Reviews
It picks up Noise.
I thought I knew what ShiftTiming was even without the Tachometer.
The re-acceleration is inevitably slow in the SCENE that requires climbing the board.
I purchased it to keep track of RPMs.
While retrofitted, the position and Size are moderate, and the high brightness makes it easier to read than the OEM Speedometer.
However, the Clutch Cable runs through the Shift Up Indicator position, so it is not visible when the driver is riding. (I guess it depends on your body shape …)
Also, as is common with retrofitted tachometers, the rpm may rise or fall by around 500 rpm during cruising.
The performance is sufficient for me as I only needed to know the approximate number of revolutions.
I was able to correct my riding style because I was SHIFT UP at lower rpm than I expected.
The installation is more difficult because the tank needs to be lowered.
The illustrated Instruction Manual is clear and helpful and manageable.
However, although not a problem with this product, we had two problems during installation.
1. OEM Speedometer BracketMounting Bolt stuck at an angle.
It is fixed by biting into the Blinker Bracket and Meter Bracket.
The Bolt on the Meter Bracket was stuck at an angle, making it difficult to replace the Bolt.
(It's mainly Honda's fault since it's due to individual differences in the car body.)
2. occupies the power supply for Attachment (+ voltage shortage may occur)
The power supply for the Attachment provided on the Brake Side is used.
Already incompatible with USB power supply and Cigar socket.
The same thing happens when I make the connections as per the Instruction Manual, but
While the Cell is spinning, it seems to run out of voltage and reboots (re-opens).
The Harness length is long enough to reach the bottom of the Seat even through the bottom of the Tank.
I modified the Wiring to take power directly from Battery and it improved.
The voltage display function compares the voltage at the time of wiring according to the Instruction Manual with the voltage at the buffer.
The voltage seems to be slightly lower in the former. (It is not the fault of this product, but the spec. on the car body side.)
The following products were used for the Wiring change.
KIJIMA:ACC Branch Harness Kit]
https://www.webike.net/sd/21317023/
DAYTONA:Attachment Power Supply Unit D-UNITPlus]
https://www.webike.net/sd/24232600/
View detail
Relief
I bought it because it was inexpensive. It is a good product and easy to read for a small size. View detail
A little disappointed
They arrived in good time as usual when buying parts from Webike, I am a bit dissappointed the covers are not shiny and chrome looking like the picture, they are gray dull colour :( View detail
DAYTONA MeterFilm CBR600RR
The installation position is Exactly, high quality, and I am satisfied with it. View detail
Fit to Off car without Tachometer
I purchased this unit because I wanted to know the Engine RPM when I converted my WR to MOTARD. The installation required the connection to the Accessories power supply that supplies power when the key is turned on, the Pulse wire of the Engine before it enters the ECU, and the connection to the ECU. (I think it was the Orange line.) I wanted to add ETC at the same time, so I installed OEMY's Gear's Harness kit and got ACC from there. Harness and connectors are located in the space in front of the ECU under the seat. The meter is not bad, although the indicator is not so easy to see. The RPMs are now visible and I feel more secure in turning it all the way up. View detail
Air bubbles unavoidable
I bought for 2023 Honda Rebel 1100 - The package comes with 2 set of film of both lens (round odometer and half moon shape engine light), package comes with instruction and the material of the film is good maybe too good of the thickness. (I’ll explain below), I have done film, carbon film wrapped and window tinting myself, this odometer film should be simple and easy as instruction said: 1. Alcohol wipe. 2. Peel half the back sticker and spray with water, 3. Apply to the sticker onto lens and spray water then peel off the back sticker. 4. Use a film squeegee push out the water and air within. Unfortunately, I wasted both set not able to 100% eliminate air bubble, no matter what there is at least 30% air still capture within and if you try too hard you’ll damage the film, I believe the quality of those film it’s too thick couldn’t able to squeeze properl, I even let it sat under the sun for 2 days hopefully it’ll take off the bubble it still remain the same amount… If you not looking for perfection then this might work for you, but I can’t stand the bubble ended peel them all out and threw it in trash. I think for over $15 this should be a nice and easy to use products, is not worth the money. View detail
Fits: KAWASAKI ELIMINATOR, KAWASAKI ELIMINATOR SE
It was difficult.
