Reviews
OEM Product and Exchange
[How is it used?
Used for HORNET250; Meter needle was shaking, so it was replaced at the same time as OEM Product's Joint.
How was your experience with it?
So far, it has been used without any noticeable drawbacks or problems.
How did it compare to other products?
I think we can say OEM Product same etc.
[Points to note]
When replacing the HORNET meter cable, it is necessary to remove the tank, so some knowledge and tools are required.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI GPZ900R For Malaysia Market, KAWASAKI GPZ900R For Malaysia Market
Elegant quality. Inexpensive. Fast.
[How is it used?
While running, the Speedometer suddenly stayed at Zero, and when the Cable was removed, it was replaced because it was twisted off.
Chose this one because the OEM is discontinued and not sold.
Was the one you received as per Image?
Yes
Was the installation difficult?
No, sir.
However, it is difficult without any work experience at all, such as the need to remove the Meter.
How was your experience with it?
Normal. Perfect.
Very Smooth rotation.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Other items that would be helpful
You can choose to do so with complete peace of mind.
With this Cable, you can ride all the way.
View detail
Fits: KAWASAKI ZZ-R1100, KAWASAKI KLE400, KAWASAKI KLE400, KAWASAKI KLE500
OEM Parts Substitutes
I ride it mostly for commuting. KLE250." But I was looking for an OEM Product because my Cable ran out.
But I can't find the OEM, so... KLE400." Purchase this product, which can be used in
After receiving it, he immediately took it to Motorcycle shop for replacement.
I thought what if the Cable seemed to sag, but it is Large sturdy even after driving 150km since the replacement.
View detail
Fits: HONDA VTR, HONDA VTR, HONDA VTR, HONDA VTR, HONDA VTR
You might need a Washer.
If the cable is attached as it is, the cable and GEAR will not be attached vertically.
You might want to bite the Washer etc.
View detail
Fits: HONDA CB900, HONDA CB900, HONDA CB900, HONDA CB900, HONDA CB900, HONDA CB750F, HONDA CB900, HONDA CB900
It went out fast.
After I bought it new, it was cut off in less than 1000km.
It is broken at the border of Wire and Bracket part.
I have purchased several of these and this is the only one that has broken. Was it a fluke? I don't know if it was a fluke or not, but I trust NTB and I'm disappointed.
I'd like to buy it again to check (is it an individual item?).
View detail
Fits: YAMAHA TZR50R, YAMAHA Renaissa (RENAISSA), YAMAHA TZR50R
To YamahaRENAISSA
I replaced the meter cable when I replaced the speedometer on my YamahaRENAISSA, I didn't need to replace the meter cable but I just did. View detail
Fits: HONDA VTR, HONDA VTR, HONDA VTR, HONDA VTR, HONDA VTR
OEM Looks
[How is it used?
The VTR250 that I prepared to start Gymkhana.
Because it was the vehicle which was too cheap and was too battered, I thought to do maintenance before running for the time being, but it became fun to do maintenance custom, and I had to replace Handlebar & rarr;Meter cable and various cables. I had to replace the Handlebar & rarr;Meter cable.
Since the vehicle is not yet assembled, I'm giving it a 3 for now for durability.
I'm hoping to finish it up so I can ride it before 2019 warms up and Corona settles in.
Was the one you received as per Image?
OEM friendly looks.
I could have chosen something with a custom look, but I couldn't resist the ease.
Was the installation difficult?
I also replaced the headlight, so it was a little difficult to pull the cable around the top bridge.
Still, they fit together nicely.
How was your experience with it?
As I mentioned above, I haven't gotten it running yet because it doesn't have the security parts on it.
The original 2 that I started at the same time is finished earlier than the original 2, so even if I finish it, it might become a Gymkhana-only machine.
[Was there anything that disappointed you?
There is not. Even if there was, it is only a story that it is possible to put up with MONSTER S210 book.
