Reviews
This was required after Inner cowl removal of OEMCowl.
[How is it used?
I removed the in-cowl to improve serviceability during MachineMaintenance after the Sports run,
The Meter cannot hold as it is and is used to prevent this.
Was the one you received as per Image?
Simple structure, but functional enough.
Was the installation difficult?
Once the inner cowl is removed, the Bracket itself is easy to install.
How was your experience with it?
The Meter does not shake due to vibration and is very rigid. Durability is yet to be determined.
[Included Parts:were they on?
Screws necessary for installation were included.
[Was there anything that disappointed you?
nothing special
Other items that would be helpful
Originally designed for racing cowl, but can be installed on OEM OuterCowl.
An Instruction Manual was also included and we had no trouble installing it.
View detail
We hope that GSX-R125User on the Circuit will find it useful!
The NORMAL Meter Bracket can only be used with a Normal cowl.
It is easy to install, strong, and highly recommended.
View detail
The paint job is too shoddy.
It has Black stains and the paint is slightly peeling and bumped. View detail
The fact that Lineup exists is a miracle in itself.
Purchased for use at a driving event.
It is a miracle that there is a Lineup even though the car is out of print. Thank you for making it.
It is very difficult to find parts that are no longer in production, but we are very grateful to Saiya for still making them.
It will take some time for delivery, but if it is available, the wait will be exciting.
View detail
For Circuit
I ported the Rubber Bush from OEM Mount and installed it. The size is Exactly the same and the meter is Refreshing. View detail
New, but scratched and chipped.
I don't know if they ship them without inspecting them or if it's a bad way to manage inventory, but it's very disappointing to sell them in such a condition. View detail
I am satisfied
it was for gj72a
Probably quite a long time in stock
The dirt was terrible
It was the explanation for attaching it with double-sided tape, but if you make holes at the top and bottom, you can make it tomorrows
View detail
"This is the impression of Saitaniya light cover for 89'TZR250 (3MA). I purchased for a circuit run. Since atmosphere is also important although taping may be sufficient, a black gel coat was chosen like SP race of those days. Attachment is done by a doub
"This is the impression of Saitaniya light cover for 89'TZR250 (3MA). I purchased for a circuit run. Since atmosphere is also important although taping may be sufficient, a black gel coat was chosen like SP race of those days. Attachment is done by a double-stick tape. However, since it is a gel coat finishing, the plate back face to paste is a netted pattern and it is easy to separate in attached double-stick tape and it is uneasy in a circuit. Then, I used a powerful double-stick tape. Moreover, if a genuine screen attachment screw is used, attachment will become possible more certainly. In that case, opening hole processing is needed for a number plate. A fit feeling is satisfactory. The knuckle guard (1KT/3MA) peculiar to TZR is also fitted perfectly. Since cost performance is also good, I'm satisfied. For those who consider to purchase, it is recommended. If the number plate of this sort of this model is looked for, Saitaniya products will be reached inevitably. It is appreciated that it manufacturs in this age ." View detail
"This is the impression of Saitaniya light cover for 89NSR250R (MC 18). I purchased for a circuit. Since the car body is 89SP, a white gel coat was chosen on the assumption that it paints in green. If it is fixed only by double-stick tape, since it is une
"This is the impression of Saitaniya light cover for 89NSR250R (MC 18). I purchased for a circuit. Since the car body is 89SP, a white gel coat was chosen on the assumption that it paints in green. If it is fixed only by double-stick tape, since it is uneasy in a circuit, I used the bolt of the genuine upper cowl and light upper part, and it is fastened together. A bolt hole was processed. I used a powerful double-stick tape. Although the number plates sold in 80's to 90's were a genuine number sticker and the form, this number plate is small in vertical direction and big in a horizontal direction. It may be ok somehow. However, it is great in cost performance." View detail
Since it was town riding, the slit was chosen. Since it was a paint application base, he wiped the clear, after painting still blacker. Attachment is attached with attached double-stick tape. For the moment, it has not separated. I think t
Since it was town riding, the slit was chosen.
Since it was a paint application base, he wiped the clear, after painting still blacker.
Attachment is attached with attached double-stick tape.
For the moment, it has not separated.
I think that it can use somehow night also since it has shone once if Wright is followed.
The place with few lights considers that it is better to stop.
I think that it is good for a little makeover!
View detail
Fits: HONDA NSR250R
600RR replica In the elegance only for a single seat, looks and use were also satisfactory. However, a drilling process is required for the main part of a single seat, and processing is somewhat needed.
600RR replica In the elegance only for a single seat, looks and use were also satisfactory.
However, a drilling process is required for the main part of a single seat, and processing is somewhat needed.
View detail