Reviews
Suitable for many car models, comes with mounting brackets. clear sound View detail
Good!
Thank you for always delivering good products safely and quickly. It's a good product. It's easy to install and the delivery is safe View detail
NORMALSR has a Large change in installation
I installed it for the purpose of replacing the OEM Product, but the Large was odd.
The supplied bracket was too short and could not be installed without removing the headlight, so we reused a bracket from an OEM product.
I had a hard time getting to the Reverse side of Light.
Incidentally, the OEM Product that was removed was also a NIKKO product. This product is also made by NIKKO, a long-established HornManufacturer in Japan, so there are no quality problems.
The sound is lower than OEM, but not bothersome at all.
I saw in some post that Plating is prone to rust, so I took measures with 6-66 Rust-Proof Spray.
I can't complain because it is a Universal Product, but be careful when installing on SRNORMAL vehicles.
View detail
Installation is Large-Format
Replaced with OEM Product.
I did not remove the Headlight and it was Large strange.
The bracket that came with the product was too short to fit in my hands, so I removed and reused the bracket from the OEM product and somehow managed to install it.
I am satisfied with the appearance.
Incidentally, the OEM Product was also made by NIKKO, and this product is also made by NIKKO, a long-established Horn manufacturer in Japan, so there is no doubt about its quality.
The sound is lower-pitched than OEM, but I don't mind.
I can't complain because it is a Universal Product, but be careful when installing on SR NORMAL cars.
View detail
sound good
Delivery is fast and I am very satisfied with the product. I have ordered so many products from Webike. However, these high-quality and in good condition products are really reliable. We recommend this product to those who love and like bikes. Reliable product, fast delivery, I am very satisfied with the result. I am very satisfied. I will order again and trust. Thank you. I love you. I will order today. Delivery is fast and I am very satisfied with the product. I have ordered so many products from Webike. However, these high-quality and in good condition products are really reliable. For those of you who love and love bikes, Now I recommend this product. Reliable product, fast delivery, very satisfactory results I like it very much I will order again and trust thank you Love it I'm taking orders today View detail
Plating looks good on American.
I installed it on DragStar250.
The bolt holes on the bracket that came with the kit were too small to fit, so I used the original bracket that came with the kit and installed it.
The work was done in about 10 minutes.
The Shiningly look of Plating suits American very well.
The size is a little larger than the OEM Horn, and the presence has been increased.
View detail
Beautiful Plating Horn
I haven't messed with the W800 lately, so I used PetitCustom and set Horn to Plating I saw it
photo1
It's a beautiful horn, but I sprayed Rustproof Spray because Rust is supposed to come out
Picture 2
Comparison with OEMs
Large size is 93mm compared to 82mm for the OEM Two thin brackets are included but they are not compatible with the W800 due to their shape
Picture 3
The OEMHorn is rubber-mounted, but it is not long enough for the screw length Remove the rubber mount and fix it directly to the OEMBracket
The length of the connector is just right
Picture 4
After installation, from before Left
Photo 5
After installation, from the Right front
The sound quality is almost the same, and the volume seems to have gone up slightly
Depending on the mounting position, it's not very noticeable, but it's one point, so I'm glad I changed it It is
In terms of design, I think it fits the W800 If the price was a little lower, it would be Recommendation
View detail
attachment
NORMAL's Horn did not complain, but I replaced it with Plating's Horn according to the Retro car body!
The installation was a little Large strange, Nut was 8 mm, but the hole of the fitting part was 6 mm, so I asked the person holding Drill in the neighborhood and opened the hole to 8 mm and it was possible to install it ! Sounds are satisfied with a slightly lower sound than NORMAL's high sound?
View detail
Excellent Classical atmosphere!
I installed it in the W650. First of all I like Classical looks. There is also firm presence. It is unexpectedly higher than this Horn if you are investigating other Classical Mirror in various ways. Made in Taiwan's common cheap Horn will only look something like that. In other words, I think that Horn from posh here is expensive for a moment, but I think that it is satisfactory when considering the appearance and COSPA.
The performance of Horn is also quite nice!
View detail
He has no complaint! A price is also cheap and structure is also good. Although attached to SR400, on the motorcycle of that hand, I think that it matches well truly. when you would like to change from an authentic positive one, it is infallible n
He has no complaint! A price is also cheap and structure is also good.
Although attached to SR400, on the motorcycle of that hand, I think that it matches well truly.
when you would like to change from an authentic positive one, it is infallible now -- it is -- !.
View detail
Since the tone color of a pure horn did not not much have liking appearance, it purchased by appearance. Although a tone color is touch called such thing kana -- well, appearance is self-asserted very well.
Since the tone color of a pure horn did not not much have liking appearance, it purchased by appearance.
Although a tone color is touch called such thing kana -- well, appearance is self-asserted very well.
View detail
It is use attachment time to YAMAHA VOX. 10-minute attachment is simple and convenient only by removing a side cover and a front cowl and exchanging for the horn of normal. As a vibration proof measure, in my case, the rubber board was put and it adde
It is use attachment time to YAMAHA VOX. 10-minute attachment is simple and convenient only by removing a side cover and a front cowl and exchanging for the horn of normal.
As a vibration proof measure, in my case, the rubber board was put and it added it between ways.
Since my car body was unified with black and silver, a shiningly and the shining plating tightened the front view further from the hole of the cowl of a front.
Sound-volume tone quality is the same as the normal horne of an ordinary motor vehicle.
It is thought that it is a fairly loud sound in case of a motorcycle.
Although there is no opportunity to sound a horn from the first not much, an automobile partner also thinks that he is the amount of audible sound perfectly.
They are recommended items which tighten one step of looks and also whose safety is also increasing!
View detail
It is very good for a horn to be plated. When attaching to sr, it may change by a model, but since it cannot attach to 2007 models as it is, some processings are needed. Moreover, since no oscillating measures are taken, please carry out by yourse
It is very good for a horn to be plated.
When attaching to sr, it may change by a model, but since it cannot attach to 2007 models as it is, some processings are needed.
Moreover, since no oscillating measures are taken, please carry out by yourself to take oscillating measures.
View detail