Reviews
Fits: HONDA DIO FIT, YAMAHA JOG, YAMAHA JOG Zr, YAMAHA YV50 Z II, YAMAHA JOGREMOTE CONTROLLER, YAMAHA Axis Treat125, SUZUKI ZZ, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI LETS II, SUZUKI LETS IIL, SUZUKI LETS IICombination brakes, YAMAHA JOG, YAMAHA JOG Zr, YAMAHA JOGDX, YAMAHA JOGPetit, YAMAHA MATE50, YAMAHA MATE50D
No problems so far.
I just wanted to White the Light, so this cheap Valve is sufficient. View detail
It was worth the price.
I was a little disappointed because it was an Image that glowed a little brighter.
Well, I can barely see Meter, so I'm going to use it as is for now.
View detail
Slim impression
I purchased these to install on my 2014 S1000RR.
The second model has been replaced by a narrow LED blinker, which is also attractive in its own right, but we wanted to make the most of the SS design, so we decided on this less conspicuous product.
The installation itself is completed only with Torque and +Screw.
Instruction is also clear and Quantity:Pair (for Left and Right) There is also an indication so you will not make a mistake.
However, since it is LED, high flasher will occur. I don't mind it that much, but those who care about it may be bothered.
Well, when you are on it, you can't see it because it is a very Compact Blinker.
Note that the Crimp on the Connector and wire may be a little weak and may come loose. Be careful when attaching and detaching.
View detail
Fits: Others
LED MeterLamp on TS185E that can be cut immediately
[Usage]
Since the OEM Product's bulb went out after about 1,000 km, we replaced it with this product to reduce the frequency of replacement.
Comparison with OEM Product
OEM (09471-12077-000)
Light intensity:LED diffuses light on the surface, so it looks brighter on a single body, but after attaching to a meter, it is about the same level.
Cost:6.5 times OEM.
(Points to note)
LEDs are polarized, so be careful about the direction of installation.
【attachment】
Easily replaceable by simply plugging it in.
View detail
Fits: KAWASAKI Z1000, KAWASAKI Z250, KAWASAKI Z800, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZX-6R, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA250R, KAWASAKI Z1000, KAWASAKI Z250, KAWASAKI Z800, KAWASAKI NINJA400R
The calm coloring and classical atmosphere are good!
Quantity:1 Set of 2pcs. so Quantity:I bought 2 sets
Installation is no problem, but since the Screw holes are not cut, it would be better to fit them properly and turn the Screw carefully when installing. It took about 15 minutes for four pieces.
I was satisfied with the dark, subdued color as per Image.
View detail
Used on ninja250
ninja250 (2015) It was installed with the company's 65029 at
The low side is connected using the included White colored Electro Tap. No on/offSwitch was installed since there is no vehicle inspection.
I was a little dissatisfied that I could not do wiring without cutting into the headlight unit, but I am generally satisfied with the brightness and parenthesis after installation.
View detail
Used on ninja250
ninja250 (2015) It was installed together with the company's 65030 at
I was a little dissatisfied that I could not do wiring without cutting into the headlight unit, but I am generally satisfied with the brightness and parenthesis after installation.
View detail
Fits: MOTOGUZZI CALIFORNIA, APRILIA Scarabeo250, APRILIA Scarabeo200, APRILIA PEGASO650 STRADA, HARLEY-DAVIDSON VRSCD V-ROD NIGHTROD, KAWASAKI KLX250, KAWASAKI GPZ400, SUZUKI volty, SUZUKI volty, SUZUKI Across, SUZUKI SV400, SUZUKI RGV250 (Gamma), SUZUKI RF400, SUZUKI GSX400, SUZUKI GSX-R1100, SUZUKI DF200, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA XZ550, YAMAHA XZ400
Purchased due to Headlight Bulb running out
I purchased these because the bulbs were out. The Pine Stripe bulbs were as bright as I expected.
It's also inexpensive, so it's helpful.
View detail
Fits: HONDA SUPER CUB 50 Custom, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 Street Specification, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB Custom, HONDA SUPER CUB DELUXE, HONDA PRESS CUB 50 Standard, HONDA PRESS CUB 50 DELUXE
Not special, ordinary is good enough.
Standard valve, so the brightness is close to NORMAL.
I thought about switching to LEDs, but I didn't think the cost performance would be that good, so I settled on Halogen bulbs.
I feel that a 20th century motorcycle would not look good even if it were converted to LED, so I am satisfied with this.
View detail
So bad
Unfortunately, the Pin was in the wrong position and could not be installed. It was a waste of time. View detail
Made in Japan for peace of mind
There are plenty of cheap Valves out there, but Valve almost always uses M&H Mats Stripe. I don't remember Trouble until now.
G18 BA15S, but the Valve tip is Lens-like and it is supposed to emit a sharp light.
I certainly feel that way.
Made in Japan.
View detail
Exactly with exclusive products
Used in Touring Main and a little bit in Circuit.
It has protected my Light without coming off.
I now understand why many R1 riders put it on.
View detail
Sure, it's bright, but...
Used for Cub Pro (JA10).
Installation, but Controller does not fit within Light.
It will be installed outside.
