Reviews
Fits: HONDA MONKEY
3-pole coupler connector
Quality and texture information is no different from the std product It is compatible with Honda Std products for its usability You should have a wire stripper to buy together It's easy to install Buy based on cost performance and comparative brand preference with other products WeBike packaging is always great, arriving in a week for delivery and packaging Concerns, precautions, or advice on purchase If you connect the cable incorrectly, it is difficult to reunite There should be no failure from the beginning View detail
Power Supply Branch
I wanted a 110 2-pole terminal for charging and connection.:I wondered if it was a good idea since it is a Set, but substitutions with other inexpensive items would have sufficed. View detail
Terminals Waterproof and for insulation
Used for the crimping part of the Brake terminal.
Mainly for waterproofing purposes. To be honest, I thought two Shrinks would be enough, but I was attracted to the fact that there are various types of Covers and that they come with a Case. I will keep it for a while because I can use it in case of emergency.
View detail
It fits in 4LMONKEY's Headlight.
This is the only 120km/hMeter that fits in 4LMONKEY's Headlight at this time, so I bought it anyway and tried to fit it in.
The accuracy of the meter is a bit questionable, but it is better than the OEM meter that only displays up to 55 km/h.
View detail
Relay for WideWatt
Blinker easily replaced as a dress-up
When you pursue the best visual by changing the light bulbs, LEDs, and so on, you inevitably need to buy the right Blinker relay at the right time, but this product is WideWatt compatible, so you can mix and match LED bulbs and LEDs as well.
If you are concerned about the Type, which makes a ka-chica-chi sound, buy a different product.
View detail
I wonder if it could be a little cheaper, I'm looking for 8cm re-release.
Used for Clutch Cable of THRUXTON900
A little short. Is the 8cm one discontinued?
I cut and add the for Motorcycle's and use them.
It's expensive, isn't it? How about half price?
View detail
Fits: HONDA MONKEY [Monkey] 5L, HONDA MONKEY [Monkey] 5L
Satisfied with appearance, dissatisfied with durability
I was satisfied with the appearance, but the blinker attachment part broke after 300km of installation. If you use the NORMAL or STANDARD type, you may need to reinforce it. The price is right, so this is a product for people who can handle it. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY
To the DAX.
I bought it because I had accumulated a lot of points.
I don't run at night, so it was fine to leave it off separately.
But isn't it expensive? With one bulb.
View detail
Fits: HONDA CT110 HUNTER CUBCT110, HONDA APE 50
Harness if you're willing to make your own
I put it on to make KSR80 MFBattery
I drove around 1,000km after the replacement, but there is no problem
In the OEM state, only the lights are regulated, so the MFBattery is set as is There are lingering concerns such as the lifespan being reduced to Large widths when loaded
There is a coupler connection to Harness on the car body side, so I made it myself You can install it by inserting the Harness
If you understand the wiring, you can remove the OEMRegulator because the lighting system can be put together You can
There is no problem in operation even if you leave the OEMRegulator, so you can leave it as insurance I guess I took it off after I rode it for a while
For wiring diagrams, it is possible to find out about them with a Net search without a Service Manual No information is available You will need to mend the information you need from multiple sites
In addition, the year of the last model is from Kawasaki as Recall It is safer to use RegulatorKit which should be available I think
View detail
Quantity : Purchase Set items
To finesse Wiring, 0. Since it is common to use Size less than 3sq, Shrinkable Tube also wanted Small Size. I thought about buying only 2 mm Tube, but since it is imprecisely Quantity with abundant Size with Case : I bought a set item
Performance is the same as other Tube. , The shrinkage factor is about 50%. It was easy to use because it was short cut shortly from the beginning
Shrinkable Tube is a necessity if you finger Wiring, Quantity with abundant Size : It is convenient because you will not buy it after you purchase a set item
View detail
Fits: HONDA MONKEY
Tail lamp for installation
I did not sell it near the Tail lamp installation, and I sold the two pole, quadrupole Coupler ... Three poles was saved because I could install the Tail lamp safely. View detail
Fits: HONDA MONKEY
Purchased for GORILLA's EngineWiring Coupler broken
I could have connected it one by one with a round Bullet Terminal, but I bought this Coupler from the appearance and ease of maintenance
Wiring diagram etc on connection. You do not have to look at it, and when putting the Engine on another Frame, it is handy as well as an OEM because it is one Coupler
View detail
Fits: HONDA MONKEY
it is normal
It is similar to the product dealt with in Emon and KITACOConvenience. I wanted 3-pole so buy it for price adjustment. There is no problem with installation. Well, as it is. Apart from using 3-pole it is Rear brake, is not it that people who change to outside tail buy? It is easier than using mothers and children.
