Reviews
Fits: HONDA CABINA 50, HONDA CABINA 90, HONDA LEAD 100, HONDA JULIO, HONDA TACT, HONDA LEAD50, HONDA LEAD50, HONDA TOPIC, HONDA LIVE DIO ZX, HONDA LIVE DIO SR, HONDA LIVE DIO J, HONDA LIVE DIO S, HONDA LIVE DIO J, HONDA LIVE DIO, HONDA LIVE DIO, HONDA BROAD50, HONDA BROAD 90, HONDA DIOFIT, HONDA SUPER DIO XR, HONDA SUPER DIO ZX
Control voltage is too high.
After installation, I casually applied a tester to the battery and found that 16V was output!
I thought it was quirky and expensive, so I measured it and found that both Regulator and Battery
Idling (1600 rpm) The control was at 16V at 4000 rpm and 17.5V at 4000 rpm.
This is not usable!
Idling when I put it back in the OEM that I removed it from. (1600 rpm) The voltage was 14.5V at 4,000 rpm and 16V at 4,000 rpm.
Wasted... Worst of all...
View detail
Fits: YAMAHA BWS125 (Bewith), YAMAHA Cygnus X, YAMAHA BWS125 (Bewith), YAMAHA BWS125 (Bewith)
VINO125
The size and shape were the same, but a little cutting work was required, so if you have the tools, you can install it on the VINO125! View detail
I couldn't get it on right.
I was overconfident in myself, I thought I knew as much as Sunday mechanic, but I watched the video to prepare for the installation …Rear brake not working? I had to redo it several times. I have tried several times, but the Rear brake was not working and I gave up. I will try again after reviewing the same motorcycle riders, word of mouth, installation videos, etc. View detail
Fits: HONDA CABINA 50, HONDA CABINA 90, HONDA LEAD 100, HONDA JULIO, HONDA TACT, HONDA LEAD50, HONDA LEAD50, HONDA TOPIC, HONDA LIVE DIO ZX, HONDA LIVE DIO SR, HONDA LIVE DIO J, HONDA LIVE DIO S, HONDA LIVE DIO J, HONDA LIVE DIO, HONDA LIVE DIO, HONDA BROAD50, HONDA BROAD 90, HONDA DIOFIT, HONDA SUPER DIO XR, HONDA SUPER DIO ZX
No problem, but...
Coupler is a little bit small and a little bit tight.
At first I thought I had the wrong part number because it didn't fit.
View detail
No lights
[How is it used?
CHAPPY (CHAPPY) I bought the Blinker relay because the Blinker of the Blinker did not stick and the Blinker relay seemed to be no good.
I bought it trusting that it was for 6V, but as a result, I could not use it.
Was the one you received as per Image?
It was just like the picture.
Was the installation difficult?
No tools are required as it is simply a matter of removing and replacing the Connector in a position that can be touched from the outside.
How was your experience with it?
I don't know if it was not generating enough power or if it was an initial defect, but it did not work.
I thought it would not be possible to use the new one, so I did various TroubleShot and could not find the cause.
I thought it was impossible, so I replaced it with a Chinese 6V compatible Blinker relay, and it lit up fine.
[Included Parts:were they on?
It also comes with a Rubber Cover.
[Was there anything that disappointed you?
I bought it because it is 6V compatible, but...
【Review】
I was expecting it to be cheaper than Blinker relay, which is a No Brand product and handled by KN Planning, but....
I don't know the cause of the problem as it is my first time to touch a 6V car, but is it a power consumption problem or an initial defect? I can't use the Chinese Blinker because it lights up and this product doesn't light up.
View detail
Fits: その他 , HONDA LEAD, HONDA DIO system, HONDA TACT, HONDA Giorno
Compact
It is about 1/3 the size of the OEM Product and is perfect for fitting in a light case. View detail
Fits: HONDA SUPER DIO SR, HONDA SUPER DIO XR, HONDA SUPER DIO ZX, HONDA LIVE DIO S, HONDA LIVE DIO ST, HONDA LIVE DIO SR, HONDA LIVE DIO ZX
Received
Thank you for your prompt response. View detail
Front mask is tightened!
KN Project Front Blinker Cover (Light smoke).
The installation work was easy, and I was able to tighten the front mask easily.
Light smoke so Blinker visibility is not a problem. (See photo).
Since double-sided tape will be used to attach the tape, we recommend that the tape be degreased thoroughly.
View detail
Fits: YAMAHA SUPER JOGZ, YAMAHA SUPER JOGZ
Mouth Gold.
