Reviews
Replace from dark 4.5Inch
The light bulbs were changed to LEDs and the brightness is perfect.
Flat lens is the best for parenthesis.
View detail
HURRICANE Mini Blinker Kit
The delivery is fast and the quality is good. I recommend it because it has good cost-effectiveness. I'm so satisfied with the clean exterior that I feel good. Recommend. Thank you. View detail
good!
At first, I didn't know how to install it. However, there was a manual inside, so it was easy to install. It was a little hard. If you look at it a little, you'll be able to install it completely View detail
Easy to install
Installed on a 2021 YAMAHA BOLT Shoulder Bag.
Since it was dedicated to the model of the car, I was able to install it without any particular difficulty.
To match the car body, we painted it Matte Black by ourselves.
View detail
Fits: YAMAHA TW225E, YAMAHA TW200E, YAMAHA TW200
It's a little lumpy.
I was wearing a delicate bracket for Bates, but it was ruined by vibrations, so I went to HURRICANE.
The bracket is a pedestal type, so it is firmly fixed.
TWs and single-cylinder engines vibrate a lot, so if you have a slender bracket, it will break.
I've had no problems at all since I started using this.
good point
The light intensity is small but sufficient.
The Bracket is the base, so it is firmly fixed.
Light's Wiring, etc. are also nicely organized.
The quality of the plating is also good.
This is not a problem at all.
The vibration can loosen the parts, so it is essential to fix them firmly and strongly.
View detail
Fits: YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA TW225E, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW200, YAMAHA TW200, YAMAHA TW200, YAMAHA TW200, YAMAHA TW200, YAMAHA TW200, YAMAHA TW200, HONDA SL230, YAMAHA BRONCO, YAMAHA SEROW225
It is resistant to vibration.
This is the Bracket of Front Blinker.
The blinker blinks more regularly than before because it is more solidly built than other companies' blinkers and is fixed firmly. The blinker now blinks more regularly than before. Since it is a single cylinder engine, the vibration is more likely to be caused by the large size of the engine, which makes it easier for the parts to come loose. The bracket should be large enough to hold it in place.
good point
Securely fixed.
The background music is beautiful.
It is also strong in Rust.
The blinker is not just a point that needs to be held in place.
View detail
Fits: KAWASAKI 250TR, HONDA APE 50, HONDA APE 100 TypeD, HONDA APE 100 TypeD, HONDA APE 100, HONDA APE 100, HONDA APE TypeD, HONDA FTR223, HONDA CB223S
I bought it because of the replacement of headlight STAY.
I bought it because of the replacement of headlight STAY. I bought it because I wanted to use a genuine winker. It fits well without any problems and it's good that the look I wanted came out the way I wanted it's good! View detail
Replaced with the same etc. product because the NORMAL bulb was broken.
I bought this as a for replacement for my 12V10W Blinker Valve that ran out.
Installed on SEROW225 (WE).
Because it is not LED and it is a NORMAL substitute, the price per 1pc. made it to this cheapest in Webike.
In mass merchandisers, Quantity:The price was about the same for 1pc. so I think the cost is good.
Since it is 1pc. that I exchanged this time, I will keep the rest as Spare.
I thought about changing to LED, but I had to replace 4 Relay+Valve, and it's a 90's Motorcycle… so I decided to forgo it this time and keep the STD Blinker and use regular bulbs.
View detail
Fits: KAWASAKI 250TR, HONDA APE 50, HONDA APE 100 TypeD, HONDA APE 100 TypeD, HONDA APE 100, HONDA APE 100, HONDA APE TypeD, HONDA FTR223, HONDA CB223S
Not a problem for Bracket.
[How is it used?
I removed the OEM Meter Bracket from my 250TR and needed to relocate the Blinker, so I bought one.
Was the one you received as per Image?
It's Bracket, so I don't have that many requests, but it does have a slightly cheaper look to it.
Was the installation difficult?
It's easy to install on the Bolt under bracket.
How was your experience with it?
I relocated the Blinker and have no particular problems.
If you tighten it up, it won't come off.
View detail
Thank you for the delivery.
I haven't installed it yet, but I'm happy that it's delivered safely. I'd like to leave anywhere if I could imagine a w800 that would fit well. If the delivery is a little late because the webike is out of stock, the delivery will not be too late! View detail
Fits: YAMAHA DRAGSTAR1100Classic, YAMAHA DRAGSTAR400 CLASSIC
It's a bit pricey...
[How is it used?
Exchange from NORMAL
Was the one you received as per Image?
*Image Street
Was the installation difficult?
It's not easy.
How was your experience with it?
You can enjoy the change of style.
[Included Parts:were they on?
We have everything we need to do the exchange...
[Was there anything that disappointed you?
The blinker on the front side has too short a wiring.
Other items that would be helpful
It is better to prepare the terminal crimp which can connect Wiring.
View detail
MINIBlinker kit
It is only for CB223 and installation was easy.
Compared to NORMAL, it's nice and clean.
If there is one problem, if you use the included Blinker Bulb as is, it will blink too fast.
I went back to the NORMAL ball and things are back to normal.
View detail
Other than the way it looked, it was a disappointment.
I bought this to Refreshing the look of the product.
As expected, it looks better, but the quality is not good, the lens is foggy and Rust occurs soon, so I returned to OEM. I think the price is too high for the quality.
View detail
Fits: YAMAHA TW225E, YAMAHA TW200E, YAMAHA TW200
The thing is certain.
I chose the Bates Headlight for my trucker custom.
Even though it is a fashion product, I wanted to make sure that it was visible and I wanted a product that was easy to install.
good point
It is small, but the function as light is enough. It is quite bright.
Bracket and Wiring are also Quantity.:It is easy to install because it is set.
The texture of Plating is good.
It's an Exclusive Design model, so it definitely looks good.
I think it's cheaper than I thought.
A bad point
● No, I don't.
The light became the first small, and it became the front circumference that was refreshed.
View detail
Simple and Parenthesis is good.
I was looking for a Small Type Blinker and I found POSH product. It was easy to install. View detail
Fits: YAMAHA TW225E, YAMAHA TW200E, YAMAHA TW200
Bought this because it looks good.
I bought this product because it looks good and it was easy to install from OEM light. View detail
ได้รับสินคัาครบถ้วน ถูกต้อง ดำเนินการจัดส่งรวดเร็วดี View detail
For OEMs and Fenders
The FTR 223 I bought is so thin that when I stepped in puddles, I got dirty on my back, so the Rear Fender is a must-have item. View detail
This is required when replacing it with an external blinker.
This is the Bracket, Plate or Adapter that you will need to change from the OEM Blinker.
At worst, you can replace it without it, but it will have a hole in the mounting area, which makes it look quite unappealing.
The price is very low for a dedicated product and the quality is not very flattering, but the cost performance is excellent.
View detail
no problem
I'm not too picky about the Blinker Bracket, so I bought one from a trusted brand. I did.
The product was exactly as I imagined.
The texture isn't great, so I think it's just right that it's hidden behind the Number.
View detail