Reviews
Fits: YAMAHA XSR900, YAMAHA MT-09 SP, YAMAHA MT-09
Size doesn't fit?
I don't know if the size is Large or if the meter is bad, but it keeps floating away, so there are always air bubbles in it. It is better than nothing. View detail
Cut is inaccurate.
I don't need the spray bottle included, etc., so I want it to be cheaper and more accurate. View detail
Fits: SUZUKI V-Strom 650, SUZUKI V-Strom 1000
Even if Size is past Limit….
The film is hard and fits in the MeterSize Limit. I managed to install the film, but after washing the car, the film started to float when I blew off the water droplets with a compressor.
I stuck it again, but I am not sure about its durability. Is the size still not right?
View detail
Fits: SUZUKI Hayabusa
To prevent scratches
Like the Smartphone, I bought this to prevent scratches. I found it as difficult to apply as smoked film on a car. Of course it is effective, but I would like to know how to apply it easily and beautifully. View detail
Air bubbles unavoidable
I bought for 2023 Honda Rebel 1100 - The package comes with 2 set of film of both lens (round odometer and half moon shape engine light), package comes with instruction and the material of the film is good maybe too good of the thickness. (I’ll explain below), I have done film, carbon film wrapped and window tinting myself, this odometer film should be simple and easy as instruction said: 1. Alcohol wipe. 2. Peel half the back sticker and spray with water, 3. Apply to the sticker onto lens and spray water then peel off the back sticker. 4. Use a film squeegee push out the water and air within. Unfortunately, I wasted both set not able to 100% eliminate air bubble, no matter what there is at least 30% air still capture within and if you try too hard you’ll damage the film, I believe the quality of those film it’s too thick couldn’t able to squeeze properl, I even let it sat under the sun for 2 days hopefully it’ll take off the bubble it still remain the same amount… If you not looking for perfection then this might work for you, but I can’t stand the bubble ended peel them all out and threw it in trash. I think for over $15 this should be a nice and easy to use products, is not worth the money. View detail
It is covered with scratches.
Installed to protect the Meter panel.
It is unfortunate that Film is so easily scratched and the line scratches are all over just wiping off the dust.
I would like to see an improvement in the Material to make it less vulnerable.
View detail
Fits: KAWASAKI H2 SX SE, KAWASAKI H2 SX, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000GX
It's not cost effective
It is an old type that is difficult to put up for the price, and you have to pour water on it to remove the air. It is hard to see in the picture, but a lot of air remained. View detail
Difficult to see in bright light
Hard to see in bright light.
Why not just use a regular LCD (with Black text)?
Even though it is a very small current, it drains Battery and no clock function is needed.
I used a very old Digital tachometer of this Type for almost 20 years,
Purchased because it finally ascended.
I took it apart... ・
It had been flooded for a long time. Copper was precipitated and Blue.
View detail
Fits: HONDA SUPER CUB C125
Spherical Panel support?
The first one was a failure, it was full of wrinkles and I threw it away immediately. the second one I pressed down slowly and radially from the Center positioning, but the air bubbles remained hard to see. It was more difficult than with a smartphone. I thought about peeling it off, but it was a waste, so I left it as it was. Would it be better to stick it with soapy water? View detail
Fits: SUZUKI Hayabusa
Meter panel
The product requires the same level of skill as a PRO to affix, and even a slight breeze when working outdoors can cause dust to stick to the adhesive and create air bubbles. View detail
Short warranty
About six months after installation, the Body began to turn on and off, and finally stopped working after less than a year.
I checked the warranty period and it is only 6 months. Is it a spec. that will break when the warranty expires?
I bought the same product and installed it, but I don't know what will happen.
View detail
Magical's Carbon parts are generally too expensive Image
Installation is as simple as covering and affixing on both sides.
The build, texture, and appearance are good, but the MagicalRacing sticker attached to the center was a little gapped, not in the center, and the way it was attached was messy. Unfortunately, I had to remove it because it looked bad because it had a wrinkle in it.
It was a very disappointing product, even though the product was not bad.
All of Magical's carbon parts are too expensive in general. I was a little bit disappointed.
Well, I lost faith in Magical after seeing the messy way Sticker pasted it! (Lol)
View detail
Fits: SUZUKI Katana, SUZUKI GSX-S950, SUZUKI GSX-S1000, SUZUKI GSX-R1000R L7
Construction is easy.
originally [Color] By applying the film, the clear screen will look like frosted glass.
It is my personal preference, but I thought it would be more Refreshing to cut out the Protection film from the phone.
View detail
I'm sorry
It may be an individual difference, but the accuracy is not very good. There is inevitably a gap.
Tape is attached to the reverse side from the beginning, but the adhesive is weak and does not stick.
I managed to install it by adding another Tape.
Although not shown in the product image, there is a seal by magical attached under the meter panel.
The price is 20,000 yen, which makes it an iffy product.
View detail
Fits: HONDA NC750S, HONDA NC750X, HONDA Integra
Difficult to apply without air bubbles.
It is difficult to position the meter and to apply it well without air bubbles.:1pc. Fail and waste anymoreQuantity:1pc. was somewhat Gapped but not after, so the position was compromised. Considering that, this pricing is not very satisfactory. it might be enough to cut out and make it on the Universal Protective Seat with my own pattern paper. View detail
Screen failure
After owning the Koso mini 4 tachometer for only 18 months and using for less than 9 months the screen has failed. I would have expected more from a reputable manufacturer. View detail
Fits: YAMAHA XSR900, YAMAHA MT-09 SP, YAMAHA MT-09
I want to get it right...
Since the film is flimsy, it easily deforms and bubbles can form in the area.
Also, the film on the main panel is slightly large, so the edges are inevitably raised.
A glare film is included, but this is not recommended for safety reasons as it makes it difficult to see the Meter.
It is a little better to buy a cheap Film from Amazon (Side Panel Film is Large here...).
View detail
Fits: SUZUKI V-Strom 250, SUZUKI GSX250R
I wonder if it's a problem with the "Skills"...?
Products are available in unglazed and glazed quantities:1 Set of 2pcs. One is a VERSION in 6 languages, and it describes how to dry install, but I tried but could not remove air bubbles. I tried but could not remove the air bubbles.:The 1pc. instruction manual English VersionVERSION had a translation (enter here for Wet installation instructions) at the bottom of the first page on the back. I thought, "This way! I tried spraying a very small amount of neutral detergent in the water, but again, I could not get rid of the air bubbles. Moreover, the adhesive strength seemed to have weakened. I read that the air bubbles would naturally disappear after a few days, but after a few days, I went for a run. (Temperature 20°C, distance 150 km) I couldn't even get any sign of the bubbles going away at all. Is this a problem with Skills? View detail
Fits: KAWASAKI NINJA400, KAWASAKI NINJA650, KAWASAKI NINJA250, KAWASAKI NINJA1000, KAWASAKI ZX-25R, KAWASAKI ZX6R, KAWASAKI VERSYS-250X, KAWASAKI VERSYS-300X
It is very difficult to paste.
I thought it would be the same as applying Film to smartphone screens, which I do on a regular basis, but it was extremely difficult.
Cut's Size was right, so it would be effective if accompanied by technology, but …
View detail
Fits: HONDA VTR1000SP
I thought you might need it, but it was attached…………
Quantity dedicated to the model:The same thing was in the Set. View detail