Reviews
Fits: HONDA CB400FOUR (air-cooled), HONDA CB400FOUR (air-cooled)
Thank you
I replaced the screw part that was cracked. It is an old motorcycle and I am thankful that I have the parts. View detail
Fits: HONDA CB400FOUR (air-cooled), HONDA CB400FOUR (air-cooled)
Thanks for keeping it in stock.
It's new and feels good to ride. It's the first place I go when I ride. View detail
Fits: KAWASAKI Kawasaki Others
I could use it on a regular Blinker.
I have a KDX125, and since the blinker stopped winking, I thought Relay was the cause and replaced it. The model number was different from the one that originally came with it, but the shape and the +− of the terminal were the same, so I used it. I did not modify the terminals or anything, just replaced them. The product said it was an LED, but it worked fine with a regular Blinker. View detail
Blinker replacement for Z1R
Lens of Z1R's Rear blinker only Lens was lost during the run, so Quantity:Pair (for Left and Right) The OEM product is no longer available, so I had to settle for Ripro, but even with Ripro, the product was highly accurate and easy to install. The product arrived earlier than expected and in time for our scheduled touring. View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
Be careful when using OEMTail lens
When we contacted the Manufacturer, we were told that there is no Release for Lens case only, so we are not able to get the Quantity:Set purchased. (OEM inventory is currently unavailable)
It has an internal reflector and a grounding wire (which is not included in most Universal Products), and it is a good product, but the details are not well made. This may be due to individual differences in production lots.
I would like to see at least an insulated Cover on Bullet Type Terminal. It is Large strange to put it in afterwards.
Lens is not similar to OEM.
Reflector is totally different from OEM in structure and reflectivity, only on Lens side and Reflector doesn't pass EURO standard?
Tail appears to be small when seen from a distance, coupled with the slightly darker red color. This image is a little too small.
For these reasons, Lens wanted to use OEM, but it does not match Case.
This is also the case with other Universal Products, where the circumference of the Lens end is one size smaller than that of the OEMLens.
This is a small difference, but when it comes to the circumference of the case, the difference is quite large and does not fit into the groove of the Case.
Lens mounting Screw hole position is also slightly displaced.
I thought that MTEC, which offers many OEM alternatives, might be able to help, but no.
OEMLens not available] I would like it to be indicated as
When using OEMLens, it is necessary to work very hard on the Case side to prepare for rusting by Wound.
Make Lens and Case of the same size as OEM anywhere~.
I think there are quite a few people who are having trouble with OEMCase because of rust and decay.
View detail
Fits: KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000 (air-cooled), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
Tachometer Cable50mmLong
I had a hard time deciding between this and the 3 cm long D company, but this was the only one in stock, so I decided to go with this one.
As a result, my Z-chan has Oil cooler (6 steps) and also MeterUp, so 5cm Long was just right.
I had forgotten about this because it is not an item that is rarely attached or detached, but when attaching the upper (meter side) mounting nut, use tape or something to stop it from slipping off. If it falls off, it will be very troublesome.
Especially, the CUB issue is in the cover, and it is very troublesome.
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
Ripro after all
If I could, I wanted to re-plating and use the OEM rusted products I had on hand.
Decided it was faster to buy than re-Plating and bought it.
Component accuracy is still not as good as OEMs.
I can correct the bending over here, or make an adjustment bending in the OEM light case.
Plating frame and light unit at the outermost edge of the frame is set to Quantity:The gap on the circumference of the Plating frame in the Set is biased.
View detail
Fits: KAWASAKI Kawasaki Others
It can be used with 2Pin or 3Pin and responds quickly.
If you have an old car, you can use the Z1 2-pin or CB750Four 3-pin, and if you don't care about the OEM type, the blinker will respond faster than the contact type, which is also good for safety. View detail
Fits: KAWASAKI Kawasaki Others
Very responsive to Linear.
Because of the old motorcycle, the contact type OEM product operates with one-tempo13 delay from the switch operation, but this product operates linearly, which is good for safety if you are not concerned about OEM. View detail
Fits: KAWASAKI W1SA, KAWASAKI MACH H2A, KAWASAKI MACH H2
Ignition Switch
Great with qualitiy . Installation was straight forward and the best part it Looks great! Will and use parts from webike when parts are avaible for my bikes. View detail
Fits: KAWASAKI Kawasaki Others
I can use it without problems
It's a little bit old motorcycle, so it doesn't light up immediately after pressing the switch, and there is a time lag. The price is not too high and it seems to be reliable, so I chose it. View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
I just wish the colors were longer.
Quantity available at 1/6th the price of OEM Parts:If you don't care about the quality of the damper rubber, this is a good Quantity because the parts are hidden inside the meter cover.:I think it's Set.
However, if the collar were a few millimeters longer, the Meter would move more wobbly and absorb shock.
View detail
Fits: HONDA CB400FOUR (air-cooled), HONDA CB400FOUR (air-cooled)
Processing and diversion to MONKEY125
I was attracted by the classic look of this product.
I had to do some modification to get it to fit on my Monkey 125, but I was able to get it to fit.
I really like the way it looks.
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
I know it's cheap, but...
It is cheap, and the quality of Plating is better than P Corp.
The only thing I can say about RiproManufacturer's Blinker Bracket in general is that why can't they make the with Bracket umbrella spread to the OEM shape?
I guess it's RiproManufacturer that says you can't go beyond OEM.
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
Save more than OEM
This Quantity:80% of the set will still be available as OEM parts, but 4 pieces of 2 types of RubberDamper from Headlight side will be discontinued.:I compared it with OEM Parts and there seems to be no problem. View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
On the Base of Smoked lens
Dye the Lens Black. [Color] I used it for Base to process Smoke.
The price of OEM Lens has also skyrocketed. With this Lens, in case [Color] Even if the Smoke process fails. (Even if it's dyed too Black) I don't think I have that much mental Damage.
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750-1000, KAWASAKI Z750, KAWASAKI Z1000, KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750-1000, KAWASAKI Z750, KAWASAKI Z1000, KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750-1000, KAWASAKI Z750, KAWASAKI Z1000
Increased durability
I had to replace it because it suddenly broke while driving.:I think it will be more durable because it is made of Gold instead of Plastic.
Because the Bullet Type Terminal of Wiring from the vehicle body was loose, I replaced the terminal.
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
Safe and reliable Nikkosan products
I replaced the bracket of Universal Type Horn of other RiproManufacturer because it was broken.
It is made by Nikko. I think it is close to the OEM Initial Model. The tone is also quite austere.
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
Suitable for Processing Base
The Number mounting part has been processed so that the Number can be mounted lying down. It is the best for processing Base. View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
pleasant feeling
LargeHumanly, I became a Parenthesis. View detail