Reviews
tw200
[How is it used?
Touring
Was the one you received as per Image?
yes
How was your experience with it?
good
[Points to note]
None
How did it compare to other products?
good
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Thank you
I removed the OEMLight & Meter Bracket when doing the LightUp, so I used this Bracket. View detail
Fits: TRIUMPH Scrambler 400 X, TRIUMPH Speed 400
A spare Film is also included for your peace of mind.
The size of the meter panel can be set to "Exactly" for easy operation. You can also have a spare quantity in case of failure.:It is safe because it comes in 1 pc. I have not been able to find the Meter panelProtection film anywhere else. View detail
Fits: SUZUKI GSX-R750, SUZUKI GSX750RR, SUZUKI GSX-R1100
M-TEC's Reprinted Parts
GSXR750 Oil Cooled Initial Model 1985s
OEMParts was discontinued and M-TEC re-released it with reissued Parts, so I bought it as StockParts. Thank you very much.
View detail
SP TAKEGAWA Meter Protection Film
About quality and texture - The product quality is great. About the feeling of use - Texture is sleek and smooth, almost feel like glass but its just a film. Difficulty of installation - Very easy install. I was very suprise when I installed the film because my meter display was full of scractches/swirls marks and after installation, I was shocked to findout that it literrally hides the scratch/swirl marks i had on my meter display. Just look at the images i provided, my meter looks brand new. View detail
KITACO Speed Pulse Conversion Unit (Installed on JC92 U.S. Spec.)
About quality and texture - Quality is ok. Difficulty of installation - Installation was easy. About shipping and packaging - Well packed and secured. Any concerns, cautions, or advice when purchasing - Only concern i had was getting to the setting mode and i couldn't get it to power up. On instruction manual the Optional Connector is actually what powers up the device to get to setting mode. My grom is purchased in the U.S. it may be different with the Japan spec. as i couldn't find the power supply connector harness on my bike. I was able to just tap the power supply through the rear lighting and got it to power up and set up to my bike specs. View detail
Fits: SUZUKI RV200 VANVAN, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER Big Boy
meticulous manufacturing
It was good up to the point of installing the Coupler on the body side of the NORMALIndicator with the Coupler, but the remaining Black color code was installed with Tap for Connection and the Instruction Manual's Sky blue code. The sky-blue code is used to connect to the Quantity:There are 2 pcs and the first connection failed, but I opened the Tap and connected it to the dark sky blue cord and it lit up fine. View detail
It's really just a dress-up.
As Title
When you look at the Meter when you're in the middle of a
It is a Recommendation for Carbon lovers because it is in your eyes.
I'm sure there aren't.
I'm thinking that the Meter Lens part also has a clear plastic.
I'm afraid you're making an unfortunate mistake.
I literally bought it as a Cover.
There is nothing in the Lens portion.
The installation was left to the store when the car was inspected.
BOLDOR 2009.
View detail
Fits: KAWASAKI ZZR250, KAWASAKI ZZR250, KAWASAKI ZZ-R250, KAWASAKI ZZ-R250, KAWASAKI ZXR250, KAWASAKI ZXR250, KAWASAKI ZZ-R250, KAWASAKI KR-I., KAWASAKI KR-1R, KAWASAKI ESTRELLA
OEM Product has been discontinued.
I bought this because I thought the speedometer was probably out of cable because it stopped displaying the speedometer. At first, I tried to purchase a Kawasaki OEM Product, but it was out of stock, so I was wondering what to do. After disassembling the unit, I found that the Cable was also out of order, so I replaced it with this one and the Speedometer worked fine. View detail
Fits: HONDA CB400 Super Boldor, HONDA CB400 Superfor, HONDA CB400 Super Boldor
feeling of being tightened
The panel is simply affixed to the meter, but the gold color around the black meter stands out and makes it look tighter.
I am very satisfied with the product, although it is not visible from the exterior, so it is a self-satisfying product.