View detail
Fits: HONDA CUB90, HONDA CUB 93- C50-040001- *Except for Custom, HONDA LITTLE CUB AA01-3000001-, HONDA CUB70 , HONDA LITTLE CUB C50-4500001-
It is still made abroad.
As written in the Impression of the other person, I had a hard time at the time of installation (Lol)
Although the Socket is too loose, it lights up at the time of provisional attachment but when I tightened Cover Screw, the contact was bad and did not light up.
There is not trouble at present for a while with a little processing, but I do not know when it will be wrong. Lol
After all it is limited to JAPAN.
Yellow Lens is quite fond of it.
View detail
Fits: HONDA CUB90, HONDA CUB 93- C50-040001- *Except for Custom, HONDA LITTLE CUB AA01-3000001-, HONDA CUB70 , HONDA LITTLE CUB C50-4500001-
Headlight I want to exchange ...
It was a product I was curious about a while ago, and I tried to buy the meaning of Imechen this time.
I bought Made in Taiwan and other people's reviews and I bought it, but as I thought you were all written.
When I installed it and tried Engine, it turned on without turning on and checking it out, the Bulb Socket part was loose, the contact was bad and I did not energize.
I managed to handle it constantly, but the optical axis was up too much, I think that it will be fine if you adjust it ...
Even though it was a bit expensive, I was also keenly aware that it was limited to JAPAN.
I became Imechen and I made three stars because I do not mind except for the Socket part.
View detail
Fits: HONDA MONKEY
Attractive price
Replace Meter gear with 8Inch → 10Inch foil.
I am satisfied because I was functioning properly and I bought it at an affordable price.
And how about durability.
View detail
Fits: HONDA MONKEY
MINIMOTOMinimoto Honda 12Vfor MONKEYMain Hone
I bought 12 v MONKEY about 20 years ago and purchased low price MINIMOTO Main harness for Restore. Coupler also matched with OEM without change, but 1 pc1 pc also feels thin line. I have not confirmed final confirmation yet, but I am a bit uneasy. View detail
Fast shipping as usual. Build quality is plastic and cheap, the button is not smooth and stuck sometime. Next time, I'll go with daytona or Posh.
Fast shipping as usual. Build quality is plastic and cheap, the button is not smooth and stuck sometime. Next time, I'll go with daytona or Posh. View detail
Fits: HONDA MONKEY
The thing with cheap and sufficient form is satisfying.However, has the Size of the Tail lamp lens become the 20 square centimeters too small and demanded of the area of a Stop lamp by law? It is quite delicate.In addition, the yellow line was used for th
The thing with cheap and sufficient form is satisfying.However, has the Size of the Tail lamp lens become the 20 square centimeters too small and demanded of the area of a Stop lamp by law? It is quite delicate.In addition, the yellow line was used for the Grand line and the black line was used for Tail light +.I think that it is a clear mistake.I think that it will become goods to which a complaint attaches and which do not have appearance if the
above-mentioned two points are improved.It is regrettable.
View detail
Fits: HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA SUPER CUB 50
Although it was which I regard as the ability to use as it is with budget prices, he had a feeling that light spread too much.
Although it was
which I regard as the ability to use as it is with budget prices, he had a feeling that light spread too much.
View detail