View detail
Fits: HONDA GORILLA (GORILLA), HONDA GORILLA (GORILLA), HONDA GORILLA (GORILLA), HONDA GORILLA (GORILLA), HONDA GORILLA (GORILLA), HONDA GORILLA (GORILLA)
Meter started dancing!
Because the needle of the speed meter began to dance with GORILLA of Z50J (6V latter term 3.1PS), I purchased it. After exchange, the display of Meter also stabilized and was able to recover safely. View detail
Fits: KAWASAKI ZEPHYR (ZEPHYR), KAWASAKI ZEPHYR (ZEPHYR), KAWASAKI ZEPHYR (ZEPHYR), KAWASAKI ZEPHYR (ZEPHYR), KAWASAKI ZEPHYR400χ (ZEPHYR)
Sturdy, normally used Large.
I ran out of meter cable on my 2002 2-stroke VINO.
I replaced it with a cheap Cable of CHINA, but Meter does not work …. When I replaced it with the Cable of NTB of this place again, in spite of cheapness, the making is also firm and performance. The surface is turning meter without any problem at all. I think that's enough.
View detail
Fits: KAWASAKI ZZ-R1100, KAWASAKI KLE400, KAWASAKI KLE400, KAWASAKI KLE500
Good as an OEM alternative (lol)
On the Wheel side of the OEMMeter cable, the film behind the reinforcement of the Gold metal was cracked I could see the wire (sweat)
Because the fork moves up and down, it seems to put strain on it
This is an OEM compatible product, so the meter side and the meter next to the wheel in the case of ZZR Just take it off the gear and replace it!
If you're on the ZZr, you'll know that the Screen and Meter panels It needs to be removed
My ZZr is the last model and after about 20 years, the OEM feels like it's been screwed
This product is inexpensive, and I wonder if it's enough to last 10 years
View detail
Fits: SUZUKI Lets5G (LETSFive G), SUZUKI Lets5(LETSFive), SUZUKI Lets5G (LETSFive G), SUZUKI Lets5(LETSFive), SUZUKI Lets5G (LETSFive G), SUZUKI Lets5(LETSFive), SUZUKI Address V50
She's been gone for less than two years
Meter suddenly stopped working?
Meter cable came off? I had the same symptoms before and could still use it, but I traded it in for this new Cable
Checking the front tire, I found a scratch on the Cable hull near the front tire..
When I removed the cable, I found that the wire inside was broken
The OEM Product was usable for nearly 10 years, but this Cable was less than two years old... hmmm... no good Colyer
View detail
Fits: SUZUKI Lets basket (LETS Basket), SUZUKI Lets(LETS), SUZUKI Lets G (LETS G), SUZUKI ADDRESS V50 (Address), SUZUKI Lets basket (LETS Basket), SUZUKI ADDRESS V50 (Address), SUZUKI ADDRESS V50 (Address), SUZUKI Lets (LETS), SUZUKI Lets (LETS), SUZUKI Lets basket (LETS Basket)
Installed on an ADDRESS V50
Speedometer Cable on my son's ADDRESS V50 at 5,000 kilos
I used this product because it was out of stock It was in stock and arrived quickly It works fine
View detail
Fits: HONDA SUPER CUB 110 (SUPER CUB), HONDA SUPER CUB 110 (SUPER CUB)
OEM Parts for Repair
The meter cable of suker CUB110 JA07 is broken As it is, Meter won't work;
Not enough to buy an OEM, so NTB handled it Installation is only a replacement, no problems, and the meter works fine!
View detail
Fits: KAWASAKI ZrX-II, KAWASAKI ZrX-II, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S For Malaysia Market, KAWASAKI ZRX1200S For Malaysia Market, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1100, KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZRX, KAWASAKI ZRX, KAWASAKI ZRX, KAWASAKI ZRX
That's enough
I didn't run out of Cable, but I did notice that the Meter was shaky when I was running
I haven't replaced it for a long time now, so I thought I'd try a new Cable for now and replaced it
OEMs take a lot of time and effort to purchase, but this one can be purchased as soon as it's in stock
The length and shape are the same as the OEM, so there are no problems with installation at all
I've been running around normally for over a year since I replaced it and it's been perfectly fine
It doesn't have to be OEM Parts at all
Wouldn't it be safer to feel free to replace it before it cuts off?
