Reviews
Fits: HONDA DAX, HONDA CHALY 50, HONDA MONKEY, HONDA GORILLA, Others , HONDA DAX70, HONDA CHALY 70, HONDA ST90 (ST90)
Commonly usable
Blinker relay of 6VMONKEY was broken, so I replaced it with this one. There is no particular problem, but the unique clinking sound of the blinker is gone, which is Minus. View detail
Fits: HONDA little cub, HONDA Super Cub 50, HONDA Super Cub STD-92 (12V model), HONDA Super Cub STD-92 (12V model)
Don't expect quality.
I had a headlight unit from another company attached to my LITTLE CUB, but after more than 10 years of use, the plating was peeling, so I replaced it.
The installation itself was not a problem, but the Socket does not seem to be durable.
I installed it at the end of September 2023 and from the beginning of December 2023 the Headlight started flickering occasionally and a few days later the Headlight disappeared while driving and became completely unusable.
I suspected that the Valve was out of ballast and tried to remove it, but for some reason it would not come off. When I pulled it out by forcibly turning it with pliers, I found that the Socket had melted. The melted valve had lost contact with the valve, and the resin was further burnt.
Since the price is reasonable, I think it would be better to use OEM products like Large for Socket and Valve, with Socket and Valve as extras.
View detail
Fits: HONDA APE, HONDA CUB, HONDA MONKEY, HONDA MONKEY
Poorly made, poor contact
I have used it several times and it is almost certain to have poor contact.
Spring is weak, Lamp side contacts are poorly made, and terminal height is different between hi and lo.
Do not buy this product as it is completely useless and cannot be reworked.
HondaOEMSocket also has many defects, but OEM is better.
View detail
Fits: HONDA APE, HONDA CUB, HONDA MONKEY, HONDA MONKEY
there is a problem
However, the base material of the contact point with the Valve is the same transparent resin as that around the Connector, so there may be a problem with the heat resistance of that part, or it may have melted into a sludge and deformed, making it unusable.
The period of use was about six months for weekday commuting use.
Since the OEM was a Black resin material only in that area, I assume that a heat resistant material was used there.
I assume that this product has a delicate Spring function that presses the contacts together or the contacts attach and detach, generating heat, which the material could not withstand.
Just before the damage, the Light was on and off due to vibration.
The contact point on the Valve side had also been cut off in the shape of the Socket side terminal at the Center contact point, probably due to poor adhesion caused by the Spring function.
The spring was stiff at the time of installation, and after installation, it was as if the spring had shrunk to the point of having no stroke.
We are now using OEM and have no problems, so we have decided that OEM is the way to go, even if it is more expensive.
View detail
Recommended
Buy Plating
It's not in bad condition and I recommend it!
View detail
Fits: HONDA ST90 (ST90), HONDA CHALY 70, HONDA DAX70, Others , HONDA CHALY 50, HONDA DAX, HONDA GORILLA, HONDA MONKEY
Recommended
Inexpensive. Well made.
Recommended!
View detail
Fits: HONDA DAX, HONDA CHALY 50, HONDA MONKEY, HONDA GORILLA, Others , HONDA DAX70, HONDA CHALY 70, HONDA ST90 (ST90)
Blinker with excellent cost performance
Orange colored sphere on transparent Lens with good visibility of reflector.
Wiring is also made easy with a Bullet Type Terminal attached to the tip.
You may need to be a little careful about how much you tighten the fixing nut.
View detail
Fits: HONDA APE, HONDA CUB, HONDA MONKEY, HONDA MONKEY
No wonder the price is so low.
When I installed the OEM parts, the low beam light came on without any problem. I installed the OEM parts and the low beam lit up fine, but the spring inside was weaker than the OEM parts and the contact seemed to be faulty. I guess it is because the price is so cheap. View detail
Not exactly what it was originally intended for.
Although it is not the original purpose, the spring of the stand switch interferes with various external parts installed, so I bought it to let it go.
It can be used just fine when co-tightened in the Footpeg Bracket hole under the Engine.
View detail
Fits: HONDA dachshund, HONDA Shirley 50., HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA Shirley 70
quality for the money
I purchased this product to use as a multi-reflector, but when I received it, there was an error in the dimensions of the Rim and Lens, so the Lens was uneven and there was a gap between the Rim and Lens. Also, the positioning protrusion of the Valve insertion part has a gap, which seems to be fine for Halogen bulbs, but when the LED Valve is installed as it is, it is tilted against the pattern of the reflector.
So I managed to install it by modifying it in various ways. I think the quality is good for the price.
View detail
Fits: HONDA Super Cub 50, HONDA little cub, HONDA Super Cub STD-92 (12V model), HONDA Super Cub STD-92 (12V model)
I'm just...
When first installed, Lo did not light up.
Switching Valve to something else did not help.
I switched back to the NORMAL terminal and it was perfect.
The rest of the Screw holes are slightly out of alignment.
Well, because it looks good.
View detail
Fits: HONDA APE, HONDA CUB, HONDA MONKEY, HONDA MONKEY
It was damaged after 8 months of use at 4000 km Meter.
I purchased it because it was less expensive than OEM Parts, and installed it. However, the gold material at the contact point with Valve melted, and I could not use it after 8 months. The cause is unknown, so I will purchase again. View detail
Fits: HONDA MONKEY, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Three stars because I don't know the OEM.