It was installed under the FrontBasket.
I ran it and it does indeed brighten up.
However, there is a mysterious light on the Left. This is for oncoming cars and people.
It is thought that it will be dazzling, so I put a Tape on the Headlight.
We made it harder to get out.
The brightness is good, but the light scatters, so that was Minus.
Caution should be exercised by those who are concerned about oncoming illusions.
View detail
Fits: SUZUKI GRASS TRACKER, SUZUKI VOLTY, KAWASAKI 250TR, Others
Satisfied
I purchased this product to relocate the Blinker when converting to Separate Handlebars. I am satisfied with the quality and feel. View detail
Blinker I just switched from a 10w to an 8w bulb and it doesn't blink.
Simply remove the OEMRelay and install the Mukawa Relay in the same way.
I appreciate that it also comes with two different Adapters.
I would appreciate it more if the price was more affordable!
View detail
It is made of aluminum diecast and has a very good texture!
I looked for the dimensions at the time of purchase, but could not find them clearly, but they were listed on the back of the box when I received it. It seemed a little smaller than what I was expecting.
It is made of Aluminum Diecast, so the texture is quite good. The brightness when lit is also perfect.
It is very good for those who are looking for a Simple form that is not sequential. Recommendation.
View detail
No longer a standard product
The Poly sports headlight has become a staple of Offfor Vehicle headlights.
Similar products are sold at low prices on Amazon, etc., but I have the impression that the difference in price is directly connected to the difference in quality.
In addition to the Rubber Mount that wraps around the Fork, two types of Brackets for adjusting the Headlight position are provided for installation.
View detail
Off-road standard
good point
It seems to be small and unbreakable.
Maintenance is also easy, since the corresponding Valve can be purchased at Home center. (W number confirmation required)
A bad point
Single Bulb, so depending on the year, position modification may be required.
Bullet Terminal has Female and Male, so Large Mortgage Wiring needs to be processed.
Blinker relay in md44 must be replaced
Parts used
12 v10w13tValve×4
POSH Blinker Conversion Coupler Code Hondafor Front (18-19CB1300SF/SF-SP) ×Quantity:1pc.
UniversalSmall Signal High Speed Switching/Diode 1N4148 100V200mA ×4Co
Sumitomo Wiring Systems, Ltd. 050-type HCSeries2-poleFConnector2P050-HC-OR-F-tr ×Quantity:1pc.
Sumitomo Wiring Systems, Ltd. 050-type HCSeries2-poleFConnector2P050-HC-SB-F-tr ×Quantity:1pc.
Sumitomo Wiring Systems, Ltd. 050 type 1 pole F-side Connector1P050-WH-F-tr ×2co.
POSH) Motorcycle accessories Wide watt blinker relay (LED compatible) 3-wire Type 090011-WR ×Quantity:1pc.
Nut or Bolt, RubberWasheretc., number required
The included Valve is 12v8w10t and a little dark, so I changed it to 12v10w13t. The Valve generates a lot of heat, so I think you should inspect it carefully.
Front Blinker's Connector is "Made in USA" and I couldn't get it from Wiring.com.
For position processing, a rectifying diode is inserted in the position line and the turn signal line to prevent reverse current flow. If this is not done, the Indicator will remain on all the time.
I bought all the connectors for the rear blinker from Wiring.com. plus side connectors are in KITACO's ConvenienceParts, but minus side is not available.
The Rear bracket is a Fender Eliminator Kit from DRC, and the Front bracket is an appropriate Bracket that I found at Home center. I was surprised to find that it hooked up EXACTLY.
Blinker relay must be replaced. rally's blinker relay is for LED, but there is information that DRC's LEDFlasher is high flasher, so I thought I could use unbreakable lens with low w number, but it was not possible. I bought a used OEMRelay for md38 and it is a high flasher. It is better to buy ICRelay.
Posh's Blinker relay has a waterproof body, but the connector is exposed and needs to be treated. I wrapped it with tape from Vinyl housefor Repair.
View detail
Fits: HONDA CT110 HUNTER CUB
It's nice to be able to put it on with a snap.
Because I am using Headlight's Coupler with USB power supply.
I was looking for a Fog Lamp that could be powered from another location.
I found this item.
The only thing I have to modify myself is the Bullet Terminal for the ACC power supply.
Wiring according to the Instruction Manual is all that is required to complete the installation.
Power consumption is 60W and Large
It is used during Idling and at low RPMs.
Sounds like you're overloading Battery.
One Side2500lm brightness (Other Manufacturers are about 800ml) Is
Very reliable when driving on pitch-dark country roads and mountain passes.
Both rugged appearance and free mounting position are appreciated.
View detail
Fits: HONDA CBR600RR, HONDA CB400 SUPER BOL D'OR, HONDA CB1300 Super Four, HONDA CB1300 SUPER BOL D'OR, HONDA CB400 SUPER BOL D'OR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR
It did not work for crf250rally.
Purchased when replacing crf250rallyBlinker.
However, it did not fit the Front Blinker….
The fit is this way.
POSH Blinker Conversion Coupler Code Hondafor Front (18-19CB1300SF/SF-SP)
View detail