It looks the same as OEM Product and Large, but the slit at the mouth of Valve's Gold part is too thin to put Valve and Socket together.
Hard work.
View detail
Looks GOOD!
I purchased it at the same time as the Front Blinker part.
To install, simply attach it to the Body with Double-sided Tape and affix it to the vehicle body.
Front Blinker is the same, but the Fit is not quite right; Wobble is not, but there is a gap.
It looks GOOD, but the Fit feeling was not so good.
View detail
It looks good
[How is it used?
Town ride
Was the one you received as per Image?
It is not too dark at night on Image Street.
It looks better.
Was the installation difficult?
We used double-sided tape to affix it, but since there were no instructions on where to affix it, we affixed it where it would adhere best.
Additional double-sided tape was also applied.
[Included Parts:were they on?
Double-sided tape only, no Instruction Manualetc.
[Was there anything that disappointed you?
It's not so much that I need an instruction manual, but at least explain where to put the double-sided tape.
Also, the fitting is not good. It does not fit snugly and seems to float a little.
I guess I can't help it since I'm so focused on appearance.
View detail
Fits: YAMAHA JOG (2Cycle), YAMAHA Remote controller jog, YAMAHA JOG, YAMAHA JOGDELUXE, YAMAHA Axis Treat, YAMAHA Remote controller jog, YAMAHA Remote controller jog, YAMAHA Remote controller jog, YAMAHA Remote controller jog, YAMAHA JOG (2Cycle), YAMAHA JOG, YAMAHA JOGDELUXE, YAMAHA JOG (2Cycle), YAMAHA JOG (2Cycle), YAMAHA JOG (2Cycle)
It's like OEM, and the price is very low.
The last 2-stroke JOG instead of a foot Remote controller jog I purchased this product because one of the blinker lenses was broken at that time. I purchased this product because one of the blinker lenses was cracked at that time.
OEM parts are also available, but the price is more than three times different, so we have to settle for cheap products.
No modification is required for installation, and the venue is about 98% the same as NORMAL. If you look strictly at the BALI, there are some things such as the presence or absence of BALI, but there are no obstacles.
The color difference from the OEM was the same as the OEM for a quick look. The one that needed to be replaced was the one side, but this product is Quantity:Pair (for Left and Right) Therefore, the Quantity:Pair (for Left and Right) We also exchanged with
I can spare the NORMAL for the one that is available!
I want to make sure I don't fall and Repeat.
View detail
Fits: YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA CYGNUS X, YAMAHA CYGNUS X
CYGNUS-X Taiwan 5th stage is finally fully LED♪
[How is it used?
Touring and mainly city driving, with some night driving.
We had changed OEMTail to Smoked lens, and now the Rear blinker has become LED Blinker with this product.
The front blinkers were previously LEDs, so they were upgraded to front and rear LEDs.
Was the one you received as per Image?
Quantity:Pair (for Left and Right) The two blinkers are also wiring processed, so there is no need to replace the blinker relay when converting LEDs!
Double-sided tape is also included for easy installation.
Was the installation difficult?
In Taiwan 5th period, Tail is LED and Blinker is ValveLamp.
Valve is a member of the [Color] Clear, with OrangeCover attached with Screw, removed and installed.
A single screw in the middle and double-sided tape on the SIDE hold it firmly in place, so it will not rattle due to vibration.
How was your experience with it?
A sharp, LED-specific glow.
The sense of luxury has been improved.
The number of balls also looks good for rearward visibility.
The lens is used with a smoked lens and is clearly visible even in bright light.
I feel that the blinking lights are more vivid, and I feel that safety is improved when using the Blinker or Hazard lamps.
[Included Parts:were they on?
Two screws are provided for fixing.
There is no Instruction Manual, but just remove and install. It is easy to install.
View detail
Fits: YAMAHA Cygnus X Type 2, YAMAHA Cygnus X Type 2, YAMAHA Cygnus X Type 2, YAMAHA Cygnus X Type 1, YAMAHA Cygnus X Type 1, YAMAHA Axis Street, YAMAHA GTR AERO 125, YAMAHA GTR 125, YAMAHA Axis Street, YAMAHA GTR AERO 125, YAMAHA GTR 125
Speedometer is now working!
I purchased the Speedometer for my CYGNUS X 2 model that I use for commuting because it stopped working.
At first I replaced the Meter cable, but it did not work, so I used the Meter gear from KN Planning this time.
I was worried about OEM, but KN Kikaku had a lower price and more color variations, so I would like to purchase from KN Kikaku again next time.