As per other impresarios, it was difficult to stick it on Beauty.
Quantity:The 1pc. eye was in a cruel state and immediately popped.
The second one did not pull the air bubbles out well, but if I continue to re-stick it, Quantity:I gave up because it was in the same condition as the 1pc. eye.
It is functional and will stay that way.
View detail
Fits: KAWASAKI ELIMINATOR, KAWASAKI ELIMINATOR SE
It was difficult.
I had seen other people's impressions and thought it would be difficult, but I still failed.
Quantity:The first pc. fails miserably; the second one is a disappointing failure.
I am using it as it is, but I think it is better than nothing.
View detail
Co-tightened to Left SideMirror!
I have been making my own bracket for my Digital meter, but this time I bought a ready-made bracket, which is stronger and of higher quality than the one I made myself. It is better to buy it than to go through the trouble of making it myself. View detail
Universal meter mounting bracket - using it for Yoshimura Progress-2 multimeter
Simple but very practical meter holder. I'm going to use this for the Yoshimura Multimeter Pro-gress2. got the left side to install on the left handlebar. since the yoshimura meter is black, i have also chosen the black colour mounting bracket. View detail
Difficult to see in bright light
Hard to see in bright light.
Why not just use a regular LCD (with Black text)?
Even though it is a very small current, it drains Battery and no clock function is needed.
I used a very old Digital tachometer of this Type for almost 20 years,
Purchased because it finally ascended.
I took it apart... ・
It had been flooded for a long time. Copper was precipitated and Blue.
View detail
Not only the installation performance, but also the satisfaction with the appearance is great!
[How is it used?
Used to install water temperature warning light LED (made by DAYTONA) when replacing Meter on DT200WR.
Was the one you received as per Image?
Beauty is as per Image. The sturdiness exceeds expectations!
Was the installation difficult?
It is not difficult as it is only tightened with Bolt! 。
How was your experience with it?
I thought about using Home center's straight Bracket, but the subtle banana shape was Good.
[Included Parts:were they on?
Not originally.
[Was there anything that disappointed you?
I'm satisfied
View detail
The performance and texture are GOOD!
[How is it used?
I was looking for a Universal Product because my DT200WR Meter broke down and could not be repaired any more, so I chose DAYTONA's Meter because of its performance and reliability.
Was the one you received as per Image?
Just like DAYTONA's Image (I have been using it since the Scooter days), from the packaging of the parts to the waste-free and reliable, in a good way. I knew it. I knew it. I knew it. It was
Was the installation difficult?
The information about Wiring (color and type of Wiring), which I thought would be the most confusing, was clearly indicated, so I had no problem at all.
How was your experience with it?
Very easy to see, I wish I had replaced it sooner." I felt strongly that
[Was there anything that disappointed you?
I am not disappointed, but it is about the brightness of the LEDs.
Blue brightness." is OK because of the high brightness, but the Meter lighting makes it appear to be lit.
Other items that would be helpful
View detail
It looks and performs great!
[How is it used?
I used it as a water temperature warning light when I replaced the Speedometer on my DT200WR with an after-market Meter because it was not working properly! 。
Was the one you received as per Image?
Exactly the same as the photo on the web, Solidly built, CustomMaterial." It was
The LED and Wiring connections were also handled well, giving a sense of reliability for the components.
Was the installation difficult?
LED polarity on Package +/-" The "What is the best way to get the best out of the product?
The installation was done with DAYTONA's Bracket, so there were no problems at all.
How was your experience with it?
Since it is a water temperature warning light, it does not normally come on (and we don't want it to!!!). ), we connected the Water Temperature Sensor's Connector to GRAND and tested its operation, and it lit up perfectly.
[Included Parts:were they on?
Included Parts:None 。 Body only.
[Was there anything that disappointed you?
Worked as expected. 。 I would venture to say that it is for the Red color warning light, so I would like it to light up a little brighter.
Other items that would be helpful
View detail
Sturdy and beautiful
[How is it used?