View detail
Fits: SUZUKI GSX750, SUZUKI GSX750 , SUZUKI GSX750 , SUZUKI GSX1000S, SUZUKI GSX1100S, SUZUKI GSX1000S, SUZUKI GSX1100S
KATANA SPEEDO NEEDLES
I recieved the Katana speedo needles quicker than expected and it arrived in a well protected package. Once I get some free time I will install them. I was so impressed with the service that I did not hesitate to order another product. Thanks! JOHNNY "B" KATANA View detail
Fits: HONDA CB750, HONDA CB750L (license training vehicle), HONDA CB750L (license training vehicle), HONDA CB750L (license training vehicle), HONDA CB750, HONDA CB750, HONDA CB750L (license training vehicle)
To MAGNA50.
Cheap!
Fast arrival!
Good texture!
No complaints!
View detail
No problem, no problem, no problem
There is no wobble and no problem. View detail
Relief
I bought it because it was inexpensive. It is a good product and easy to read for a small size. View detail
An accessory should be mounted on the vehicle
With 125cc models produced by Hona in recent years. The vehicle's display clock often does not show engine rpm or battery voltage. These two things lead to disadvantages when using a motorbike, especially the voltage problem when the battery is weak, we cannot monitor the exact voltage index at that time. With this OPMID meter, the above disadvantages are resolved, the meter clearly displays rpm as well as the current voltage of the battery. The special thing about OPMID compared to other watches is that it has a touch screen that can interact very sensitively. From there, it makes adjusting parameters much easier and faster. View detail
Stress resolution at stoplights
When connecting to the Ignition coil, you need to pull out the original cable and insert it into the Ignition coil, which requires a lot of force.
The wiring routing from the side box used the hole at the bottom of the box, not the hole indicated in the Instruction Manual (Honda seems to have changed the routing spec. for the existing wiring. (Honda seems to have changed the existing wiring routing spec. and the wiring could not be routed.)
For the Attachment to be attached to the Handlebar, we had prepared a different Manufacturer's Installation Base, but the Included Parts:was pretty solid, so we are using it as is for now.
View detail
very good
This is a part that can be easily installed. It also shows high satisfaction compared to the price of the parts and the difficulty of the installation work. The painting and quality of the product are perfect.About quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasing View detail
Fits: SUZUKI GSX1100SY
It was diverted to Type 3 KATANA.
Since there is no OEM/external cable for the 3-type KATANA, this product for Final with the same shape at both ends of the cable was diverted.
The Cable length is slightly shorter, but so far it has been working fine and has been very helpful.
Since the internal wire can be pulled out from the Cable end on the Wheel side, it must be properly greased up before installation.
View detail
Fits: HONDA CROSS CUB50, HONDA CROSS CUB, HONDA CROSSCUB110
Tachometer for Motorcycle
The OEM CROSS CUB 50cc does not have a Tachometer, which I discovered in my search.
The CROSS CUB50cc is a 4Cycle, so it was displayed correctly without any setting changes, although it can be made to display correctly in 2CycleEngine and other engines by changing the settings.
There are other types of Tachometer made by Mukawa, but this product is simple enough to display the Rev limit in addition to the RPM.
The Rev limit can be changed by operating the button on the reverse side. The OEM Rev limit for the 50cc CROSS CUB is 9000 rpm, so I set it at 8500 rpm to be on the safe side.
The Yellow Lamp lights up before the set 500 rpm and the Red Lamp lights up at the set rpm.
The Instruction Manual also states that if this product is installed, the display may come off if a Fog Lamp or Ignition coil from another company is installed.
Other items in the photo are KIJIMAHandlebar Mount Bracket, NeoFACTORY 48mm Voltage Meter White Panel Stainless, Eye PRO ShiftIndicatorAPH8 Red
View detail
Fits: HONDA MONKEY125, HONDA DAX125, HONDA CT125CT110 HUNTER CUB
KITACO Meter Protective Film
It was good to find a quality product that was simple to install. I will buy it often in the future. Thank you for the meticulous packaging and sending. View detail