Reviews
Fits: SUZUKI GRASS TRACKER, SUZUKI VOLTY, KAWASAKI 250TR, Others
Satisfied
I purchased this product to relocate the Blinker when converting to Separate Handlebars. I am satisfied with the quality and feel. View detail
Satisfied
Good design. A little expensive. Installation is quite Large. View detail
SR400 Electrical Equipment Plate installation
Shallower than expected, Battery feels less secure. View detail
Fits: その他 , KAWASAKI ESTRELLA , KAWASAKI W400, KAWASAKI W650
Common practice.
This is a Custom that was also done by SR.
The idea was to change the light case to NORMAL and only change the bracket to increase the classic look.
The cleanliness of the Aluminum Buffing makes me choose Wellington.
You just need to convert from Normal light stay.
good point
Aluminum buffing is clean and easy to clean.
●It will be Style as aimed.
A bad point
It is easy to break because it is aluminum.
The exchange is quite Large strange.
This kind of parts are useful for customization to enhance the atmosphere of the original style.
And the quality of the parts is very high!
View detail
Basically, you look good in everything!
Repeat and use.
It can be used with OEMLight and Lucas type, and it is a hidden masterpiece that can create atmosphere.
Aluminum Buffing is a nice touch.
I'm currently using it with the LucasLight case, and there was a time when I was using it with OEMLight.
What I like about it is that it's versatile and universal Style.
good point
If it is Light of 180 Pi Size, Large body can be used.
Aluminum Buffing is really beautiful.
Even if you put it on the OEM Light, it will give you a British car look.
You can also attach a blinker to the bracket hole.
A bad point
A little fragile.
It is a universal part, a much loved part.
The most suitable for English style Custom, but also suitable for Custom with OEMPlus feeling.
The chicli feeling like OEMParts.
I buy them again even if they break. That's how much I like this Parts.
View detail
It is not a dedicated product.
The official Site says it is a special product and Bolt On installation, but it is not.
There is no space to fit the wiring, so I had to cut the bullet terminal and shorten the wiring to the limit and connect it directly. It is not possible to put it in. It's a shame because it's a Universal Product.
View detail
It's a great way to change the atmosphere without changing the light!
Used on SR400.
Initially, I was going to use this Bracket and replace it with a Lucas type Headlight case, but since the matching with the Normal light was good, I used it as is.
good point
The buffing is really clean, and I wipe it down whenever I have time (laughs).
For 70's style motorcycle such as SR, CB400ss, etc., it has a good feeling as if it was OEM from the beginning.
Bracket angle is also good, the optical axis never changes.
A bad point
It's a beautiful BUFFING, so you have to clean it very often.
It's quite sensitive to shocks. If you fall, it will break easily.
I think it's a good part for User who wants to ride Large cut, including good and bad parts.
Small changes such as Blinker and Light Bracket can change the atmosphere of the motorcycle.
View detail
I think it's a bad product
Installation was completed, and Position was lighted up, but because Stop-lamp does not light up
When I checked the Socket, I found that the construction of the Socket was too poorly made and contacted with Lamp Because of the difference in the size of the Solders to be used, the Lamp does not contact the Socket and the Stop-the lamp would not light up It has a packing between the mount and the lens, but there is a gap and rain will definitely get in I think it is a poor product for the price I bought a different product and reinstalled it You should at least check the lights to make sure they work
View detail
Fits: その他 , HONDA CB400SS, YAMAHA SR400, YAMAHA SR500
Aluminum rust will appear and needs to be polished regularly
The shape is a little too punchy to match with Classical Style
I think it's a good idea to match it with a high performance system
Since the fork diameter is the same as SR400, you can use the same fork
It's not too difficult to install, just remove the Top Bridge and fit it on top
The bolts around the Top Bridge, such as Stem Nut, will have a great effect on the stability Make sure you tighten the torque wrench to the specified value
The rust of Aluminum floats a little bit due to aging, so I sometimes use PIKAL to polish it Let's
If you don't bother to take care of it, it will turn white
View detail
cheap!
I bought it because I changed SR 400 to electric type Tachometer.
Since O-ring is not attached, I think that it is good to separately purchase OEM Parts Number of 93210-14104 59 separately!
Things of with O - ring are coming out from other companies, but since this one is overwhelmingly inexpensive, it is Recommendation (` - ω - ´)
View detail
Installed in model 2004 RH 01 J
Making is solid.. I think that you do not need to be conspicuous even after installation.
However, it was very difficult to install.
Handling Instruction Manual It is hard to understand, Screw, Nuts are not likely to be used as it is, I bought Nut again at home center and installed it by trial and error.
CDI mounting holes do not seem to have Gap in their year.
View detail
Used for rh01j
If I grind with METALCompound it will shine and the Reverse side blew Clear for just in case, but in 1 year use it is rust etc etc. There is none.
At the same time I made a Separate handle of Fork Mounting after a while I noticed that this Bracket faced ↓ and attached directly under the Handlebar where the Clutch Cable rubbed and the coating of the Cable was scratched.
Currently it is up just above Three-Pronged Fork, up.
View detail
Well made kit that fit perfectly. The plate licence plate adapter has different hole spacing than the North American ones but not too difficult to adapt.
Well made kit that fit perfectly. The plate licence plate adapter has different hole spacing than the North American ones but not too difficult to adapt. View detail
Fits: SUZUKI GRASS TRACKER, SUZUKI VOLTY, KAWASAKI 250TR, Others
Since migration of a Blinker will be required if a Separate handle is used, it purchases by a Set. It is good to be attached simply.
Since migration of a Blinker will be required if a Separate handle is used, it purchases by a Set.
It is good to be attached simply.
View detail
Since the product of a Fender, a Muffler, and the company was chosen, it united, and it purchased also here. Texture is highly satisfied although it is simple.
Since the product of a Fender, a Muffler, and the company was chosen, it united, and it purchased also here. Texture is highly satisfied although it is simple. View detail
It purchased according to changing a light. A Stay somewhat long at slight thinness has a circumference of a light visible to a SMART rather than a Stay besides .
It purchased according to changing a light.
A Stay somewhat long at slight thinness has a circumference of a light visible to a SMART rather than a Stay besides
.
View detail
It is made to a Ska tune, attaching a wearing easy ! pure Battery with budget prices.
It is made to a Ska tune, attaching a wearing easy ! pure Battery with budget prices. View detail
The Design of the thing which suits others was not pleasing and it chose this.
The Design of the thing which suits others was not pleasing and it chose this. View detail
Fits: SUZUKI GRASS TRACKER, SUZUKI VOLTY, KAWASAKI 250TR, Others
Although attached by its own Stay, somehow, it was not felt refreshed but was searching. a price -- cheap -- attachment -- a can Tan -- I thought if it is found earlier.
Although attached by its own Stay, somehow, it was not felt refreshed but was searching. a price -- cheap -- attachment -- a can Tan -- I thought if it is found earlier. View detail
[Webike Monitor] Since the position of the pure Meter fell as expected and the position of the Headlight was also lowered, the circumference of a Handle felt some refreshed. However, since a Bolt becomes unreserved, appearance is not good. Using this ch
[Webike Monitor] Since the position of the pure Meter fell as expected and the position of the Headlight was also lowered, the circumference of a Handle felt some refreshed. However, since a Bolt becomes unreserved, appearance is not good. Using this cheap product cannot recommend you the direction which cares about a Design. View detail