View detail
Fits: YAMAHA CYGNUS X Type 1 5UAFOR JAPAN MODEL, YAMAHA CYGNUS X Type 1 5TY Taiwan, YAMAHA CYGNUS X 2 Type 28SFOR JAPAN MODEL, YAMAHA CYGNUS X 2 Model 4C6 Taiwan, YAMAHA CYGNUS X 2 Type 1CJ Taiwan
Speedometer Cable replaced!
I purchased this product because my CYGNUS Speedometer, which I use every day for commuting, stopped working.
The cost performance of KN Planning's Speedometer Cable is excellent, and I would purchase from KN Planning again.
By the way, the reason Speedometer stopped working was MeterGEAR.
View detail
Fits: YAMAHA Jog (2 cycle), YAMAHA Remote control jog, YAMAHA Remote control jog, YAMAHA Remote control jog, YAMAHA Jog ZR, YAMAHA JOG (5SU1-8), YAMAHA JOG (5SU1-8)
สวยงามทนทาน สินค้าตรงตามที่สั่ง ระยะเวลาในการสั่ง กับระยะเวลาในการส่ง ถือว่าไวมากๆ ถูกใจตามความต้องการ สั่งมาร่วม 20 ครั้งแล้ว สินค้าไม่เคยมีปัญหาใดๆ จะสั่งต่อไปเรื่อยๆนะคับ ขอบคุณมากคับ View detail
Cowl needs to be removed for installation.
It is installed on CYGNUS Glyphus.
Installation is a bit troublesome, as the cowl and front center of the meter need to be removed. It is safer to control the front and rear separately.
I chose Gold, but it is not visible even a millimeter because of the Rubber Cover that will arrive.
It is a recommendation because it allows you to cancel UBS without replacing the lever.
View detail
Fits: HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB70, HONDA SUPER CUB 50Custom, HONDA SUPER CUB 50
Cover for turn signal
I'm very glad they're on sale as the custom cub has a rectangular look and it's hard to find rectangular lights.
I ordered two, they fit perfectly. -------------------------------------------------- -------- I am very glad that they are on sale, since Custom Cub has a rectangular look and it is difficult to find rectangular lights. I ordered two at once, it suits perfectly. Powered by Google Translator
View detail
Required to unlock Combination brakes for BirdCity125
BirdCity125 (SEC-1J) I was not happy with the Combination brakes of the "M" and wanted to handle the front and rear brakes separately, so I recently did some research and the staff at the shop suggested that I might be able to find this product.
Combination brakes originally for CYGNUS Glyphus (The one that the Front also works when the Rear brake lever is held) I checked the part numbers in the Parts List and found that the BrakeEcoRiser for CYGNUS Glyphus 3 to 6 models and the '18 BirdCity125 are the same as the one for the CYGNUS Glyphus 3 to 6 models. (SEC-1J) BrakeEco Liza of (Parts ListNo.50) The parts model number was the same as that of the "I", so I thought, "Well, then, I can use it, can't I? I bought it.
There is no Instruction Manual, but the exchange procedure itself is Simple.
It was a bit tricky at the end because it was hard to put the lever pin back in.
After I finished assembling and gripping the lever, I was able to confirm the independent operation of the front and rear brake without any problems, but I had to grip it much deeper than before to make it work.
The capacity of OEMMaster Cylinder is 1/2, but I guess it is assumed to be Combination brakes.
I want to use BrakeSetting that works with Katsun, so my future plan is to replace the MASTER to increase the capacity.
In any case, I have to do it when I change to Brembo caliper.
If you want to dismantle the Combination brakes on your BirdCity125 and want to use neat parts, this is a good choice.
Nmax can also be used as long as the Parts model number is the same.
I don't know about ABSMODEL because my BirdCity125 is not ABS, so I don't know about the compatibility etc.
View detail
Fits: HONDA ZOOMER(Ruckus), HONDA APE 100, HONDA APE 50, HONDA GORILLA, HONDA GORILLA, HONDA JOKER90, HONDA JOKER Helmet, HONDA ZOOK, HONDA solo, HONDA DREAM50, HONDA Byte, HONDA MONKEY BAJA, HONDA MONKEY, SUZUKI ADDRESS V100, YAMAHA BWS100(BWS), YAMAHA AXIS 90, YAMAHA APRIO, YAMAHA APRIO, YAMAHA GRAND AXIS, YAMAHA JOG (2Cycle)
ไฟท้ายสีแดงสวยงามใช้งานได้ดี View detail