Used because the OriginalMeter of DT200WR was broken. used for DAYTONA's Meter installation.
Was the one you received as per Image?
More than as per Image. It was described as polished Stainless Steel, but it is just beautiful.Image-wise, the whole thing is on the shiny side of Polished Aluminum foil.
Was the installation difficult?
It was not that this part was difficult to install, but because we used DT's MeterMounting Bolt, we had trouble adjusting the Speedometer Cable routing to match the actual one. In the end, it is OK.
[Included Parts:were they on?
Included Parts:is not available.
[Was there anything that disappointed you?
Not at all.
Other items that would be helpful
View detail
Not only the installation performance, but also the satisfaction with the appearance is great!
[How is it used?
I installed this after my DT200WR Meter failed. I am very satisfied with the workmanship as expected!
Was the one you received as per Image?
It was not a straight Bracket, but a beautiful curved part! 。 Since it is a PRESS product, the texture of the back and front are different, but I don't mind.
Was the installation difficult?
Installation is not difficult because the bolt clamps the bracket and washer, but care must be taken to prevent the bracket from turning during the final tightening.
How was your experience with it?
Performance and beauty are as expected!
[Included Parts:were they on?
It is not original,
[Was there anything that disappointed you?
Not at all. 。 I was thinking of using Universal Bracket, but I am glad I did.
Other items that would be helpful
At first, It's Bracket, so it's a little expensive." I thought. Precision of workmanship, texture." And I'll be using it from now on. In terms of, I'm glad I bought it I am very happy to be able to help you. You won't regret it!
The appearance of the PRESS punching differs between the back and the front (gently/edgily), but both are clean, so this is not a problem.
View detail
It comes in handy in many ways
I put it on for break-in and to know the power band. The exhaust sound will give you a sense of the RPMs.
Parenthesis is good and I like it. (*p∀p)
View detail
Shift indicator flashing is fun!
After comparing tacho meters from several companies, we decided to purchase this product because the memory display range is in the normal RPM range and the number font was cute. I had watched YouTube before I purchased it, and I was able to install it without any problems, following the instructions provided. At first, I selected "Quantity" from the Brake switch harness.:I installed the 2-pc cord that was not 12V and the Tacho Meter did not respond. I reattached it and the Tacho Meter responded immediately. I had checked the video in advance to see which side of the cord to install the Tacho MeterWiring on, but it seems my Motorcycle was the other way around.
After the trial run, the smooth movement of the hands and the Red blinking of the ShiftIndicator lifted my spirits.
I was thinking that the tacho meter was shaking due to vibration, and one of the bolts was missing from the tightening bolt. I remembered that I had left the bolt lightly hand-tightened, so I bought a M5×20 bolt at Home center, and now it is good without any shaking.
I wish they would have made the Taco Meter a Standard Equipment from the start, but that's where the fun of messing with it comes from. I hate Honda.
View detail
Great product
Got the parts super fast, easy and quick install. Nice product works great, in fact I ordered three of them, one I kept the other two were for my Monkey friends. The only issue I had was the parts went on sale the day they were shipped, but customer service would not give me the sale price. I was given extra points instead. View detail
Can be attached to a '23 GB350S.
We installed it on a 23 year old GB350S.
I was worried about 60φ, but I decided to use 48φ with a view to making Separate handle in the future.
Was the one you received as per Image?
As shown in the Manufacturer's reference image.
Was the installation difficult?
The car model-specific Bracket and instructions are included, so I think it is possible if you follow the instructions.
Personal,
I didn't know that the Lens had to be disconnected because of the wiring connection inside the Headlight.
Ignition coil terminal connections are narrow and difficult to make.
I was concerned about these two points, but it was not enough to require special work, so I thought it was fine.
If you are concerned, you should check the optical axis after the work is done.
How was your experience with it?
I knew this, but it is hard to see the MeterSize as Small.
However, Rev limitWarning can be set, and with usage and familiarity, it can be managed.
Also, Response is worse than I expected.
It may not be suitable for those seeking performance commensurate with the Gold amount.
Durability is unknown as it has only been installed for a short time.
View detail