cannot be seen, I am not particular about its appearance, but it can be installed with peace of mind.
The performance is fine and I expect it to be durable.
View detail
Fits: YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-07, YAMAHA MT-09
It is well made.
The product itself is very well made and does not look cheap at all. I am not particular about the appearance of the product since it is installed in a place where it cannot be seen, but I can install it with peace of mind. I have no problems with the performance of this product and I expect it to be durable. View detail
MT-07 with round eyes spec.
It is one of the options for those who want to make their MT-07 a round-eyed Spec.
Note that there are different types of Covers for different years.
Exclusive Design (same as XSR700) so it can be installed with Refreshing.
However, you need to modify the body side when you install it.
Arm holding the Harness of the Right Side near the with Handle interferes with the Cover, so bend it.
It is not so difficult if you do it with Pliers, but be careful not to break it.
Harness handling needs to be moved a bit to fit somewhat.
And the color of the Harness on the Body side is different from the Harness on the Headlight side.
Harness is not waterproof, so you need to waterproof it accordingly.
Color:Unpainted, has some BALI and dents. You can't see it from a distance even if you put it on as it is.
I left it in the hands of a PRO painter and had it beautifully matted Black.
The Instruction Manual is entirely in German.
If you have the ability to handle the above to some extent, I think you can install it without any problems.
If the above is difficult or you don't understand it, ask Shop or other people to help you.
View detail
Fits: YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-07, YAMAHA MT-09
The Headlight area is neat.
This is the Front Blinker I bought when I made my MT-07 into a SCRAMBLER Custom.
It contains a pair of Blinkers and a Heat Shrink Tube.
Jvb has a Harness for YAMAHA motorcycles on the market and you can install it without any care.
I processed it with Bullet terminal.
Heat Shrink Tube is done with a heat gun, but I shrunk it by burning it with Burner of the CD can so that it may not become a direct fire.
It will be an LED Blinker, so the OEM Blinker relay will not work correctly.
An external LED compatible Relay is required.
I'm ↓ so it's working correctly.
https://www.webike.net/sd/24232608/
Relay is easy to replace.
Installation position is under the handlebar of the front brake and clutch lever.
Co-tighten the Nut on the Handlebar side.
Quantity:Pair (for Left and Right) In a sense, it's safe to say that you can't put it on by mistake because the shape is different.
I don't think there are any problems with light intensity or visibility.
View detail
Style is outstanding.
It is one of the options for those who want to make their MT-07 a round-eyed Spec.
Note that there are different types of Covers for different years.
Exclusive Design (same as XSR700) so it can be installed with Refreshing.
However, you need to modify the body side when you install it.
Arm holding the Harness of the Right Side near the with Handle interferes with the Cover, so bend it.
It is not so difficult if you do it with Pliers, but be careful not to break it.
Harness handling needs to be moved a bit to fit somewhat.
And the color of the Harness on the Body side is different from the Harness on the Headlight side.
Harness is not waterproof, so you need to waterproof it accordingly.
Also, the only way to adjust the optical axis is to use the screw to fix the body.
If you loosen it too much, the Body will rattle, so you'll have to tighten it up by adding a Rubber Washer or collar.
Color:Unpainted, has some BALI and dents. You can't see it from a distance even if you put it on as it is.
I left it in the hands of a PRO painter and had it beautifully matted Black.
The Instruction Manual is entirely in German.
If you have the ability to handle the above to some extent, I think you can install it without any problems.
If the above is difficult or you don't understand it, ask Shop or other people to help you.
The style is outstanding, so please give it a try.
View detail
Small but bright.
Universal M8 Screw Size LED Blinker.
It contains a pair of Blinkers and a Heat Shrink Tube.
Jvb has a Harness for YAMAHA motorcycles on the market and you can install it without any care.
I processed it with Bullet terminal.
The structure is simple and I think it can be installed without any problem even if it is not YAMAHA.
Heat Shrink Tube is done with a heat gun, but I shrunk it by burning it with Burner of the CD can so that it may not become a direct fire.
It will be an LED Blinker, so the OEM Blinker relay will not work correctly.
An external LED compatible Relay is required.
I'm ↓ so it's working correctly.
https://www.webike.net/sd/24232608/
Relay is easy to replace.
Of course it is just fit for Fender Eliminator Kit of the same manufacturer.
View detail