I bought a used MONKEY, can't say for sure since I don't know the OEM shape of the color, but I thought it was well made. View detail
Fits: HONDA ST90 (ST90), HONDA CHALY 70, HONDA DAX70, Others , HONDA GORILLA, HONDA MONKEY, HONDA CHALY 50, HONDA DAX
Parenthesis is nice in chic shades, but …
[How is it used?
I wanted to change to an old car style headlight, and on the other hand, I wanted a multi-reflector type headlight, so I purchased this headlight, which was also inexpensive.
Was the one you received as per Image?
As you can see in the Image, the Headlight is a Beauty.
Was the installation difficult?
Just by replacing the original Headlight, the Lens can be removed with 2 Screws and the Body can be removed with 2 Screws on the Bracket, but it is Large strange to have to redo the Wiring.
I am patient and persevering, thinking that I won't have to change it so much.
How was your experience with it?
First, it is clearly brighter than the NORMAL and KITACO Headlight.
Visibility is good and I can drive safely at night, partly because I switched to a high-efficiency Valve.
[Included Parts:were they on?
Valve included.
[Was there anything that disappointed you?
There are three disappointing Points.
The first is that Light case is Material:Since it is plastic, vibration shattered the holes in the Rim mounting Screw.
Second, the light lens is turning yellowish due to sunburn.
Third, the plating part is prone to rust, and if you do not keep polishing it, you will not be able to remove the rust.
I ended up replacing the light case, but I am thankful that there are Repair Parts for the case only.
View detail
Thank God Repair Parts is there!
[How is it used?
I wanted an old car style Multi Reflector Headlight, so I bought a Black Type Headlight, but the Screw hole in the Rim was shattered by vibration, so I bought it as Repair Parts.
Was the one you received as per Image?
I changed to Plating for a change of pace, but it is shiningly good and parenthesis is good.
Was the installation difficult?
No way, no way, no way. After redoing Wiring many times for the third time, I was able to connect Wiring without having to leave a picture of it anymore.
Please do not imitate if you are a first timer. (Lol)
How was your experience with it?
It is a good Headlight, brighter than the NORMAL and KITACO Headlights.
However, I think the Case is made of plastic and is weak.
[Included Parts:were they on?
Unlike the HeadlightAssy, nothing is included.
[Was there anything that disappointed you?
There is an unfortunate Point that has not changed.
The first is that Light case is Material:Plastic, so it will eventually crack from vibration.
Second, the quality of the plating on the case is poor and will become dull after use, so it must be polished.
▼ So far, but I have managed to keep it without cracking. If it cracks next time, I'll switch to something made of Gold, although Rust will continue to plague me…
View detail
Fits: HONDA DAX, HONDA CHALY 50, HONDA MONKEY, HONDA GORILLA, Others , HONDA DAX70, HONDA CHALY 70, HONDA ST90 (ST90)
indicator
Cost performance is excellent, but there is a possibility that the lock pin may come off when subjected to impact.
For everyday use, it may be a problem.
View detail
Diversion to 6VCHALY
Used to convert 6V square eye CHALY to round eye.
There was a gap between the OEM Meter and the Meter, so you may be able to use the Meter Rubber from Minimoto to hold the Meter in place. I used 3DPrinter to make the color.
The Valve of the Headlight is a shape that I have never seen before, and I built in Marshall's Headlight because both Reflector and Lens are Plastic. I made a bracket with 3DPrinter and fixed the bottom two points with screws.
CaseBody was solid, not Plastic.
View detail
Fits: HONDA Cub C50, HONDA Cub C65, HONDA Cub C70, HONDA Cub C90, HONDA Cub C50, HONDA Cub C65, HONDA Cub C70, HONDA Cub C90
The more the old car feels like an old car
It is a Large-gauge cannonball Type Blinker that was used for Kamome CUB and others.
for Rear.
Not only is it highly visible, but it also has a cute back view.
Installation is only a matter of replacing the Rear blinker unit and wiring, which is integrated into the blinker bracket.
good point
The old car feeling is intensified and austere.
Visibility is perfect.
BracketWiring is also a Quantity:Set, so it is pontooned.
I like Plating's finish.
A bad point
●As a precaution, the Rear Blinker's Wiring runs through the Reverse side of the Rear Fender, so do not damage the Wiring.
There is a slight hassle in installation, but I think the finish is quite satisfactory.
It gives off the atmosphere of an old Motorcycle.
View detail
Fits: HONDA Cub C50, HONDA Cub C65, HONDA Cub C70, HONDA Cub C90, HONDA Cub C50, HONDA Cub C65, HONDA Cub C70, HONDA Cub C90
CUB looks like CUB.
It is a Large-gauge cannonball Type Blinker that was used for Kamome CUB and others.
They say a lot of things about Degeme Gold and so on (laughs).
It is not only more visible, but also closer to a Retro look.
Installation is only to replace the Front Blinker Unit and Wiring.
good point
The large blinker is conversely fashionable.
● Visibility is quite high.
Unit, as well as Wiring, is Quantity.:Set, so it is pontooned.
The construction is not bad.
The trend in the world is toward small size, but I dare to say that large size is fine.
Visibility will increase, it will be stylish, and it will be Retro.
View detail
Fits: HONDA MONKEY, Others , HONDA DAXetc.
Great buy
Nice oem style blinkers , chrome was great, good quality , great fitment for the model I am building being a 6 volt system, I am building a lady Dax st70 and these are the correct style for the model , this was the only place I could source them. Definitely a good recommendation for someone looking for these from me! View detail