View detail
Fits: YAMAHA SR400, YAMAHA SR400, YAMAHA SR400S, YAMAHA SR400S, YAMAHA SR500S, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400
Just installed
It's made in Japan It's a good choice for sharp SRs I don't feel the uneasy feeling that some countries' products are made in Japan, but it is possible to replace it with just one pliers Recommendation View detail
Fits: HONDA XR250 Motard (MOTARD), HONDA XR250, HONDA XR250, HONDA XR400 Motard (MOTARD), HONDA XR250R, HONDA XR250 Motard (MOTARD), HONDA XR250R, HONDA XR250R, HONDA XR400 Motard (MOTARD), HONDA XR250R, HONDA XR250R, HONDA XR250R, HONDA XR250R, HONDA XR250R, HONDA XR250R, HONDA XR250R, HONDA XR250R, HONDA XR250R, HONDA XR250R, HONDA XR250R
no problem
Purchased instead of OEM Product.
Off-road vehicles are Sus Stroke large Large wire gets Large Kicks but there is no problem at all.
Grease up is essential as the initial stage was only Oil of rust prevention.
View detail
Fits: HONDA SUPER CUB (SUPER CUB), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA SUPER CUB 50 BUS (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB 50 DX (SUPER CUB), HONDA SUPER CUB 50 STD (SUPER CUB), HONDA SUPER CUB 50 STD (SUPER CUB), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB)
no problem
I was able to install it to SUPER CUB 90 without problem.
Length was also the same as OEM.
Although it is not a fixed memory, the price feels like a price with no difference between the time when you purchased Inner alone with HondaWING and before the price.
View detail
Fits: KAWASAKI BALIUS-II (BALIUS), KAWASAKI BALIUS-II (BALIUS), KAWASAKI BALIUS-II (BALIUS), KAWASAKI BALIUS (BALIUS), KAWASAKI BALIUS (BALIUS)
Satisfied
Cost performance is satisfactory because it can be purchased cheaper than OEM.
I am worried about durability because it is outside of OEM but it seems I ran around 400 kilometers in one month
I think that it is nothing like OEM.
View detail
Fits: HONDA JADE SLASH S (JADE SLASH S), HONDA nighthawk 250 (Night Hawk), HONDA JADE (JADE)
The height of Quality
Currently used SpeedMeter cable has run out for Repair
I bought it. According to product information, OEM same etc. of
With Quality up to OuterBoots on Meter side, Length, thickness etc.
It is the same shape.
NTB from OEM Parts Number
It is inexpensive yet good quality, so it will be helpful at the time of purchase!
View detail
Fits: KAWASAKI ZEPHYR400χ (ZEPHYR), KAWASAKI ZEPHYR400χ (ZEPHYR), KAWASAKI ZEPHYR400χ (ZEPHYR), KAWASAKI Z250LTD BELT DRIVE (BELT DRIVE), KAWASAKI ZEPHYR 1100 RS (ZEPHYR), KAWASAKI ZEPHYR 1100 RS (ZEPHYR), KAWASAKI ZEPHYR 1100 (ZEPHYR), KAWASAKI ZEPHYR 1100 (ZEPHYR)
Mostly satisfied
Ordering of OEM Parts Number was awkward & ordering more Meter cable from others that I wanted to buy. There was absolutely no problem with Length and installation.
One thing I regret was that there was no RubberBoots on the Meter side that OEM had.. Since it was solved by porting from OEM, there was no problem of Large. I did not have to dispose of OEMCable at an early date.
View detail